HED - Hydro Electronic Devices, Inc.
Hartford, WI 53027
I/O Module helps control off-road equipment functions.
Solid-state, microprocessor-based CL-411 enables users to monitor several functions and components of off-road equipment. Product, able to serve as master or slave, provides 16 analog, frequency, resistive dependant sensor, and digital inputs. Along with 20 outputs that include PWMs outputs as well as 15 A sourcing outputs, unit features 4 switch-to-ground harness codes for multiplexing, 2 J1939...
Read More »
Module provides multiple inputs in tight spaces.
Suited for controls in off-highway equipment and other vehicles, CANLinkÃ-® CL-202 solid-state, microprocessor-based module incorporates 16 switch-to-battery type inputs and 4 switch-to-ground harness codes that can be used for additional inputs. There are also input configurations for frequency and resistive dependant sensor inputs. Product is furnished with software code that allows it to...
Read More »Module interfaces between joystick and machine controls.
CL-407 module, configurable as slave module in CAN system, has 4 A available on outputs and 60 mA 5 Vdc regulated supply for providing power to external input devices. Features include 2 switch-to-battery or 8-bit analog inputs, three 0-5 Vdc 12-bit analog inputs, and 7 PWM or digital 4 A sourcing outputs. Module is housed in aluminum extrusion NEMA 4 case with Deutsch DT connectors.
Read More »
Color Graphical Display targets off-highway vehicle control.
Suited for in-cab or outdoor applications, CANLink(TM) Graphical System Monitor provides interface with all CANLINK modules, and can be programmed to provide system monitoring, control, and real-time diagnostics. Nine or five sealed pushbuttons can be coded for variety of operations. Gauge displays provide centralized status of equipment operation, while menu screens allow further analysis. GPS...
Read More »
Control Module brings smart features to small vehicles.
Model CL-410 has 8 total inputs, including one frequency or digital input for load control functions, and 7 analog or digital inputs. As single board controller, it offers load shedding and safety interlock features to prevent damage from activity. It delivers proportional control to machine's hydraulics, controls starter and fuel solenoids, and manages interface to ignition key. Model CL-410...
Read More »
I/O Module handles communications to high-power components.
Model CL-408 enables joysticks and other control devices to interface with machine bi-directional servos, valves, and solenoids. Unit can stand-alone or be configured as slave module in CAN system. It provides three 0-5 Vdc, 12-bit analog inputs; 1 frequency or Switch to Ground input; four 15 A, bi-directional servo outputs; three 15 A sourcing outputs; and one 50 mA, 5 Vdc regulated supply....
Read More »
Engine Module can translate SAE J-1939 CAN messages.
HED CL-601 solid-state microprocessor based module communicates information to vehicle components, including analog gauges, indicator lights, and meters. Module provides 8 low-current sinking PWM outputs for driving analog gauges, and 8 sinking On/Off 200 mA outputs for driving indicator lights. Features include NEMA 4 rated enclosures and 4 Harness Code Inputs. Module can be stand-alone gauge...
Read More »
High-Current Module powers CAN systems.
Offered in NEMA 4 rated enclosure, CL-300 module provides 8 PWM or On/Off, sourcing, 15 A outputs, with current feedback over 3 A, in one location. Able to function as slave module or SBC, compact, solid-state, microprocessor-based module fits within mobile equipment. User-configurable maximum current on each output creates Virtual Fuses, and 4-wire harness ID code allows up to 16 Input Modules...
Read More »
Laptop Software supports CANLink components and systems.
Configurator Software permits users to build control logic for complete CANLink system without needing to write special software code. Complete system can be programmed by connecting RS232 serial port of laptop or PC to single module in CANLink system, allowing automatic transmittal of customer created programs to all other modules through system's CAN lines.
Read More »
Software simplifies control system design and installation.
With the use of a PC or laptop, Diagnostic Tool software displays real-time, system operating data generated by CANLinkÃ-® J1939 Controlled Area Network (CAN) modules and systems. Tool enables users to determine if problem is in module, wiring, or external device. System eliminates relay logic and fuses, and enhances safety interlocks through microprocessor technology. In debug mode, software...
