Microchip Technology Inc.

Microcontrollers feature mid-range 8-bit core.
Agricultural & Farming Products

Microcontrollers feature mid-range 8-bit core.

With total of 49 instructions, PIC16F193X Series optimizes program code and data handling. Units include up to 14 KB flash program memory, up to 512 Bytes data RAM, and 256 Bytes data EEPROM. nanoWatt XLP technology on LF versions results in sleep currents of 90 nA, Watchdog Timer current of 500 nA, and 32 kHz timer oscillator current of 600 nA, all at 1.8 V. Additional features include LCD...

Read More »
PIC® MCUs (8-Bit) feature low-power operation.
Agricultural & Farming Products

PIC® MCUs (8-Bit) feature low-power operation.

Operating from 1.8-5.5 V, PIC18F1XK22 series incorporates up to 16 Kb Flash program memory, 64 MHz internal oscillator, and peripheral set with support for mTouch(TM) capacitive touch sensing. Integrated nanoWatt XLP technology enables sleep currents down to 34 nA typ at 1.8 V; Timer1 oscillator currents of 800 nA at 1.8 V, 32 kHz typ; and Watchdog Timer currents of 300 nA at 1.8 V typ. MCUs also...

Read More »
Touchscreen Controller IC is suited for embedded markets,.
Agricultural & Farming Products

Touchscreen Controller IC is suited for embedded markets,.

Featuring built-in decoding and advanced filtering as well as controller-driven calibration, mTouch(TM) AR1000 analog resistive touchscreen controllers provide universal 4-, 5-, and 8-wire support. Additional support is provided for SPI, I2C(TM), and UART communication interfaces. Integral touchscreen decoding algorithms eliminate trial-and-error engineering by enabling applications to receive...

Read More »
SMT 2.4 GHz RF Transceiver Module promotes ZigBee adoption.
Communication Systems & Equipment

SMT 2.4 GHz RF Transceiver Module promotes ZigBee adoption.

Model MRF24J40MB adds +20 dBm transmit power via integrated power amp and -102 dBm receive sensitivity via integrated Low Noise Amplifier (LNA) to IEEE 802.15.4-compliant transceiver, PCB antenna, and discrete matching circuitry. On software side, certified ZigBee PRO protocol stack provides another option for IEEE 802.15.4-based wireless networks using 16-bit PIC® MCUs. Combination of...

Read More »
Four-Channel, 12-Bit DAC incorporates non-volatile EEPROM.
Electrical Equipment & Systems

Four-Channel, 12-Bit DAC incorporates non-volatile EEPROM.

Supplied in 10-pin MSOP, MCP4728 lets designers program input codes, configuration bits, and IÂ-²C(TM) address bits to integral EEPROM so that data is held during power-off time. This makes configuration and outputs available immediately after power-up. Also, each channel can be individually shut down, reducing power consumption to as low as 0.04 µA, to extend battery life. On-chip...

Read More »
Precision, Low-Power Op Amps have low offset voltage.
Communication Systems & Equipment

Precision, Low-Power Op Amps have low offset voltage.

Operating from 1.8-6.0 V, MCP605X/MCP606X/MCP607X series are trimmed in-package to enable low offset voltage (150 Â-µV). Devices are unity-gain stable and operate over -40 to +125°C range. Each offers rail-to-rail input and output that promotes dynamic range. Respective Gain Bandwidth Product (GBWP) ratings for MCP605X, MCP606X, and MCP607X series are 385 kHz, 730 kHz, and 1.2 MHz,...

Read More »
Analog Front End enables inductive touch sensing.
Agricultural & Farming Products

Analog Front End enables inductive touch sensing.

Designed to work with 8-, 16-, or 32-bit PIC® microcontroller or dsPIC® Digital Signal Controller, Model MCP2036 includes multiplexer, frequency mixer, amplifier, driver, and voltage reference. Inductive touch sensing works through plastic, stainless steel, or aluminum front panel, as well as through thick gloves and on surfaces where liquid is present. Housed in 16-pin 4 x 4 mm QFN...

Read More »
Operational Amplifiers include on-chip calibration circuit.
Communication Systems & Equipment

Operational Amplifiers include on-chip calibration circuit.

To minimize drift over time and temperature, 50 MHz MCP65X Series includes mCal on-chip, one-shot calibration circuit that calibrates offset voltage at power-up using internal power on-reset detector, or based upon state of external pin. Units feature rail-to-rail output with output drive current of 95 mA. Housed in 8-pin SOIC, 3 x 3 mm DFN, or 10-pin MSOP package, op amps are suited for...

Read More »
Digital Potentiometers feature low power design.
Electronic Components & Devices

Digital Potentiometers feature low power design.

Available in 5- and 6-pin SC-70 packages, 7-bit MCP401X Series features static current consumption of 2.5 Â-µA, and can be controlled digitally through I2C interface, eliminating need for human interaction. Specified over temperature range of -40 to 125°C, potentiometers are suited for power supply trim and calibration, set-point and process control, closed-loop servo control, portable...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers