California Eastern Laboratories
Santa Clara, CA 95054
Share:
CEL and LITEC Announce a Partnership
Santa Clara – November 20, 2019 – California Eastern Laboratories (CEL) and LITEC Corporation announce a partnership allowing CEL to exclusively promote and sell LITEC’s RF PIN diode products in the Americas, Israel and India. CEL has a 60+ year history of marketing RF components to those territories. LITEC PIN diodes have been designed into most of the commercial radio systems in Japan...
Read More »
THine Introduces MIPI CSI-2 4Gbps/lane SerDes Chipset
Provides Designers the ability to extend and aggregate images from Dual HD cameras for greater than 15 meters Enables new high-performance video capabilities for 3D visualization & recognition, autonomous cars, robotics, medical equipment, gaming, XR devices, etc. Tokyo, Japan (August 1, 2019), Santa Clara, CA (July 31, 2019) – THine®, the leader in high-speed serial interfaces and image...
Read More »
New Deep UltraViolet CEL LEDs Includes CL7001C3, CL7002C3 and CL7003C2 with Output Powers of 3mW, 10mW and 30mW Respectively
Consist of a cutting edge AlGaN chip in a high thermal conductive 3.5mm x 3.5mm ceramic package with a shielded transmittance glass lid. Provide high efficiency with long lifetimes and an emitting wavelength of 275nm. Applications include water treatment, sterilization of medical equipment and disinfection of heating, ventilation and air conditioning systems.
Read More »
New Detachable HD Camera is Suitable for Use in Severe Environments
The Detachable HD Camera uses MIPI CSI-2 interface that outputs V-by-One® HS video. The product offers high resolution, high frame rate and low latency for capturing and displaying image and offer cable-less connection for use in wearable applications. The camera is based on V-by-One® HS protocol that uses proprietary encoding scheme with clock data recovery based serializer/deserializer...
Read More »
New Camera Development Kit Enables the Camera Developers to Reduce Development Time
Camera Development Kit (CDK) consists of hardware, firmware and GUI-based tuning tool. Unit’s interactive software offers real-time camera image feedback. Kit supports noise reduction, defect correction, exposure control, focus control, white balance control and video compression functions. Unit is suitable for applications such as wearable cameras for XR (AR/VR/MR), surveillance cameras,...
Read More »
New Cortet™ Lighting Control Solution Enables Manufacturers to Sell Systems and Solutions, not just Lamps & Luminaires
Santa Clara, CA – May 2, 2017 Cortet™ by CEL announced today the availability of its new Cortet Lighting Control Solution (www.cortet.com) and its “Powered By Cortet” partnership program that enables lamp and luminaire OEMs to provide a full range of local and IoT connected control systems, integrated solutions and lighting accessories to their clients and customers. As a “Powered By...
Read More »
CEL CG2409 RF Switches are used as diversity switches.
Available in CG2409X3 and CG2409M2 models, CEL CG2409 RF Switches are suitable in WLAN, mobile communications, wireless security and digital TV applications. Having 0.05 to 6GHz frequency range, CG2409X3 offers 32dB to 28dB isolation range. With 0.05 to 3.8 GHz frequency range, CG2409M2 provides 35dB to 21dB isolation range. Operated on 1.8V to 5V control voltage, CG2409X3 and CG2409M2 models...
Read More »
pseudomorphic High Electron Mobility Transistor used in 24GHz sensors.
Used in Ku and Ka Band Satellite Receiver applications, pHEMTs offer reduced noise and higher gain. Available in CE3512K2, CE3514M4, CE3520K3 and CE3521M4 microwave components, pHEMTs are suitable for applications in Low Noise Block in DBS and downconverters in VSAT systems.
Read More »
RF Switches operate through 6GHz frequency range.
Suitable for test and measurement systems as well as Wi-Fi, ZigBee and Bluetooth routers, sensors, appliances, RF Switches are used to route high frequency signals through transmission paths. Operating over frequency ranges through 6GHz, units are available in single-pole-double-throw(1:2), single-pole-multiple-throw and double-pole-double-throw. Units provide flexibility to create matrices.
Read More »
THCV241-Q HD video interface is AEC-Q100 (Grade 2) compliant.
Suitable for zero latency video transmission, THCV241-Q HD video enables 50x increase in maximum transmission distance ranging from 30cm to 15m. Enabling OEMs to produce 360 degree HD video cameras, interface extends cable length to 15 m for uncompressed 1080p60 video. With Uncompressed real-time transmission via slip rings, device offers smaller circuit boards for more compact designs and...
