Ludeca, Inc.
Doral, FL 33172

Portable Vibration Analyzer features full color VGA display.
With Fmax of 51 KHz and up to 102,400 lines of resolution, VIBXPERT II is suitable for capturing and analyzing machinery problems. Basic 1-channel device can be user-upgraded at any time to 2 individually configured channels via passcode. All forms of machine vibrations, bearing conditions, process data, and visual inspection information can be collected and stored on expandable CF card for...
Read More »
Shaft Alignment Tool helps eliminate human error.
Powered by rechargeable batteries, SHAFTALIGN-® features TFT backlit color display that shows all relevant alignment results on one screen. Auto-flow capability, which delivers Dimension-Measure-Results functionality, guides user to obtain desired machinery alignment condition, and Active Clock measurement mode automatically collects laser coordinates for corresponding shaft position. Unit...
Read More »
Centralign® Ultra Expert
Reduce steam and gas turbine outage time using laser alignment CENTRALIGN ULTRA was specifically developed for the alignment of steam and gas turbines. The system precisely aligns internal elements with upper halves installed or off, for distances up to 133 feet. Accurate bore measurements can be acquired without interrupting other work taking place in the turbine; saving time over traditional...
Read More »
Shaft Alignment Instrument is targeted for wind power industry.
OPTALIGN SMART WIND System is configured with firmware features that ensure measurement accuracy and mounting hardware that is suited for optical alignment of gearbox and generator shafts in wind turbines. Instrument includes Continuous Sweep Mode, static measure mode with up to 8 measurement positions, color backlit TFT screen, and ability to save up to 500 measurement files.
Read More »
Balancer/Analyzer is designed for wind industry.
VIBXPERT Balancer and Analyzer addresses challenges of wind turbines, which turn at very slow rotational speeds. With its built-in wind balancing program, software, accelerometers linear to 0.1 Hz, speed sensor, and balance grade tolerance chart (G16), portable system is suitable for use in situations of mass unbalance of wind turbine rotor blades.
Read More »
High Precision Electronic Inclinometer
INCLINEO is a powerful level/plumbness measurement system utilizing high precision electronic inclinometer technology with a resolution of 0.0003 degrees. In combination with interchangeable mounting bases INCLINEO measures relative or absolute angularity, flatness, levelness, or parallelism of surfaces; as well as plumbness of vertical shafts, perpendicularity of planes, and straightness along a...
Read More »
Vibration Analyzer for Hazardous Areas
VIBXPERT EX, the new intrinsically safe two-channel FFT data collector and signal analyzer for monitoring and diagnosing machine conditions in the chemical industry, refineries, grain processing facilities and in any other potentially hazardous environment that requires explosion proof systems. The VIBXPERT EX features 102,400 lines of resolution, simple joystick operation, acceptance...
Read More »LUDECA Shaft Alignment Tool Wins Plant Engineering Award
The OPTALIGN SMART has been awarded the Gold in the 2007 Plant Engineering Magazine Product of the Year Competition - Maintenance Tools & Equipment Category. Awards will be presented at the Manufacturing Summit in Chicago next March. This is the second award for the OPTALIGN SMART tool which was also awarded the International RedDot Product Design Award in 2007. LUDECA, INC. 305-591-8935...
Read More »
Alignment System facilitates rotating equipment maintenance.
Suited for maintenance work on rotating equipment, OPTALIGN-® smart laser shaft/coupling alignment system features modular concept that enables users to design their own shaft alignment system. Alphanumeric keyboard with navigation, menu keys, and help text produces screen picture of measurement results. It also includes automatic continuous sweep measurement mode that evaluates hundreds of...
Read More »
Shaft/Coupling Alignment System uses single beam technology.
Rotalign-® ULTRA utilizes 5-axis, 2-plane sensor and built-in electronic position detector for simple to complex alignments. It features scratchproof backlit color screen and backlit keyboard suited for any working condition. Accurate data for shimming and horizontal correction are obtained from continuous SWEEP measure mode. USB and Bluetooth-® connectivity is provided for interface with...
