RF Industries

Wireless Tranceiver meets FCC narrow band requirements.
Communication Systems & Equipment

Wireless Tranceiver meets FCC narrow band requirements.

NL6000 radio-modem operates at 12 Kbps on narrow band channels and 22 Kbps on wide band channels. Using digital technology, unit is configurable to operate wireless telemetry as well as mobile data. With IP address ability and USB port, connectivity to LANs is possible. Transmit power, adjustable from 1-6 W, allows mobile, fixed, and solar operations. Power requirements are from 11-16 Vdc. Unit...

Read More »
Cable Assemblies meet IEEE 802.11 standards.
Construction Equipment and Supplies

Cable Assemblies meet IEEE 802.11 standards.

MHF jumpers satisfy IEEE 802.11, Bluetooth(TM) and FCC Part 15 standards for wireless applications including WLAN, RF Test Points, and PDA devices. Jumpers use low profile connectors that occupy minimal board space while providing VSWR rating of 1.3 max. up to 6 GHz. Teflon® cables are used in RFW-10506-XX, MHF plug to MHF plug; RFW-10507-XX, MHF plug to pigtail; RFW-10508-XX, MHF plug to...

Read More »
Installation Tools suit wire and cable modifications.
Agricultural & Farming Products

Installation Tools suit wire and cable modifications.

Cutters, strippers, and crimpers are available for wire and cable and some have multiple functions. Cutters are designed for small wire and coax, and aluminum and copper cable from 2 AWG to 250 mmÂ-². Strippers are designed for wire from 30-10 AWG, coaxial cables up to .600 in. dia, multi-conductor cables, and CAT 5 & 6 wires and cables. Crimpers are designed for insulated and non-insulated...

Read More »
Coaxial Connectors satisfy FCC Part 15 interface requirements.
Construction Equipment and Supplies

Coaxial Connectors satisfy FCC Part 15 interface requirements.

RPL positive locking, sub-miniature connectors feature 50 ohm impedance and are used at frequencies from DC to 8 GHz in RF applications. At 6 GHz, they perform with VSWR of less than 1.2. All are made of nickel-plated, machined brass bodies, gold-plated contacts, and Teflon insulation. Quick-disconnect locking mechanism ensures that interconnect will not disengage during use. Minimum retention...

Read More »
Universal Adapters are offered separately or in kits.
Construction Equipment and Supplies

Universal Adapters are offered separately or in kits.

Unidapt® Line of male and female coaxial adapters are made of machined brass with Teflon® insulation, silver-plated bodies, and gold-plated contacts. RFA-4018 kit contains coaxial cable tester with Unidapt® terminals and full assortment of Unidapt® adapters. RFA-4018-20 Unidapt® cable tester is designed to test coaxial cables for shorts, open conductors, and open...

Read More »
Connector suits board-to-panel feed-through applications.
Construction Equipment and Supplies

Connector suits board-to-panel feed-through applications.

Model RFS-2030 is constructed of nickel plated machined brass with Teflon insulation and silver plated phosphor bronze contact. Bulkhead seal is inset GR70 nitrile O-ring. Connector is mounted using 4 posts with standoffs spaced .400 in. on center. Featuring voltage rating of 1,500 V peak and insulation resistance of 5 K milliohms max, RFS-2030 is designed for applications with frequency range of...

Read More »
Connectors/Cable Assemblies suit telecommunications hardware.
Construction Equipment and Supplies

Connectors/Cable Assemblies suit telecommunications hardware.

RFH Series Connectors are low profile MHF coaxial connectors with mounting area of 3 mm x 3 mm on PCB and 2 mm height when mated. Cable assemblies test frequency rating VSWR of 1.3 max up to 6 GHz. MHF connectors have nominal impedance of 50 ohms with dielectric withstanding voltage of 150 Vac rms and temperature range of -40 to +90°C. RFH-4910-1 right angle plug and RFH-4911 PCB mount MHF...

Read More »
Surge Protector shields small/medium output power radios.

Surge Protector shields small/medium output power radios.

Model RFS-2093, 50-ohm in-line surge protector with N female interfaces cab be used with frequencies from DC to 6 GHz. Its aluminum die-cast body offers gas tube arrestor and is compliant to IECC/IEEE standards. Gas tube arrestor offers DC break-down voltage of 90 V ±20%; shock-wave break-down voltage @ 5 KV/micro-second of 1 KV; and maximum shock-wave current of 5 KA @ 8/20 micro seconds....

Read More »
Snap-On Connectors rated for 500 Vrms, -65 to +165 deg C.
Construction Equipment and Supplies

Snap-On Connectors rated for 500 Vrms, -65 to +165 deg C.

Mini-SMB 75 ohm connectors deliver dc to 4 GHz speed for broadband wireless applications. Connectors comply with MIL-STD 348 and meet Mil-c39012 requirements. Series includes straight RSB-200-1-17 and right angle RSB-21-0-1-179, crimp plugs for RG-179/U cable, vertical and right angle PCB plugs and jacks, and straight RSB-220-1-179 and bulkhead RSB-221-1-179 crimp jacks for RG-179-U cable. All...

Read More »

All Topics