Associated Research

Power Source is designed for OMNIA® series analyzers.
Electrical Equipment & Systems

Power Source is designed for OMNIA® series analyzers.

Designed to work with line leakage and functional run testing capabilities of OMNIA series of electrical safety compliance analyzers, AC1000 power source is used in applications requiring isolation transformer adjustable to 110% of line voltages. It features 1 kVA, programmable software current limits, programmable over-current fold back to maintain constant output current with varying load,...

Read More »
Safety Compliance Analyzer has 500 VA testing capability.
Test & Measurement

Safety Compliance Analyzer has 500 VA testing capability.

HypotMAX(TM) series multifunction electrical safety compliance analyzers perform various product safety tests from one instrument. Model 7700 is 3-in-1 tester with 5 kV ac Hipot @ 100 mA, 6 kV dc Hipot @ 10 mA, and Insulation Resistance testing, and Model 7704 is 4-in-1 tester that adds 30 A Ground Bond testing. Both models, which include auto discharge and remote safety interlock, are fully...

Read More »
Dielectric Analyzers feature voltages up to 20 kV ac/dc.
Laboratory and Research Supplies and Equipment

Dielectric Analyzers feature voltages up to 20 kV ac/dc.

HypotMAX(TM) fully automated dielectric withstand analyzers provide higher output voltage for cable, wire, harness, and electrical component testing. Four models are available: Model 7705 10 kV ac Hipot tester; model 7710 15 kV dc Hipot tester; model 7715 20 kV ac Hipot tester; and model 7720 20 kV dc Hipot tester. Auto discharge and remote safety interlock features limit operator's exposure to...

Read More »
Electrical Safety Compliance Analyzers have graphic LCDs.
Test & Measurement

Electrical Safety Compliance Analyzers have graphic LCDs.

Offered as 4-in-1, 5-in-1, and 6-in-1 models, OMNIA 8100 Series features 50 memories with 30 steps per memory, built-in real current measurement, and RS-232 or GPIB automation interfaces. Base model 8104 contains 4 electrical safety tests: AC Hipot, DC Hipot, Ground Bond/Continuity, and Insulation Resistance. Model 8105 adds Functional Run testing, and model 8106 adds Line Leakage testing. Series...

Read More »
Scanning Matrix offers 10 different configurations.
Test & Measurement

Scanning Matrix offers 10 different configurations.

Used with automated electrical safety testers, modular Model SC6540 automatically makes connections by switching testing outputs of safety tester to correct test point of device under test. Unit allows manufacturers to connect multiple products at one time and cycle through tests. Master configuration can control up to 4 slave scanning matrixes, which provides total of 80 testing ports from...

Read More »
Ground Bond Tester has graphic LCD.
Test & Measurement

Ground Bond Tester has graphic LCD.

Mid-range HYAMP® III model 3140 provides up to 40 A of ground bond test current, continuous duty. It enables users to set up and perform tests and includes VERI-CHEK® verification system and CAL-ALERT® automatic calibration alert system. Able to interconnect with Hypot III model to form complete test system, product has 2U -½ rack mount cabinet design and provides single Device Under Test...

Read More »
Dielectric Analyzer has continuity test mode.
Laboratory and Research Supplies and Equipment

Dielectric Analyzer has continuity test mode.

HypotULTRA® III series includes optional built-in 4- or 8-port scanner and continuity test mode that allows product to perform multi-point or point-to-point continuity tests and hipot tests at voltages up to 5,000 V. Another test mode performs simultaneous ground continuity test along with hipot test. Offerings include SmartGFI® Safety Circuit; VERI-CHEK®, CAL-ALERT®, and prompt and hold...

Read More »
Ground Bond Tester has simplified LCD display.
Test & Measurement

Ground Bond Tester has simplified LCD display.

Mid-range Model 3160 provides 60 A of test current and features VERI-CHEK(TM) verification system and CAL-ALERT(TM) automatic calibration alert system. Unit includes offset function, Kelvin test leads, user-selectable, output-voltage frequencies of 50 or 60 Hz, and provides storage of up to 10 different test programs with 3 steps per memory. Graphic LCD provides simplified menu, allowing...

Read More »
Hi-Pot Tester has graphic LCD with analog bar graph.

Hi-Pot Tester has graphic LCD with analog bar graph.

HypotULTRA(TM) III Series includes Model 7620, 5 KV ac Hi-pot tester, and Model 7650, 5 KV ac and dc Hi-pot tester with built-in Insulation Resistance tester. Built-in bar graph allows users to monitor test results as compared to limit settings. Offerings include SmartGFI(TM) system, CAL-ALERT(TM) calibration alert system, and VERI-CHEK(TM) menu-driven self-verification process. Real current...

Read More »
Rack Mount Kit mounts instruments side by side.

Rack Mount Kit mounts instruments side by side.

Model 38321 2U half-rack mounting kit can be used with Hypot III line of Dielectric Withstand testers, as well as HYAMP III Ground Bond tester. Testers can be interconnected and used in tandem as complete electrical safety compliance testing system. Rack mount kit enables instruments to be mounted side by side in 19 in. rack. It provides necessary flanges for mounting and handles for removal.

Read More »

All Topics