Read More »
Portable Vibration Analyzer features full color VGA display.
With Fmax of 51 KHz and up to 102,400 lines of resolution, VIBXPERT II is suitable for capturing and analyzing machinery problems. Basic 1-channel device can be user-upgraded at any time to 2 individually configured channels via passcode. All forms of machine vibrations, bearing conditions, process data, and visual inspection information can be collected and stored on expandable CF card for...
Read More »LUDECA Opens LUDECAwind Division
PRÃFTECHNIK and LUDECA, Inc. (U.S. partners) operate as suppliers for portable and online remote monitoring systems and expert service providers. With more than 1,000 VIBROWEB-® XP online monitoring systems sold worldwide, PRÃFTECHNIK and LUDECA have a strong presence in the wind industry. The Germanishe Lloyd (GL) Wind certified VIBROWEB XP Wind online monitoring system was developed...
Read More »
Shaft Alignment Tool helps eliminate human error.
Powered by rechargeable batteries, SHAFTALIGN-® features TFT backlit color display that shows all relevant alignment results on one screen. Auto-flow capability, which delivers Dimension-Measure-Results functionality, guides user to obtain desired machinery alignment condition, and Active Clock measurement mode automatically collects laser coordinates for corresponding shaft position. Unit...
Read More »LUDECA Holds Annual Sales Meeting
Doral, Florida - At LUDECA's annual sales meeting, management, sales representatives and company employees shared the company's strategic plans for 2010 and prepared for the market launch of the latest additions to LUDECA's product line up which include the new SHAFTALIGN shaft alignment system and the new HYDRALIGN continuous foundation monitoring systems by PRUEFTECHNIK. The four-day event...
Read More »
Centralign® Ultra Expert
Reduce steam and gas turbine outage time using laser alignment CENTRALIGN ULTRA was specifically developed for the alignment of steam and gas turbines. The system precisely aligns internal elements with upper halves installed or off, for distances up to 133 feet. Accurate bore measurements can be acquired without interrupting other work taking place in the turbine; saving time over traditional...
Read More »
Shaft Alignment Instrument is targeted for wind power industry.
OPTALIGN SMART WIND System is configured with firmware features that ensure measurement accuracy and mounting hardware that is suited for optical alignment of gearbox and generator shafts in wind turbines. Instrument includes Continuous Sweep Mode, static measure mode with up to 8 measurement positions, color backlit TFT screen, and ability to save up to 500 measurement files.
Read More »
Balancer/Analyzer is designed for wind industry.
VIBXPERT Balancer and Analyzer addresses challenges of wind turbines, which turn at very slow rotational speeds. With its built-in wind balancing program, software, accelerometers linear to 0.1 Hz, speed sensor, and balance grade tolerance chart (G16), portable system is suitable for use in situations of mass unbalance of wind turbine rotor blades.
Read More »David Atehortua Joins Alignment Division
David Atehortua, graduate from the University of Florida with a Bachelor of Science degree in mechanical engineering, has joined LUDECA's Alignment division to support customers and regional distributors with applications related to machinery alignment and geometric measuring. His previous experience includes electro-mechanical equipment design, CNC programming as well as aircraft and aviation...
Read More »
High Precision Electronic Inclinometer
INCLINEO is a powerful level/plumbness measurement system utilizing high precision electronic inclinometer technology with a resolution of 0.0003 degrees. In combination with interchangeable mounting bases INCLINEO measures relative or absolute angularity, flatness, levelness, or parallelism of surfaces; as well as plumbness of vertical shafts, perpendicularity of planes, and straightness along a...
Read More »Investing in the Future - New High-Tech Lab
PRUEFTECHNIK Alignment Systems, the pioneers of Laser Shaft Alignment Having recently inaugurated a newly-built High-Tech Lab in Ismaning, Germany, PRUEFTECHNIK Alignment Systems - LUDECA's principals - strengthens its technological prominence and abilities in measurement technology. The lab includes 2 large granite tables (20 ft. x 6-1/2 ft. and 36 ft. x 1-½ ft.) weighing 12 and 11 metric tons,...
Read More »