Sterling Instrument
New Hyde Park, NY 11042-5416
Share:
Right Angle Helical Gear Drives offer left or right hand rotation.
Hollow-shaft right-angle helical gear drives in S991HY-... Series feature aluminum alloy, hard-anodized case; built-in keyways; and heavy-duty sealed ball bearings. They also include 1144 steel, hollow bore shafts, ranging in size from 5/8-Ã-¾ in., as well as 4140 heat-treated steel gears. Operating in temperatures up to 200Ã-
Read More »
Aluminum-Acetal Gears feature integral fastening system.
Designed to mate with hubs that accept shaft sizes from .0900-.2498 in., S1268Z-...M Series combines noise reduction benefits of acetal rim gear teeth with strength of 2024 aluminum core assembled onto stainless steel hub. Units feature 20Ã-
Read More »
Timing Belt Pulleys feature integral hub fastening design.
Made of clear anodized aluminum alloy, 3mm Pitch HTDÃ-® Series A 6D23 (inch) and Series A 6D23M (metric) are available in 10-44 grooves with bore sizes from .125-.250 in. and 3-6 mm. Outer diameters range from .346-1.624 in. and 8.8-41.4 mm. FairlocÃ-® integral hub fastening design eliminates need for separate hub clamp devices and offers benefits of frequent position adjustment, while...
Read More »
Flange Mounted Pressbearings are self-aligning to -
Oil-impregnated, sintered bronze A 7Z42 Series comes in 5 sizes with bearing ID from .188-.501 in. Max heights vary from .425-.670 in, and max radial loads range from 140-600 lb. Max speed runs from 5,100-13,500 rpm, and operating temperature is -20 to +200Ã-
Read More »Flexible Helical Couplings feature zero backlash.
Flexible helical couplings in S50HAWM (metric) and S50HAA- (inch) Series have one-piece Anodized Aluminum construction with set screw type or integral clamp split-hub type designs for fastening to both shafts. Able to adapt to high- and low-speed applications, fatigue-resistant products fit shafts diameters from 3-12 mm and 3/32-1 Ã-½ in. Angular misalignment compensation is 5Ã-
Read More »Shaft Collars feature integral hub fastener.
Equipped with built-in bearing shim spacer, Series S25FB9 and S25FY9 consist of brass and 303 stainless steel shaft collars, respectively, with ODs from .433-1.496 in. diameter. Units are designed to fit shafts ranging from .12-Ã-¾ in. diameter. Integral FairlocÃ-® hub fastener eliminates marred shafts, adds positive metal-to-metal fastening strength along both hub sections, and permits...
Read More »Spur Gears are produced to ISO Class 7 specs.
Series S1VS05M, S1VS08M, and S1VS10M are 0.5, 0.8, and 1 Module 303 stainless steel spur gears with 20Ã-
Read More »Hydro-Dynamic Pressure Bearings offer quiet operation.
Suited for light application use, S99HDPM Series is formed by stacking petal-shaped, laminated Aluminum-Silicon alloy plates housed in Stainless Steel case with polyurea-thickened grease containing antioxidant and anticorrosion additives. When shaft rotates, fluid between shaft guide and shaft generates pressure because of squeeze effect. Series include 7 bearings with IDs from 1-6 mm and max...
Read More »Spur Gears are made to ISO Class 7 specifications.
Manufactured of 303 stainless steel or 2024 anodized aluminum, S10T05M Series is comprised of 300 precision Module 0.5 spur gears. They are available with 3 and 5 mm face widths and designed to fit shafts that measure 3, 5, or 8 mm in diameter. Stocked in diameter sizes from 11-100 mm, these 20Ã-
Read More »Couplings feature torsional vibration isolation.
Available in 64 Inch and 64 Metric, Neo-Flex Couplings feature shaft-to-shaft insulation, 73 durometer molded Neoprene center, and 303 stainless steel hubs. Conventional pin type hubs use set screw for fastening, while FairlocÃ-® integral hub fastener eliminates marred shafts and permits frequent phase adjustment, timing, and position adjustment. Offered with ribbed or smooth center sections,...
