Microchip Technology Inc.
Chandler, AZ 85224
Share:
New PIC18 Microcontroller Family with an Array of Core Independent Peripherals
Configurable CIPs make it simple to create custom hardware-based functions for automotive and industrial designs with near-zero latency. Used to transmit and receive data through a controller area network flexible data-rate bus. Available peripherals include 32-bit cyclic redundancy check with scan, windowed watchdog timer and joint test action group.
Read More »
New Touchscreen Controller Family Leverages High Signal to Noise Ratio Design
MXT336UD-MAUHA1 enable system shut off through an intuitive soft button on a touchscreen. Allows machine to reliably detect and track multiple fingers on surfaces exposed to moisture, water, grease and more. Enable appliance to detect a touchscreen or appliance failure and shut down automatically.
Read More »
New CryptoAutomotive Security IC Available in 8 and 14-pin SOIC Packages
TA100 provides AUTOSAR compliant MCAL drivers that integrates into an AUTOSAR software stack. Supports in-vehicle network security solutions such as secure boot, firmware update and message authentication. Offers pre-programmed cryptographic internal application code provisioned with unique asymmetric key-pairs.
Read More »
New XpressConnect Retimers Support Passive Copper and Optical Cables
Delivers extended reach at >80% low latency than the PCIe specification, with a pin-to-pin latency of <10 nanoseconds. Offers low-latency signal transmission and include high-reliability features such as hot-plug and surprise-plug. Available in multiple lane count variants of up to 16 lanes of PCIe Gen 5 to connect to a wide range of PCIe and CXL devices.
Read More »
New RTG4 Field Programmable Gate Array is QML Class V Qualified
Features 150,000 Logic Elements (LEs), 462 multipliers and 5.2 megabits (Mb) of memory. Offers high-speed signal-processing capabilities and leverage reprogrammable flash memory. Comes with 352 pins for RTG4 FPGAs simplifies system design in applications ranging from satellites and space probes to planet landers and vehicles.
Read More »
Latest Schottky Barrier Diodes are AEC-Q101 Qualified
Meet automotive quality standards across a wide range of voltage, current and package options. Maximize system reliability and ruggedness and enable stable and lasting application life. Offer avalanche performance that allows designers to reduce the need for external protection circuits, reducing system cost and complexity.
Read More »
New LX7720 Motor Controller is MIL-PRF-38535 Class V and Class Q Qualified
Offers radiation tolerance to 100 krad Total Ionization Dose (TID) and 50 krad to Enhanced-Low-Dose-Rate-Sensitivity (ELDRS) exposure. Combines four half-bridge N-channel MOSFET drivers, four floating differential current sensors, and pulse modulated resolver transformer driver. Ideal for motor control applications in space robotics and human-rated space programs.
Read More »
Latest Microcontrollers from Microchip Come with Programming and Debugging Capabilities
Feature configurable Operational Amplifier (Op Amp) and Analog-to-Digital Converter (ADC) with computation and Digital-to-Analog Converters (DACs). Available in PIC18-Q41 and AVR DB models that are supported by MPLAB® X Integrated Development Environment (IDE). Suitable for IoT and large-scale artificial intelligence (AI) at-the-edge, including predictive maintenance edge nodes in a smart...
Read More »
New Wi-Fi Microcontroller Module Includes PIC32MZW1 Curiosity Board
WFI32E01PC improves radio frequency (RF) power and provides high level of security. Streamlines the process of network authentication using secure element technology. Designed for home automation devices, computing and consumer devices.
Read More »
Latest Motor Controls from Microchip are Ideal for Automotive, Industrial, Medical and Consumer Applications
dsPIC® DSCs are suitable for existing motor control development boards and also with cost-effective low-voltage motor control development board. 32-bit MCU devices offer 32-bit floating point and DSP performance with flexible communications options. Supported by design tools, development hardware, torque-maximizing algorithm and refrigerator compressor reference design.
