Three M Telecom Systems
Austin, TX 78726
Share:
Connector for microSD Cards has compact design.
RoHS-compliant 2900 Series measures 11 x 15 x 1 mm, with actual footprint of 14.0 x 14.2 x 0.8 mm, and can be used in phones that use removable flash memory cards. Card is locked when mated and can be removed using smooth push-push eject mechanism. To promote card retention, capture mechanism prevents memory card from flying out upon ejection. Card detection indicator displays whether card is in...
Read More »Ribbon Connectors suit Camera Link and mini CL applications.
Using ribbon contact system with 0.8 mm contact pitch, polarized, board-mount Shrunk Delta Ribbon Connectors are constructed of high-temperature plastic with 30 micron gold contacts and stamped metal EMI/ESD interface. Installed jack socket supports corresponding assembly thumbscrew interface. Utilizing 28 AWG cable and wiring configurations that meet legacy Camera Link specifications, Cable...
Read More »
Feedthrough System providess high-density solution.
Single-Mode OGI Multi-Fiber panel-mount and backplane feedthrough system includes multi-fiber cable assemblies, multi-fiber fan-out assemblies, panel-mount couplings, daughter-card couplings and backplane couplings. Panel-mount couplings come in single- and 4-port versions. Backplane blind-mate quad couplings hold 4 OGI connectors, each of which houses 8- or 12-fiber MT ferrules in Ã-½ in....
Read More »
Connectors work in temperatures from -40 to 185 deg F.
Hot Melt ST, SC, and FC fiber optic connectors are approved for indoor and outdoor use as single-mode and multimode connectors. They meet EIA/TIA 568B standards for outdoor applications, and incorporate reheatable adhesive technology and physical contact, pre-radiused zirconia ceramic ferrule technology. Insertion loss values are less than 0.2 dB. Single-mode and multimode units are tested to...
Read More »Erbium-Doped Fibers operate in C-Band and L-Band.
Rare-earth FS-ER-7A28 and FS-ER-7B28 are for use in C-Band and L-Band, respectively. Both work in erbium-doped optical amplifiers (EDFAs) and amplified spontaneous emission (ASE) sources, and use common fusion splicing equipment. High erbium concentration results in fiber lengths that can be substantially reduced to meet desired gain.
Read More »Fiber Pigtails cut manufacturing costs.
Fiber pigtails allow solder to be reflowed multiple times for optimal fiber alignment, without solder pull strength or metallization degradation. Assemblies improve performance of edge emitting devices by increasing light coupling efficiency with wedge fiber lens and AR coatings. By using components on single-mode and polarization maintaining fibers, users can improve performance of pump laser...
Read More »3M Cold Shrink Technology is 40 Years Old and Still Protecting, Insulating, Splicing & Terminating
April 18, 2008 AUSTIN, Texas--3M is celebrating the 40th anniversary of its development of cold shrink technology. Specially formulated rubber tubes, stretched on a removable core, are used for electrical insulation, splicing and terminating. No source of heat or extra tools are needed to install a cold shrink accessory. One alternate method of applying accessories uses heat shrink technology,...
Read More »3M Electronic Solutions and Arrow Electronics Sign Global Distribution Agreement
May 16, 2008 AUSTIN, Texas-3M Electronic Solutions Division recently announced it has extended its distribution agreement with Arrow Electronics to include the Americas, Europe and Asia Pacific. The extension of the global distribution agreement is focused on the 3M ESD electronic components segment, which includes connectors, cable, cable assembly solutions and related electronic components....
Read More »3M Announces Agreement with Antares Advanced Test Technologies
AUSTIN, TX - 3M's Electronic Solutions Division and Antares Advanced Test Technologies have signed a global distribution agreement. Under the terms of the agreement, Antares will be authorized to sell 3M Textool branded BGA Test and Burn-In Sockets outside of Japan. This agreement creates the opportunity to aggressively grow Textool BGA socket sales outside of Japan by leveraging the considerable...
Read More »Connector for microSD Cards has compact design.
RoHS-compliant 2900 Series measures 11 x 15 x 1 mm, with actual footprint of 14.0 x 14.2 x 0.8 mm, and can be used in phones that use removable flash memory cards. Card is locked when mated and can be removed using smooth push-push eject mechanism. To promote card retention, capture mechanism prevents memory card from flying out upon ejection. Card detection indicator displays whether card is in...
Read More »Ribbon Connectors suit Camera Link and mini CL applications.
Using ribbon contact system with 0.8 mm contact pitch, polarized, board-mount Shrunk Delta Ribbon Connectors are constructed of high-temperature plastic with 30 micron gold contacts and stamped metal EMI/ESD interface. Installed jack socket supports corresponding assembly thumbscrew interface. Utilizing 28 AWG cable and wiring configurations that meet legacy Camera Link specifications, Cable...
Read More »
Feedthrough System providess high-density solution.
Single-Mode OGI Multi-Fiber panel-mount and backplane feedthrough system includes multi-fiber cable assemblies, multi-fiber fan-out assemblies, panel-mount couplings, daughter-card couplings and backplane couplings. Panel-mount couplings come in single- and 4-port versions. Backplane blind-mate quad couplings hold 4 OGI connectors, each of which houses 8- or 12-fiber MT ferrules in Ã-½ in....
Read More »
Connectors work in temperatures from -40 to 185 deg F.
Hot Melt ST, SC, and FC fiber optic connectors are approved for indoor and outdoor use as single-mode and multimode connectors. They meet EIA/TIA 568B standards for outdoor applications, and incorporate reheatable adhesive technology and physical contact, pre-radiused zirconia ceramic ferrule technology. Insertion loss values are less than 0.2 dB. Single-mode and multimode units are tested to...
Read More »Erbium-Doped Fibers operate in C-Band and L-Band.
Rare-earth FS-ER-7A28 and FS-ER-7B28 are for use in C-Band and L-Band, respectively. Both work in erbium-doped optical amplifiers (EDFAs) and amplified spontaneous emission (ASE) sources, and use common fusion splicing equipment. High erbium concentration results in fiber lengths that can be substantially reduced to meet desired gain.
Read More »Fiber Pigtails cut manufacturing costs.
Fiber pigtails allow solder to be reflowed multiple times for optimal fiber alignment, without solder pull strength or metallization degradation. Assemblies improve performance of edge emitting devices by increasing light coupling efficiency with wedge fiber lens and AR coatings. By using components on single-mode and polarization maintaining fibers, users can improve performance of pump laser...
Read More »