Read More »XALT Energy XBV Provides State-Of-The-Art Telematics Data In A Single-Source Solution
Partnership with HED, Inc., offers customers advanced battery data Midland, Mich. As commercial vehicle manufacturers and fleet owners transition to battery electric powertrains, they must manage a new set of mobility variables. Factors like the battery system’s state-of-charge (SOC), overall health, driving range and charging times are crucial considerations in optimizing urban and long-haul...
Read More »Bob Heidenrich Joins HED as VP Sales & Marketing
HED is pleased to announce the hiring of Bob Heidenrich as VP Sales & Marketing. Bob He has over 25 years of sales and marketing leadership experience in the electronics arena. Prior to HED, Bob had a long career moving up through all levels of the sales organization at Xymox Technologies (Milwaukee, WI). Bob will lead sales, customer service, application engineering, and product management teams...
Read More »
I/O Module helps control off-road equipment functions.
Solid-state, microprocessor-based CL-411 enables users to monitor several functions and components of off-road equipment. Product, able to serve as master or slave, provides 16 analog, frequency, resistive dependant sensor, and digital inputs. Along with 20 outputs that include PWMs outputs as well as 15 A sourcing outputs, unit features 4 switch-to-ground harness codes for multiplexing, 2 J1939...
Read More »
Module provides multiple inputs in tight spaces.
Suited for controls in off-highway equipment and other vehicles, CANLinkÃ-® CL-202 solid-state, microprocessor-based module incorporates 16 switch-to-battery type inputs and 4 switch-to-ground harness codes that can be used for additional inputs. There are also input configurations for frequency and resistive dependant sensor inputs. Product is furnished with software code that allows it to...
Read More »Module interfaces between joystick and machine controls.
CL-407 module, configurable as slave module in CAN system, has 4 A available on outputs and 60 mA 5 Vdc regulated supply for providing power to external input devices. Features include 2 switch-to-battery or 8-bit analog inputs, three 0-5 Vdc 12-bit analog inputs, and 7 PWM or digital 4 A sourcing outputs. Module is housed in aluminum extrusion NEMA 4 case with Deutsch DT connectors.
Read More »
Color Graphical Display targets off-highway vehicle control.
Suited for in-cab or outdoor applications, CANLink(TM) Graphical System Monitor provides interface with all CANLINK modules, and can be programmed to provide system monitoring, control, and real-time diagnostics. Nine or five sealed pushbuttons can be coded for variety of operations. Gauge displays provide centralized status of equipment operation, while menu screens allow further analysis. GPS...
Read More »
Control Module brings smart features to small vehicles.
Model CL-410 has 8 total inputs, including one frequency or digital input for load control functions, and 7 analog or digital inputs. As single board controller, it offers load shedding and safety interlock features to prevent damage from activity. It delivers proportional control to machine's hydraulics, controls starter and fuel solenoids, and manages interface to ignition key. Model CL-410...
Read More »
I/O Module handles communications to high-power components.
Model CL-408 enables joysticks and other control devices to interface with machine bi-directional servos, valves, and solenoids. Unit can stand-alone or be configured as slave module in CAN system. It provides three 0-5 Vdc, 12-bit analog inputs; 1 frequency or Switch to Ground input; four 15 A, bi-directional servo outputs; three 15 A sourcing outputs; and one 50 mA, 5 Vdc regulated supply....
Read More »
Engine Module can translate SAE J-1939 CAN messages.
HED CL-601 solid-state microprocessor based module communicates information to vehicle components, including analog gauges, indicator lights, and meters. Module provides 8 low-current sinking PWM outputs for driving analog gauges, and 8 sinking On/Off 200 mA outputs for driving indicator lights. Features include NEMA 4 rated enclosures and 4 Harness Code Inputs. Module can be stand-alone gauge...
Read More »
High-Current Module powers CAN systems.
Offered in NEMA 4 rated enclosure, CL-300 module provides 8 PWM or On/Off, sourcing, 15 A outputs, with current feedback over 3 A, in one location. Able to function as slave module or SBC, compact, solid-state, microprocessor-based module fits within mobile equipment. User-configurable maximum current on each output creates Virtual Fuses, and 4-wire harness ID code allows up to 16 Input Modules...
Read More »