Universal Instruments Corp.
Binghamton, NY 13902-0825
Share:
Mack Technologies Chooses Universal Instruments' Fuzion Platform
Award-winning EMS company adds capacity and doubles utilization while also enhancing technical capabilities and operational flexibility. Mack Technologies, a leading provider of contract electronic manufacturing solutions, has chosen Universal Instruments’ FuzionÃ-® Platform solutions to boost efficiency for its high-mix product requirements and increasing volume demands. The company has...
Read More »
Surface Mount Platforms are optimized for capacity, utilization.
Intended for electronics manufacturers, FuzionXC2-37 and FuzionXC2-60Ã- leverage NPI software tools featuring icon-driven interface and efficiency tools, including on-line component auto-teach and on-the-fly production editing. FuzionXC2-37 accommodates boards up to 1,300 x 610 mm; 272, 8 mm feeder inputs, and range of input types: strip, tape, tube, odd-form, and tray. FuzionXC2-60 offers...
Read More »Universal Highlights New Platform and Emerging Market Focus at APEX 2012
Universal Instruments sets a higher standard for versatility and performance in a multifunction surface mount platform with the introduction of the Genesis GX-37D to the Americas market at the APEX 2012 tradeshow in San Diego, CA, February 28 - March 1. Universal will demonstrate the exceptional capabilities of the GX-37D on booth #2737, as well as share the company's vision into the exciting new...
Read More »SMT Hautes Boosts Productivity with Universal's Genesis Series 2
SMT Hautes Technologies, a leading-edge EMS provider, has purchased Universal Instruments' Genesis Series 2 Platforms to comprise a flexible production line at their Montreal, Canada facility. The new Series 2 line is achieving a 20% greater throughput than the company's previous surface mount lines, while also enabling SMT Hautes to perform advanced processes on the same line. Genesis Series 2...
Read More »
Universal Bolsters Complete Solutions Portfolio at APEX 2011
Universal Instruments offers complete process, manufacturing and support solutions for a full range of electronics assembly applications. Universal will highlight two new additions to its complete solutions portfolio on booth #1635 at the 2011 IPC APEX show located at Mandalay Bay, Las Vegas, April 12-14. The Advantis 3(TM) Platform brings scalable performance and class-leading technology for...
Read More »
Creation Leverages Universal's Advantis 3 Platform for Significant throughput Gains
Creation Technologies, a Global Top-50 and North American Top-10 Electronics Manufacturing Services (EMS) provider, has purchased Universal Instruments' Advantis 3(TM) Platform to improve productivity at their Markham Ontario, Canada Facility. The initial machine installation has resulted in greater than 25% throughput improvements. Advantis 3 delivers scalable performance and class-leading...
Read More »
Surface Mount Placement System handles boards up to 1,016 mm.
Powered by VRM linear motor with closed-loop 1 Ã-µm positioning, Genesis Series 2 is available 1-, 2-, and 4-beam configurations with throughputs up to 140,000 cph. Unit features 30-spindle LightningÃ-® head, which places passives down to 01005, CSPs, WSPs, Ã-µBGAs, eCAPs, DPAKs, and MELFs at full speed. Vertical part sensor verifies part presence immediately prior to placement, while...
Read More »
Direct Die Feeders install on GenesisSC Platform.
Innova and Innova + direct die feeders are portable, high-speed units that enable GenesisSC system to assemble complete module on single machine. Multiple feeders can be installed on single placement machine with minimum feeder slot consumption and feeders can alternate operation for continuous running of like part numbers. Units process wafers up to 300 mm in size and include vision processing,...
Read More »
Reporting Software identifies production inefficiencies.
Designed to increase utilization rates to over 90%, Linechart(TM) multi-vendor reporting software provides complete visibility into all production lines and identifies factory inefficiencies. It helps maximize utilization by monitoring production lines and providing graphical feedback for several KPIs across Universal and non-Universal pick-and-place equipment. By displaying data down to feeder...
Read More »
Electric Tape Feeders offer continuous splice capability.
Supporting requirements of high-speed chip placement, 0201-capable 8 mm Gold dual-lane feeders offer PSV reel detection sensor that enhances traceability for absolute line control. Single lane Black 8 mm and 12 mm electric feeders, designed for medium to low-volume midrange applications, ensure traceability with unique feeder ID. All feeders are compatible with Lightning rotary-motion...
