HydraForce, Inc.

Electronic Driver enhances hydraulic proportional valve control.
Agricultural & Farming Products

Electronic Driver enhances hydraulic proportional valve control.

OperatingÂ- over -40 to +185°F range from 8–32 Vdc supply, configurable ECDR-0506A can enhance control of hydraulic proportional valves. Features include 32-bit processor; 6 inputs (4 analog and 2 digital), and 5 outputs (4 closed loop and one open loop). While HF-Impulse software enables configuration, CAN 2.0B communication interface enables reading...

Read More »
Drop-In Cartridge Valves serve transmission, pilot control market.
Fluid & Gas Flow Equipment

Drop-In Cartridge Valves serve transmission, pilot control market.

Drawing minimal current while generatingÂ- maximum actuator force, G3 drop-in style cartridge valves feature coil reconfigured with electrical connector on top and create accelerated response for hydraulic applications. Styles include Model SV on/off solenoid valves, Model EHPR direct-acting proportional pressure reducing/relieving valves, and Model TS pilot-operated proportional pressure...

Read More »
Five Easy ways to Reduce Your Hydraulic Footprint
Fluid & Gas Flow Equipment

Five Easy ways to Reduce Your Hydraulic Footprint

Our multi-function valves incorporate two or more functions into a single cartridge valve. By combining functions, not only do we reduce the number of valves in your manifold -- we also reduce space claim, the number of ports, and costly cross drills, while increasing flow passage efficiency. 1. Improve Load-Sensing Efficiency Our patented SVCL and SPCL valves combine integral piloting and load...

Read More »
Hydraulic Cartridge Valves feature built-in position sensing.
Fluid & Gas Flow Equipment

Hydraulic Cartridge Valves feature built-in position sensing.

Available in sizes from 10-16, Smart Hydraulic Cartridge Valves with built-in sensing option are capable of transmitting On or Off signal for position-sensing in hydraulic systems. Sensing option consists of coupling tube with common solenoid valve on one side and hydraulic valve assembly on other. Coupling tube has elongated plunger with Hall Effect sensor element that monitors and transmits...

Read More »
Cartridge Valves support vehicle applications up to 5,000 psi.
Fluid & Gas Flow Equipment

Cartridge Valves support vehicle applications up to 5,000 psi.

Incorporating modified standard cavity with bottom shoulder to support valve cage, H-Series HyPerformance(TM) Valves offer continuous operating pressures to 350 bar and intermittent pressures to 420 bar. Single-piece PPDI urethane seals eliminate need for backup rings, while IP69K-rated solenoid coils support continuous operation at ±15% of rated voltage. Valves conform to NFPA's T2.6.1...

Read More »
Electronic Control Units do not require external cooling.
Agricultural & Farming Products

Electronic Control Units do not require external cooling.

Gray Matter ECUs are general-purpose programmable controllers designed to withstand real-world environmental demands of off-highway mobile applications. Used stand-alone or integrated into CAN network, products feature flexible I/O configuration protected against shorts and can drive up to 3.0 A per output pin. Operating from -40 to +70°C, ECUs come in fully sealed, cast-aluminum housing...

Read More »
HydraForce Integrates Valve Library into Automation Studio
Fluid & Gas Flow Equipment

HydraForce Integrates Valve Library into Automation Studio

HydraForce of Lincolnshire, IL (www.HydraForce.com), producer of the world's broadest range of high quality, cartridge valves has collaborated with Famic Technologies Inc. (www.FamicTech.com) of Saint Laurent, Quebec to incorporate their valve library into Famic's Automation Studio software. The HydraForce product-enhanced software will allow complete modeling of an integrated hydraulic circuit...

Read More »
HydraForce is Now Releasing i-Design Version 3, a FREE Hydraulic System Design Software
Software

HydraForce is Now Releasing i-Design Version 3, a FREE Hydraulic System Design Software

Overview: The updated HydraForce i-Design v3.0 circuit design tool is being released on July 7, 2009. The program includes the addition of 3D Modeling Capabilities as well as all new cartridge valve products and an update to the pricing library. In addition several user enhancements are included to greatly improve function and convenience. HydraForce is now releasing i-Design Version 3, a FREE...

Read More »
Fluid & Gas Flow Equipment

Solenoid Operated Valves offer load-signaling capability.

Designed for directional control and load-holding applications, SVCL and SPCL series valves offer operating pressure of 3,625 psi and holding pressure of 5,000 psi at port 1. They feature VC10-3 cavity with modified pre-drill and 5 drops per minute leakage. Rated flow for SVCL and SPCL is 15 gpm at 175 and 225 psi differential, respectively. SVCL valves use HydraForce D-Series and E-series coils...

