Concrete Fastening Systems, Inc.

New CONFAST Double Expansion Anchor is Made from Zamac Alloy
Fasteners & Hardware

New CONFAST Double Expansion Anchor is Made from Zamac Alloy

CONFAST Double Expansion Anchor features two cones, one with threading and other without threading. Unit is used for anchoring into concrete, brick or block base material. The anchor comes with two spring steel bands that allow expansion of the anchor against concrete at two points. Anchor is resistant to rust and is offered in diameter of ¼, 5/16, 3/8, ½, 5/8, and ¾ in. and hole diameters of...

Read More »
Hot-Dipped Galvanized Anchor Bolts Now Available from Concrete Fastening Systems
Fasteners & Hardware

Hot-Dipped Galvanized Anchor Bolts Now Available from Concrete Fastening Systems

While the hot-hipped galvanized wedge anchor should never be installed into soft, hollow base materials, their hot-dipped galvanized coating is excellent for use in moist atmospheres Environments where more rust resistance is required than the standard zinc plated wedge anchors can provide need an application that uses this type of protective coating. Although it is important to keep in mind that...

Read More »
Confast RedHead Trubolt+ Wedge Anchor Heavy-Duty Fastener for Anchoring to Concrete Base Materials in Infrastructure Applications
Fasteners & Hardware

Confast RedHead Trubolt+ Wedge Anchor Heavy-Duty Fastener for Anchoring to Concrete Base Materials in Infrastructure Applications

The RedHead Trubolt+ wedge anchor is a heavy-duty fastener for anchoring to the numerous concrete base materials commonly found in infrastructures. It features a high strength steel body for dependable results. One of the most significant features of this versatile concrete fastener is that it is approved to meet all requirements for cracked and un-cracked concrete applications. The RedHead...

Read More »
CONFAST®316 Stainless Steel Wedge Anchors are suitable for static load applications.
Fasteners & Hardware

CONFAST®316 Stainless Steel Wedge Anchors are suitable for static load applications.

CONFAST®316 Stainless Steel Wedge Anchors come with an expansion clip, nut and washer. These units are offered in nine diameters ranging from ¼ in. to 1-1/2 in. and are suitable for solid concrete material. Products offer minimum embedment depth and the threads are national coarse. Anchors come in different lengths according to the diameter such as ¼ in. diameter comes with a length of 1-3/4...

Read More »
Concrete Fastening Systems, Inc. Announces the Availability of CONFAST® Drop-in Brand Anchors
Fasteners & Hardware

Concrete Fastening Systems, Inc. Announces the Availability of CONFAST® Drop-in Brand Anchors

This drop-in anchor is ideal for use in solid concrete, such as inserting threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads to solid concrete. They can be used in applications that require a flush mounted anchor, or when a bolt needs to be inserted and removed. It is essential to use the drop-in anchor only in solid concrete and never in brick or...

Read More »
New CONFAST Double Expansion Anchor is Made from Zamac Alloy
Fasteners & Hardware

New CONFAST Double Expansion Anchor is Made from Zamac Alloy

CONFAST Double Expansion Anchor features two cones, one with threading and other without threading. Unit is used for anchoring into concrete, brick or block base material. The anchor comes with two spring steel bands that allow expansion of the anchor against concrete at two points. Anchor is resistant to rust and is offered in diameter of ¼, 5/16, 3/8, ½, 5/8, and ¾ in. and hole diameters of...

Read More »
Company News

Tips on Attaching Sill Plates to Concrete Foundations

When building a new structure, it is critical to securely fasten items to the foundation or slab of concrete with the use of a sill plate. A sill plate, also known as a sole plate, is the bottom horizontal part of a wall or building to which the vertical studs will be attached. Most sill plates are made from lumber - usually measuring 2x4, 2x6, 2x8 or 2x10. Before Getting Started To ensure proper...

Read More »
Hot-Dipped Galvanized Anchor Bolts Now Available from Concrete Fastening Systems
Fasteners & Hardware

Hot-Dipped Galvanized Anchor Bolts Now Available from Concrete Fastening Systems

While the hot-hipped galvanized wedge anchor should never be installed into soft, hollow base materials, their hot-dipped galvanized coating is excellent for use in moist atmospheres Environments where more rust resistance is required than the standard zinc plated wedge anchors can provide need an application that uses this type of protective coating. Although it is important to keep in mind that...

Read More »
Confast RedHead Trubolt+ Wedge Anchor Heavy-Duty Fastener for Anchoring to Concrete Base Materials in Infrastructure Applications
Fasteners & Hardware

Confast RedHead Trubolt+ Wedge Anchor Heavy-Duty Fastener for Anchoring to Concrete Base Materials in Infrastructure Applications

The RedHead Trubolt+ wedge anchor is a heavy-duty fastener for anchoring to the numerous concrete base materials commonly found in infrastructures. It features a high strength steel body for dependable results. One of the most significant features of this versatile concrete fastener is that it is approved to meet all requirements for cracked and un-cracked concrete applications. The RedHead...

Read More »
CONFAST®316 Stainless Steel Wedge Anchors are suitable for static load applications.
Fasteners & Hardware

CONFAST®316 Stainless Steel Wedge Anchors are suitable for static load applications.

CONFAST®316 Stainless Steel Wedge Anchors come with an expansion clip, nut and washer. These units are offered in nine diameters ranging from ¼ in. to 1-1/2 in. and are suitable for solid concrete material. Products offer minimum embedment depth and the threads are national coarse. Anchors come in different lengths according to the diameter such as ¼ in. diameter comes with a length of 1-3/4...

Read More »
Concrete Fastening Systems, Inc. Announces the Availability of CONFAST® Drop-in Brand Anchors
Fasteners & Hardware

Concrete Fastening Systems, Inc. Announces the Availability of CONFAST® Drop-in Brand Anchors

This drop-in anchor is ideal for use in solid concrete, such as inserting threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads to solid concrete. They can be used in applications that require a flush mounted anchor, or when a bolt needs to be inserted and removed. It is essential to use the drop-in anchor only in solid concrete and never in brick or...

Read More »

All Topics