Read More »
New PIC18 Microcontroller Family with an Array of Core Independent Peripherals
Configurable CIPs make it simple to create custom hardware-based functions for automotive and industrial designs with near-zero latency. Used to transmit and receive data through a controller area network flexible data-rate bus. Available peripherals include 32-bit cyclic redundancy check with scan, windowed watchdog timer and joint test action group.
Read More »
New Touchscreen Controller Family Leverages High Signal to Noise Ratio Design
MXT336UD-MAUHA1 enable system shut off through an intuitive soft button on a touchscreen. Allows machine to reliably detect and track multiple fingers on surfaces exposed to moisture, water, grease and more. Enable appliance to detect a touchscreen or appliance failure and shut down automatically.
Read More »
New CryptoAutomotive Security IC Available in 8 and 14-pin SOIC Packages
TA100 provides AUTOSAR compliant MCAL drivers that integrates into an AUTOSAR software stack. Supports in-vehicle network security solutions such as secure boot, firmware update and message authentication. Offers pre-programmed cryptographic internal application code provisioned with unique asymmetric key-pairs.
Read More »
New XpressConnect Retimers Support Passive Copper and Optical Cables
Delivers extended reach at >80% low latency than the PCIe specification, with a pin-to-pin latency of <10 nanoseconds. Offers low-latency signal transmission and include high-reliability features such as hot-plug and surprise-plug. Available in multiple lane count variants of up to 16 lanes of PCIe Gen 5 to connect to a wide range of PCIe and CXL devices.
Read More »
New RTG4 Field Programmable Gate Array is QML Class V Qualified
Features 150,000 Logic Elements (LEs), 462 multipliers and 5.2 megabits (Mb) of memory. Offers high-speed signal-processing capabilities and leverage reprogrammable flash memory. Comes with 352 pins for RTG4 FPGAs simplifies system design in applications ranging from satellites and space probes to planet landers and vehicles.
Read More »
Latest Schottky Barrier Diodes are AEC-Q101 Qualified
Meet automotive quality standards across a wide range of voltage, current and package options. Maximize system reliability and ruggedness and enable stable and lasting application life. Offer avalanche performance that allows designers to reduce the need for external protection circuits, reducing system cost and complexity.
Read More »
New LX7720 Motor Controller is MIL-PRF-38535 Class V and Class Q Qualified
Offers radiation tolerance to 100 krad Total Ionization Dose (TID) and 50 krad to Enhanced-Low-Dose-Rate-Sensitivity (ELDRS) exposure. Combines four half-bridge N-channel MOSFET drivers, four floating differential current sensors, and pulse modulated resolver transformer driver. Ideal for motor control applications in space robotics and human-rated space programs.
Read More »
Latest Microcontrollers from Microchip Come with Programming and Debugging Capabilities
Feature configurable Operational Amplifier (Op Amp) and Analog-to-Digital Converter (ADC) with computation and Digital-to-Analog Converters (DACs). Available in PIC18-Q41 and AVR DB models that are supported by MPLAB® X Integrated Development Environment (IDE). Suitable for IoT and large-scale artificial intelligence (AI) at-the-edge, including predictive maintenance edge nodes in a smart...
Read More »
New Wi-Fi Microcontroller Module Includes PIC32MZW1 Curiosity Board
WFI32E01PC improves radio frequency (RF) power and provides high level of security. Streamlines the process of network authentication using secure element technology. Designed for home automation devices, computing and consumer devices.
Read More »
Latest Motor Controls from Microchip are Ideal for Automotive, Industrial, Medical and Consumer Applications
dsPIC® DSCs are suitable for existing motor control development boards and also with cost-effective low-voltage motor control development board. 32-bit MCU devices offer 32-bit floating point and DSP performance with flexible communications options. Supported by design tools, development hardware, torque-maximizing algorithm and refrigerator compressor reference design.
Read More »
