Mereco Technologies Group Companies, Inc.
West Warwick, RI 02893
Share:
Fiber Optic Adhesives provide optimized polishing surface.
Comprising 2-component epoxies with 86 Shore D hardness, Mereco 3500 Series produces hard, smooth, and clean- polishing surface for terminating single- and multi-mode fiber optic connectors and fiber optic bundle potting, encapsulating glass fibers in ferrules, and bonding to variety of substrates, including most metals, glass, plastic, and ceramic. Six formulations are available with varying...
Read More »
Fiber Optic Adhesives provide optimized polishing surface.
Comprising 2-component epoxies with 86 Shore D hardness, Mereco 3500 Series produces hard, smooth, and cleanÃ- polishing surface for terminating single- and multi-mode fiber optic connectors and fiber optic bundle potting, encapsulating glass fibers in ferrules, and bonding to variety of substrates, including most metals, glass, plastic, and ceramic. Six formulations are available with...
Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...
Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...
Read More »Adhesive/Sealant bonds and encapsulates.
MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is...
Read More »Adhesive/Sealant bonds and encapsulates.
MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is...
Read More »Adhesive/Sealant bonds most plastics.
MRC 04-1348 UV/Visible light curing adhesive/sealant is based on aliphatic urethane acrylate chemistry. It cures in 2 to 5 seconds with UV light to form bonds that are optically clear and resistant to yellowing, moisture, and some solvents. MRC 04-1348 is semi-thixotropic at 25 deg C, cures to 40 to 50 Shore D, and has operating temperature of -40 to 130 deg C. Transparent liquid is suitable for...
Read More »Adhesive/Sealant bonds most plastics.
MRC 04-1348 UV/Visible light curing adhesive/sealant is based on aliphatic urethane acrylate chemistry. It cures in 2 to 5 seconds with UV light to form bonds that are optically clear and resistant to yellowing, moisture, and some solvents. MRC 04-1348 is semi-thixotropic at 25 deg C, cures to 40 to 50 Shore D, and has operating temperature of -40 to 130 deg C. Transparent liquid is suitable for...
Read More »
Fiber Optic Adhesives provide optimized polishing surface.
Comprising 2-component epoxies with 86 Shore D hardness, Mereco 3500 Series produces hard, smooth, and clean- polishing surface for terminating single- and multi-mode fiber optic connectors and fiber optic bundle potting, encapsulating glass fibers in ferrules, and bonding to variety of substrates, including most metals, glass, plastic, and ceramic. Six formulations are available with varying...
Read More »
Fiber Optic Adhesives provide optimized polishing surface.
Comprising 2-component epoxies with 86 Shore D hardness, Mereco 3500 Series produces hard, smooth, and cleanÃ- polishing surface for terminating single- and multi-mode fiber optic connectors and fiber optic bundle potting, encapsulating glass fibers in ferrules, and bonding to variety of substrates, including most metals, glass, plastic, and ceramic. Six formulations are available with...
Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...
Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...
Read More »Adhesive/Sealant bonds and encapsulates.
MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is...
Read More »Adhesive/Sealant bonds and encapsulates.
MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is...
Read More »Adhesive/Sealant bonds most plastics.
MRC 04-1348 UV/Visible light curing adhesive/sealant is based on aliphatic urethane acrylate chemistry. It cures in 2 to 5 seconds with UV light to form bonds that are optically clear and resistant to yellowing, moisture, and some solvents. MRC 04-1348 is semi-thixotropic at 25 deg C, cures to 40 to 50 Shore D, and has operating temperature of -40 to 130 deg C. Transparent liquid is suitable for...
Read More »Adhesive/Sealant bonds most plastics.
MRC 04-1348 UV/Visible light curing adhesive/sealant is based on aliphatic urethane acrylate chemistry. It cures in 2 to 5 seconds with UV light to form bonds that are optically clear and resistant to yellowing, moisture, and some solvents. MRC 04-1348 is semi-thixotropic at 25 deg C, cures to 40 to 50 Shore D, and has operating temperature of -40 to 130 deg C. Transparent liquid is suitable for...
Read More »