Read More »
Electronic Driver enhances hydraulic proportional valve control.
Agricultural & Farming Products

Electronic Driver enhances hydraulic proportional valve control.

OperatingÂ- over -40 to +185°F range from 8–32 Vdc supply, configurable ECDR-0506A can enhance control of hydraulic proportional valves. Features include 32-bit processor; 6 inputs (4 analog and 2 digital), and 5 outputs (4 closed loop and one open loop). While HF-Impulse software enables configuration, CAN 2.0B communication interface enables reading...

Read More »
Company News

HydraForce Establishes LLC Corporation

HydraForce, the leading independent manufacturer of hydraulic cartridge valves, manifolds and electro-hydraulic controls, has established a new LLC corporation in India.Â-  “We’ve had a sales office in India for many years, but the establishment of this LLC corporation will solidify and grow our presence in India,” explained Mark Wilson, HydraForce Sales Director. HydraForce India LLC...

Read More »
Drop-In Cartridge Valves serve transmission, pilot control market.
Fluid & Gas Flow Equipment

Drop-In Cartridge Valves serve transmission, pilot control market.

Drawing minimal current while generatingÂ- maximum actuator force, G3 drop-in style cartridge valves feature coil reconfigured with electrical connector on top and create accelerated response for hydraulic applications. Styles include Model SV on/off solenoid valves, Model EHPR direct-acting proportional pressure reducing/relieving valves, and Model TS pilot-operated proportional pressure...

Read More »
Company News

HydraForce Moves to Advanced Manufacturing Hub in Birmingham, England

HydraForce, an international manufacturer of high performance electrohydraulic controls, has moved into a brand new, 11,150 sq. m. / 120,000 sq ft, purpose-built facility in the Advanced Manufacturing Hub at Aston Hall Road, Birmingham. “Our move is right on schedule with no interruption in production,” said Peter MacDonald, U.K. Managing Director. “We’d like to thank the Buckingham Group...

Read More »
Company News

HydraForce China Achieves ISO 9001:2008 Certification

CHANGZHOU, China - HydraForce Hydraulic Systems (Changzhou) Co. Ltd. has achieved ISO 9001:2008 certification for manufacturing hydraulic manifold systems, making it thethird HydraForce facility to be ISO 9001-certified. HydraForce plants in Lincolnshire, Illinois, U.S.A.and Birmingham, England, U.K. are already ISO-9001-certified. I am very pleased and proud to announce that our production...

Read More »
Company News

HydraForce China Achieves ISO 9001:2008 Certification

CHANGZHOU, China - HydraForce Hydraulic Systems (Changzhou) Co. Ltd. has achieved ISO 9001:2008 certification for manufacturing hydraulic manifold systems, making it the third HydraForce facility to be ISO 9001-certified. HydraForce plants in Lincolnshire, Illinois, U.S.A. and Birmingham, England, U.K. are already ISO-9001-certified. I am very pleased and proud to announce that our production...

Read More »
Five Easy ways to Reduce Your Hydraulic Footprint
Fluid & Gas Flow Equipment

Five Easy ways to Reduce Your Hydraulic Footprint

Our multi-function valves incorporate two or more functions into a single cartridge valve. By combining functions, not only do we reduce the number of valves in your manifold -- we also reduce space claim, the number of ports, and costly cross drills, while increasing flow passage efficiency. 1. Improve Load-Sensing Efficiency Our patented SVCL and SPCL valves combine integral piloting and load...

Read More »
Hydraulic Cartridge Valves feature built-in position sensing.
Fluid & Gas Flow Equipment

Hydraulic Cartridge Valves feature built-in position sensing.

Available in sizes from 10-16, Smart Hydraulic Cartridge Valves with built-in sensing option are capable of transmitting On or Off signal for position-sensing in hydraulic systems. Sensing option consists of coupling tube with common solenoid valve on one side and hydraulic valve assembly on other. Coupling tube has elongated plunger with Hall Effect sensor element that monitors and transmits...

Read More »
Company News

HydraForce is Pleased to Announce the June 2011 Opening of its New Operating Facility in Changzhou, China

The China location will serve as the company's operating base for Asia / Pacific markets and will include manifold manufacturing responsibility, assembly and test capabilities, combination valve design, as well as, customer service and sales support activities. The Changzhou location is the company's fourth global manufacturing location and will supplement services provided to the Americas...

Read More »

All Topics