Texas Instruments
Dallas, TX 75243
Share:
Digital Signal Processor is based on C64x+ core.
Designed for telecom, wireless infrastructure, and video/imaging applications, Model TMS320C6454 is code compatible with TMS320C64x(TM) DSPs and achieves 8,000 MMAC. Featuring DDR2 external memory of 533 MHz, 1 GHz C6454 DSP also includes 1 MB L2 memory, gigabit ethernet MAC, and 66 MHz PCI interface. Packaged in 24 mm, 697-lead ball grid array, device facilitates code development through use of...
Read More »Digital Signal Controllers offer 60 MHz performance.
Series TMS320F280xx controllers feature 32-bit wide data path for performance and mixed 16/32 bit instruction set for improved code density. Devices provide complete control system capabilities from signal input through on-chip, 12-bit A/D converter, quadrature encoder pulse interfaces, and timer captures. Communication interfaces include CAN, I2C, UART, and SPI ports. Accuracy of 16 bits in 100...
Read More »Digital Signal Controllers feature 32-bit wide data path.
Suited for industrial control applications, DSP-based TMS320F280xx controllers feature mixed 16/32-bit instruction set and processor-intensive, sensorless vector control. Models TMS320F28015/16 offer 12 KB RAM and 32 KB Flash, while TMS320F2801-60/02-60 offer 12 KB RAM and 32 or 64 KB Flash, respectively. Each provides complete control system capabilities and 60 MHz performance. Depending on...
Read More »Texas Instruments Single-Chip Cell Phone Technology Will Make Multimedia Phones Affordable for Mass Market
New OMAP-Vox(TM) Single-Chip Platform Supports EDGE, Enables Software Reuse for Faster and More Cost-Effective Multimedia-Rich Feature Phone Development DALLAS and BEIJING, Nov. 8 /-- During a summit of wireless industry leaders held today in Beijing, China, Texas Instruments Incorporated (NYSE:TXN) (TI) announced a new OMAP-Vox(TM) single-chip solution to foster development of lower-cost...
Read More »
Temperature Sensor suits precision measurement applications.
Supplied in MSOP-8 package, TMP275 delivers Ã-
Read More »IEC-Compliant Microcontroller promotes automotive safety.
Symmetrical dual-core microcontroller (MCU), TMS570, is suited for use in braking, steering, and chassis control applications. It features dual ARMÃ-® Limited Cortex(TM) R4 cores and 2 MB on-chip Flash memory, which is protected by Error-Correcting Code (ECC) bit checking. While design enables failure detection and response times required by IEC 61508 SIL3 standard, directly implemented...
Read More »
Operational Amplifier exhibits low noise and distortion.
Supplied in 16-pin QFN package, 16-bit THS4520 fully-differential ADC driver offers rail-to-rail output and supports wideband, dc coupled, channel requirements in high-accuracy, 3.3-5 V DAQ systems through its independent output common-mode control. This feature provides control for output common mode over full range, independent from signal path design. With 600 MHz bandwidth, product offers low...
Read More »ZyXEL Communications Selects Texas Instruments Voice over IP Solutions for Next-Generation Access Devices and IP Phones
DALLAS (August 30, 2006) -- Texas Instruments Incorporated (TI) (NYSE:TXN) announced today that ZyXEL Communications Corp. (TSE:2391), the world's largest residential gateway provider, has chosen TI's Voice over Internet Protocol (VoIP) products for its voice-enabled DSL access devices, VoIP gateways and IP phones. TI's complete, integrated customer premises equipment (CPE) silicon and software...
Read More »Fixed Gain Audio Power Amps occupy 2.5 x 1.7 mm PCB area.
Supplied in 1.5 x 1.5 mm package, models TPA2032D1, TPA2033D1, and TPA2034D1 feature respective fixed gain amplification of 6, 9.5, and 12 dB. They offer typ common-mode rejection ratio of -69 dB and power supply rejection ratio of -73 dB at 217 Hz. Suited for wireless portable applications, these 88% efficient Class-D audio power amplifiers are capable of driving 2.75 W from 5 V power supply...
Read More »Operational Amplifier is used in single-supply applications.
With single-supply operation from 2.2-5.5 V, OPA365 operational amplifier utilizes zero-crossover, single-input stage architecture to achieve rail-to-rail performance. Features include distortion of 0.0006% THD+N, noise of 4.5 nV/rtHz, bandwidth of 50 MHz, and settling time of 300 ns to 0.01%. Delivering CMRR of 100 dB minimum and 120 dB typical over entire input range, product design makes it...
Read More »