Read More »
CEL and LITEC Announce a Partnership
Santa Clara – November 20, 2019 – California Eastern Laboratories (CEL) and LITEC Corporation announce a partnership allowing CEL to exclusively promote and sell LITEC’s RF PIN diode products in the Americas, Israel and India. CEL has a 60+ year history of marketing RF components to those territories. LITEC PIN diodes have been designed into most of the commercial radio systems in Japan...
Read More »
THine Introduces MIPI CSI-2 4Gbps/lane SerDes Chipset
Provides Designers the ability to extend and aggregate images from Dual HD cameras for greater than 15 meters Enables new high-performance video capabilities for 3D visualization & recognition, autonomous cars, robotics, medical equipment, gaming, XR devices, etc. Tokyo, Japan (August 1, 2019), Santa Clara, CA (July 31, 2019) – THine®, the leader in high-speed serial interfaces and image...
Read More »
New Deep UltraViolet CEL LEDs Includes CL7001C3, CL7002C3 and CL7003C2 with Output Powers of 3mW, 10mW and 30mW Respectively
Consist of a cutting edge AlGaN chip in a high thermal conductive 3.5mm x 3.5mm ceramic package with a shielded transmittance glass lid. Provide high efficiency with long lifetimes and an emitting wavelength of 275nm. Applications include water treatment, sterilization of medical equipment and disinfection of heating, ventilation and air conditioning systems.
Read More »
New Detachable HD Camera is Suitable for Use in Severe Environments
The Detachable HD Camera uses MIPI CSI-2 interface that outputs V-by-One® HS video. The product offers high resolution, high frame rate and low latency for capturing and displaying image and offer cable-less connection for use in wearable applications. The camera is based on V-by-One® HS protocol that uses proprietary encoding scheme with clock data recovery based serializer/deserializer...
Read More »CEL Now Offers THine ICs through its Distribution Channels
SANTA CLARA, CA (October 24, 2018) and TOKYO (October 25, 2018) THine Electronics, Inc. (Tokyo Stock Exchange/JASDAQ: 6769), a semiconductor company focusing on high speed serial interfaces and image signal processing, and California Eastern Laboratories, Inc. (“CEL”) the strategic sales and technical support partner of THine for Americas, today announced the availability of THine ICs through...
Read More »
New Camera Development Kit Enables the Camera Developers to Reduce Development Time
Camera Development Kit (CDK) consists of hardware, firmware and GUI-based tuning tool. Unit’s interactive software offers real-time camera image feedback. Kit supports noise reduction, defect correction, exposure control, focus control, white balance control and video compression functions. Unit is suitable for applications such as wearable cameras for XR (AR/VR/MR), surveillance cameras,...
Read More »
New Cortet™ Lighting Control Solution Enables Manufacturers to Sell Systems and Solutions, not just Lamps & Luminaires
Santa Clara, CA – May 2, 2017 Cortet™ by CEL announced today the availability of its new Cortet Lighting Control Solution (www.cortet.com) and its “Powered By Cortet” partnership program that enables lamp and luminaire OEMs to provide a full range of local and IoT connected control systems, integrated solutions and lighting accessories to their clients and customers. As a “Powered By...
Read More »
CEL CG2409 RF Switches are used as diversity switches.
Available in CG2409X3 and CG2409M2 models, CEL CG2409 RF Switches are suitable in WLAN, mobile communications, wireless security and digital TV applications. Having 0.05 to 6GHz frequency range, CG2409X3 offers 32dB to 28dB isolation range. With 0.05 to 3.8 GHz frequency range, CG2409M2 provides 35dB to 21dB isolation range. Operated on 1.8V to 5V control voltage, CG2409X3 and CG2409M2 models...
Read More »
pseudomorphic High Electron Mobility Transistor used in 24GHz sensors.
Used in Ku and Ka Band Satellite Receiver applications, pHEMTs offer reduced noise and higher gain. Available in CE3512K2, CE3514M4, CE3520K3 and CE3521M4 microwave components, pHEMTs are suitable for applications in Low Noise Block in DBS and downconverters in VSAT systems.
Read More »
RF Switches operate through 6GHz frequency range.
Suitable for test and measurement systems as well as Wi-Fi, ZigBee and Bluetooth routers, sensors, appliances, RF Switches are used to route high frequency signals through transmission paths. Operating over frequency ranges through 6GHz, units are available in single-pole-double-throw(1:2), single-pole-multiple-throw and double-pole-double-throw. Units provide flexibility to create matrices.
Read More »