ESAB - Welding & Cutting Products Equipment

AC/DC TIG/STICK Welding Systems offer full digital control.
Welding Equipment & Supplies

AC/DC TIG/STICK Welding Systems offer full digital control.

Portable, inverter-basedÂ- welding systems ET 220i (29.5 lb) and ET 301i (35.9 lb) offer full digital control of TIG and Stick welding arc. Both units automatically accept single- or 3-phase, 50 or 60 Hz, 208–230 Vac or 460 Vac primary power (±15%). When connected to single-phase power, units offer max TIG output range of 5–200 A. On 3-phase power, ET 220i provides top TIG output...

Read More »
Benchtop Welding Wire Feeder has heavy-duty design.
Communication Systems & Equipment

Benchtop Welding Wire Feeder has heavy-duty design.

Featuring separate digital displays for voltage, wire feed speed, and amperage, Warrior® Feed 404 HDÂ- pays out .030–3/32 in. wire at speeds from 50–800 ipm. Drive roll design, combining 2 lower gear-driven rollers with 2 upper idler/smooth pressure rollers, minimizes scrubbing of wire, and debris generation. Along with Short Circuit Termination...

Read More »
CC/CV Power Source provides up to 400 A at 60% duty cycle.
Electrical Equipment & Systems

CC/CV Power Source provides up to 400 A at 60% duty cycle.

Designed to accept 3-phase primary power from 220–460 V ±10%, 50/60 Hz, Warrior™ 400i MV has total output range of 5–400 A for welding .030–5/64 in. cored wire and solid wires. SCT Technology provides automatic burn-back function that, after every stop, leaves wire-end in perfect shape ready for next start. For Stick welding, operators can choose from 3 different modes that optimize...

Read More »
Plasma Cutting System features built-in process database.
Agricultural & Farming Products

Plasma Cutting System features built-in process database.

Designed for heavy-duty mechanized cutting, Smart Plasmarc™ 200 m2 System cuts broad range of material types and thicknesses using air, oxygen, or nitrogen gases. System delivers high productivity piercing and cutting in mild steel up to 1.25 in. thick, with capacity to edge start and sever materials up to 2 in. thick. Offering fully 100% duty cycle at 200 A, Smart Plasmarc™ 200Â- ...

Read More »
Auto-Darkening Welding Helmet reduces operator eye strain.
Safety & Security Equipment

Auto-Darkening Welding Helmet reduces operator eye strain.

With optical class of 1/1/1/1 according to EN 379, 18 oz Aristo® Tech HD optimizesÂ- weld clarity and weld pool definition to help operators achieve accurate results. Features such as X-TIG mode, which uses electromagnetic arc sensors, and grind mode, which is suited for grinding as well as plasma and oxy-fuel cutting, are complemented by digital lens technology...

Read More »
ESAB to Sponsor 2015 Nitto King of the Hammers
Adhesives & Sealants

ESAB to Sponsor 2015 Nitto King of the Hammers

Florence, SC – ESAB Welding Cutting Products is proud to be the official welding sponsor of the 2015 Nitto King of the Hammers, a grueling off-road race that combines high-speed desert racing and rock crawling in a 165-mile course set in Johnson Valley, CA.Â-  A full week of racing will start on Sunday, February 1, 2015 with more than 300 teams competing before more than 35,000 fans in...

Read More »
Construction Equipment and Supplies

MIG Welding Consumables Platform keeps contact tips cooler.

Extending consumable parts life, Velocity™ platform features contact tipsÂ- with shielding gas ports that keep tip 30% cooler. Gas porting in contact tip, coupled with all-copper conductive path with fewer connections, promotes electrical and thermal conductivity, while running temperature of contact tip reduces ability for spatter to stick. Thread-less, drop-in contact tips can be...

Read More »
Power Source supports multiple welding processes.
Electrical Equipment & Systems

Power Source supports multiple welding processes.

Featuring inverter-based design, Aristo® Mig 4004i Pulse with Aristo Feed 3004 or Aristo Feed 4804 wire feeder is used for MIG, pulsed MIG, MAG, MMA, or TIG welding. Electronically controlled power source delivers welding current of 300 A and voltage of 32 V at 100% duty cycle. At 60% duty cycle, figures rise to 400 A and 36 V. Operating from 380–460 V (±10%), 3-phase supply at...

Read More »
Flux-Cored Wires enable welding in all positions.
Welding Equipment & Supplies

Flux-Cored Wires enable welding in all positions.

Designed for welding low-alloy, high-strength steels such as 4130, Dual Shield II 4130 SR is suited for offshore oil and gas topsides requiring corrosion resistance. Dual Shield II 70-Ni1 H4, designed for use under 75% Ar/25% CO2 gas protection, provides low-temperature toughness in as-welded and stress-relieved conditions. Wire produces diffusible hydrogen levels lower than 4 ml/100 g and...

Read More »
ESAB to Be Featured on Two Guys Garage
Agricultural & Farming Products

ESAB to Be Featured on Two Guys Garage

Florence, SC - ESAB Welding Cutting Products will be featured on the popular automotive aftermarket program, MAVTV's Two Guys Garage starring Kevin Byrd and Willie B. premiering on Friday, October 24, 2014 at 2 p.m. and 5 p.m. EDT. The episode will showcase ESAB's sponsorship of LetzRoll Offroad Racing, specialists in extreme offroad racing and fabrication, and customization of the new...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers