Trust Automation, Inc.
Bldg. 100
San Luis Obispo, CA 93401
Linear Drive delivers -
Measuring 14.9 x 7.7 x 4.7 in., Model TA333 features true Class-AB linear amplifier with pure analog throughput at currents up to 25 A. Drive operates with brushless motors using external sinusoidal commutation, internally commutated brushless motors with Hall Effect sensor feedback, 2-phase stepper motors, or up to 2 voice coil motors. For applications requiring low electrical noise, drive...
Read More »Linear Servo Drive is rated 150 V, 900 W continuous.
Measuring 14.9 x 7.7 x 4.7 in., 3-phase Model TA330 is configured for 3-phase dc brushless servo motors using Hall Effect sensors, 3-phase ac brushless motors using external sinusoidal commutation, single-phase dc brushed servo motors in bridged mode, and brushless linear motors. Requiring 24 V input to power logic and bias supplies, unit produces very low electrical noise, making it suited for...
Read More »
Transmitters and Receivers work at distances to 1,000 ft.
Providing fiber-optic transmission of command signals and encoder feedback, TA821 Copper Reduction modules convert electrical encoder, hall sensor, and limit signals to optical signal and back into electrical signals. Products, mounted with motor and on linear stage, are available in 1-, 2-, and 4-axis units that operate on 5 Vdc and feature power-on status indicating LED. Modules measure 3.50 x...
Read More »
Linear Amplifier eliminates cogging and torque ripple.
Providing 700 W continuous and 1,400 W peak power, 3-phase servo amplifier, Model TA320 can be configured to accept 2 sinusoidal commutations separated by 120Ã-
Read More »
Brush/Brushless Servo Motors feature low torque ripple.
Series SE500 consists of 8 brushed servos from 23-500 W, while Series SE600 features 8 low inertia brushless servos from 30-1,500 W, and Series SE700 includes 12 medium inertia brushless servos from 50-7,000 W. Differential Hall signals U, V, and W are standard on SE600 and SE700 units. Torque ripple on these 10-pole servos is 0.3% of rated torque. Series SE500 features 1,000 line differential...
Read More »
Servo Amplifiers suit small/medium size brushless motors.
Linear 3-phase Models TA305 and TA310 provide 50 and 200 W continuous power, respectively. Dynamic Transconductance Selection enables on-the-fly changes to torque gain. Trapezoidal output minimizes cogging, and Hall transition-caused overshoots are minimized, providing smooth, sinusoidal-like drive mode. Fault protected from over-current and over-temperature, units operate with 15-52 V supply in...
Read More »
Linear Drive delivers -
Measuring 14.9 x 7.7 x 4.7 in., Model TA333 features true Class-AB linear amplifier with pure analog throughput at currents up to 25 A. Drive operates with brushless motors using external sinusoidal commutation, internally commutated brushless motors with Hall Effect sensor feedback, 2-phase stepper motors, or up to 2 voice coil motors. For applications requiring low electrical noise, drive...
Read More »Linear Servo Drive is rated 150 V, 900 W continuous.
Measuring 14.9 x 7.7 x 4.7 in., 3-phase Model TA330 is configured for 3-phase dc brushless servo motors using Hall Effect sensors, 3-phase ac brushless motors using external sinusoidal commutation, single-phase dc brushed servo motors in bridged mode, and brushless linear motors. Requiring 24 V input to power logic and bias supplies, unit produces very low electrical noise, making it suited for...
Read More »
Transmitters and Receivers work at distances to 1,000 ft.
Providing fiber-optic transmission of command signals and encoder feedback, TA821 Copper Reduction modules convert electrical encoder, hall sensor, and limit signals to optical signal and back into electrical signals. Products, mounted with motor and on linear stage, are available in 1-, 2-, and 4-axis units that operate on 5 Vdc and feature power-on status indicating LED. Modules measure 3.50 x...
Read More »
Linear Amplifier eliminates cogging and torque ripple.
Providing 700 W continuous and 1,400 W peak power, 3-phase servo amplifier, Model TA320 can be configured to accept 2 sinusoidal commutations separated by 120Ã-
Read More »
Brush/Brushless Servo Motors feature low torque ripple.
Series SE500 consists of 8 brushed servos from 23-500 W, while Series SE600 features 8 low inertia brushless servos from 30-1,500 W, and Series SE700 includes 12 medium inertia brushless servos from 50-7,000 W. Differential Hall signals U, V, and W are standard on SE600 and SE700 units. Torque ripple on these 10-pole servos is 0.3% of rated torque. Series SE500 features 1,000 line differential...
Read More »
Servo Amplifiers suit small/medium size brushless motors.
Linear 3-phase Models TA305 and TA310 provide 50 and 200 W continuous power, respectively. Dynamic Transconductance Selection enables on-the-fly changes to torque gain. Trapezoidal output minimizes cogging, and Hall transition-caused overshoots are minimized, providing smooth, sinusoidal-like drive mode. Fault protected from over-current and over-temperature, units operate with 15-52 V supply in...
Read More »