Read More »
Right Angle Helical Gear Drives offer left or right hand rotation.
Hollow-shaft right-angle helical gear drives in S991HY-... Series feature aluminum alloy, hard-anodized case; built-in keyways; and heavy-duty sealed ball bearings. They also include 1144 steel, hollow bore shafts, ranging in size from 5/8-Ã-¾ in., as well as 4140 heat-treated steel gears. Operating in temperatures up to 200Ã-
Read More »New Catalog From SDP/SI Features Fairloc The Integral Rotating Component Fastening System
New Hyde Park, NY -- Fastening rotating components to shafts has become easier with the publication of a new 96-page catalog Handbook of FairlocÃ-® Components, The Integral Fastener, D243 by Sterling Instrument and Stock Drive Products (ISO 9001 registered). FairlocÃ-® is designed to solve phasing, timing, positioning and frequent removal problems which conventional fastening methods,...
Read More »
Aluminum-Acetal Gears feature integral fastening system.
Designed to mate with hubs that accept shaft sizes from .0900-.2498 in., S1268Z-...M Series combines noise reduction benefits of acetal rim gear teeth with strength of 2024 aluminum core assembled onto stainless steel hub. Units feature 20Ã-
Read More »
Timing Belt Pulleys feature integral hub fastening design.
Made of clear anodized aluminum alloy, 3mm Pitch HTDÃ-® Series A 6D23 (inch) and Series A 6D23M (metric) are available in 10-44 grooves with bore sizes from .125-.250 in. and 3-6 mm. Outer diameters range from .346-1.624 in. and 8.8-41.4 mm. FairlocÃ-® integral hub fastening design eliminates need for separate hub clamp devices and offers benefits of frequent position adjustment, while...
Read More »
Flange Mounted Pressbearings are self-aligning to -
Oil-impregnated, sintered bronze A 7Z42 Series comes in 5 sizes with bearing ID from .188-.501 in. Max heights vary from .425-.670 in, and max radial loads range from 140-600 lb. Max speed runs from 5,100-13,500 rpm, and operating temperature is -20 to +200Ã-
Read More »Flexible Helical Couplings feature zero backlash.
Flexible helical couplings in S50HAWM (metric) and S50HAA- (inch) Series have one-piece Anodized Aluminum construction with set screw type or integral clamp split-hub type designs for fastening to both shafts. Able to adapt to high- and low-speed applications, fatigue-resistant products fit shafts diameters from 3-12 mm and 3/32-1 Ã-½ in. Angular misalignment compensation is 5Ã-
Read More »Shaft Collars feature integral hub fastener.
Equipped with built-in bearing shim spacer, Series S25FB9 and S25FY9 consist of brass and 303 stainless steel shaft collars, respectively, with ODs from .433-1.496 in. diameter. Units are designed to fit shafts ranging from .12-Ã-¾ in. diameter. Integral FairlocÃ-® hub fastener eliminates marred shafts, adds positive metal-to-metal fastening strength along both hub sections, and permits...
Read More »Spur Gears are produced to ISO Class 7 specs.
Series S1VS05M, S1VS08M, and S1VS10M are 0.5, 0.8, and 1 Module 303 stainless steel spur gears with 20Ã-
Read More »Hydro-Dynamic Pressure Bearings offer quiet operation.
Suited for light application use, S99HDPM Series is formed by stacking petal-shaped, laminated Aluminum-Silicon alloy plates housed in Stainless Steel case with polyurea-thickened grease containing antioxidant and anticorrosion additives. When shaft rotates, fluid between shaft guide and shaft generates pressure because of squeeze effect. Series include 7 bearings with IDs from 1-6 mm and max...
Read More »Spur Gears are made to ISO Class 7 specifications.
Manufactured of 303 stainless steel or 2024 anodized aluminum, S10T05M Series is comprised of 300 precision Module 0.5 spur gears. They are available with 3 and 5 mm face widths and designed to fit shafts that measure 3, 5, or 8 mm in diameter. Stocked in diameter sizes from 11-100 mm, these 20Ã-
Read More »