Texas Instruments
Dallas, TX 75243
Share:
Fully-Differential Amp drives ADCs up to 100 MHz.
Available in 16-pin QFN package, 1.9 GHz THS4509 leverages BiCom-III complementary bipolar silicon-germanium process, which integrates NPN and PNP bipolar transistors. Unit delivers input referred voltage noise of 2.0 nV/rtHz and 1% settling time of 2 ns with 2 V output step. Other features include large signal bandwidth of 1.5 GHz, small signal bandwidth of 1.9 GHz, slew rate of 6,600 V/Ã-µs...
Read More »Audio Power Amplifier provides clear audio in cell phones.
Filter-free stereo Class-D audio power amplifier, TPA2012D2, enables audio-rich features such as polyphonic ring-tones, MP3 music, streaming video with audio, and 3D surround-sound effects in cell phones. Dual-channel product has A-weighted noise floor of 27 Ã-µVRMS and offers 4 gain select options and independent channel shutdown. Offered in Pb-free ThinQFN or Wafer Chip Scale packages, amp...
Read More »
Integrated PoE Solution has 4 independent ports.
Model TPS2384 manages discovery, classification, and delivery of dc power source equipment to powered device. It enables seamless sharing of power and data over same Ethernet cable and simplifies design of IEEE 802.3af-compliant power source equipment. Supporting operation at -40 to +125Ã-ºC, power management IC offers 3 modes of operation: automatic, port-management, or manual. It detects...
Read More »
Equalizer enables 4 Gbps speed on 1 Gbps backplanes.
Housed in 48-pin QFN lead-free package, SN65LVCP40, 0-4 Gbps data buffer/signal conditioner enables upgrade of 1 Gbps systems to 4 Gbps without redesigning backplane. It provides 0, 3, 6, or 9 dB selectable output pre-emphasis on drivers and features 5 dB receiver equalization for ISI jitter cleaning. Unit combines one pair of 1:2 buffers with single pair of 2:1 serial multiplexers and...
Read More »Hermetic Pressure Transducer suits harsh environments.
Available with 4-20 mA or voltage outputs, dry hermetic transducer features environmentally sealed, stainless steel casing that protects non-drift ceramic, capacitive sensing element. Welded hermetic seal also provides vibration tolerance, rated at 20 g up to 1 kHz. With EMC protection to 100 V/m, device is accurate to 0.25 BFSL and has repeatability level of 0.1%. It operates in temperatures...
Read More »
Power Management IC supports Xilinx FPGAs.
Triple-channel, Model TPS75003 is designed for Xilinx's Spartan(TM)-II/IIE/3 series of field programmable gate arrays. It integrates 3 A DC-DC buck controllers with up to 95% efficiency to power Spartan core and I/O rails, and one 300 mA LDO regulator with ceramic output capacitor for powering Vccaux rail or other low-power system voltage. With input range of 2.2-6.5 V, unit features programmable...
Read More »MCU Family offers standby power consumption under 1 -µA.
With 1 Ã-µsec access to fully synchronized 16 MIPS active mode, MSP430F2xx series RISC microcontrollers suit security system and portable medical device applications. Features include integrated Ã-
Read More »Digital Signal Processor has 512 Kbytes of L2 memory.
With BDTImark2000(TM) benchmark score of 5,480 at 600 MHz, TMS320C6418 features Viterbi coprocessor and capacity for 2,400 16-bit or 4,800 8-bit million multiply accumulate cycles per second peak performance. Used for software radio and terrestrial and satellite broadcast applications, product includes 2 Multi-channel Buffered Serial Ports, 2 Audio Serial Ports, one 16-/32-bit microprocessor Host...
Read More »
DC/DC Converter provides more than 90% efficiency.
SWIFT(TM) TPS54010 step-down, continuous-output, 14 A converter features 2 peak 18 A FETs integrated onto single chip and provides 1% output voltage accuracy down to 0.9 V. Switching frequency is fixed over entire output current range, and can be adjusted up to 700 kHz. Synchronous unit features input range of 3-4 V, adjustable soft start, plus power good output and enable pin for sequencing....
Read More »Floating-Point DSP provides 1,500 MFLOPS.
Fabricated in 0.13 micron CMOS technology, TMS320C6711 digital signal processor (DSP) enables imaging systems to perform real-time manipulation of data. Unit, rated at 250 MHz, has 1.4 V core voltage and 3.3 V I/O voltage and provides 1,500 Million Floating-Point Operations per Second (MFLOPS). Able to perform up to 6 IEEE-compatible floating-point operations per cycle, DSP has 32 general-purpose...
Read More »