Read More »
Mack Technologies Chooses Universal Instruments' Fuzion Platform
Award-winning EMS company adds capacity and doubles utilization while also enhancing technical capabilities and operational flexibility. Mack Technologies, a leading provider of contract electronic manufacturing solutions, has chosen Universal Instruments’ FuzionÃ-® Platform solutions to boost efficiency for its high-mix product requirements and increasing volume demands. The company has...
Read More »
Surface Mount Platforms are optimized for capacity, utilization.
Intended for electronics manufacturers, FuzionXC2-37 and FuzionXC2-60Ã- leverage NPI software tools featuring icon-driven interface and efficiency tools, including on-line component auto-teach and on-the-fly production editing. FuzionXC2-37 accommodates boards up to 1,300 x 610 mm; 272, 8 mm feeder inputs, and range of input types: strip, tape, tube, odd-form, and tray. FuzionXC2-60 offers...
Read More »Universal Improves Spare Parts Website, Hires General Manager of Production Tooling
In its ongoing effort to provide customers with exceptional service, Universal Instruments Corporation recently launched an enhanced spare parts website at www.uic-tooling.com. The development of the site is just one of the projects spearheaded by Justin Poet, general manager of the organization's newly created Production Tooling Group. Designed to improve the customer's experience,...
Read More »Universal Highlights New Platform and Emerging Market Focus at APEX 2012
Universal Instruments sets a higher standard for versatility and performance in a multifunction surface mount platform with the introduction of the Genesis GX-37D to the Americas market at the APEX 2012 tradeshow in San Diego, CA, February 28 - March 1. Universal will demonstrate the exceptional capabilities of the GX-37D on booth #2737, as well as share the company's vision into the exciting new...
Read More »SMT Hautes Boosts Productivity with Universal's Genesis Series 2
SMT Hautes Technologies, a leading-edge EMS provider, has purchased Universal Instruments' Genesis Series 2 Platforms to comprise a flexible production line at their Montreal, Canada facility. The new Series 2 line is achieving a 20% greater throughput than the company's previous surface mount lines, while also enabling SMT Hautes to perform advanced processes on the same line. Genesis Series 2...
Read More »
Universal Bolsters Complete Solutions Portfolio at APEX 2011
Universal Instruments offers complete process, manufacturing and support solutions for a full range of electronics assembly applications. Universal will highlight two new additions to its complete solutions portfolio on booth #1635 at the 2011 IPC APEX show located at Mandalay Bay, Las Vegas, April 12-14. The Advantis 3(TM) Platform brings scalable performance and class-leading technology for...
Read More »
Creation Leverages Universal's Advantis 3 Platform for Significant throughput Gains
Creation Technologies, a Global Top-50 and North American Top-10 Electronics Manufacturing Services (EMS) provider, has purchased Universal Instruments' Advantis 3(TM) Platform to improve productivity at their Markham Ontario, Canada Facility. The initial machine installation has resulted in greater than 25% throughput improvements. Advantis 3 delivers scalable performance and class-leading...
Read More »
Surface Mount Placement System handles boards up to 1,016 mm.
Powered by VRM linear motor with closed-loop 1 Ã-µm positioning, Genesis Series 2 is available 1-, 2-, and 4-beam configurations with throughputs up to 140,000 cph. Unit features 30-spindle LightningÃ-® head, which places passives down to 01005, CSPs, WSPs, Ã-µBGAs, eCAPs, DPAKs, and MELFs at full speed. Vertical part sensor verifies part presence immediately prior to placement, while...
Read More »
Direct Die Feeders install on GenesisSC Platform.
Innova and Innova + direct die feeders are portable, high-speed units that enable GenesisSC system to assemble complete module on single machine. Multiple feeders can be installed on single placement machine with minimum feeder slot consumption and feeders can alternate operation for continuous running of like part numbers. Units process wafers up to 300 mm in size and include vision processing,...
Read More »CBA Group Appoints Debbora Ahlgren Vice President of Marketing
The CBA Group, comprised of Universal Instruments Corporation and Hover-Davis, announces the appointment of Debbora (Deb) Ahlgren as Vice President of Marketing, reporting to Jean-Luc Pelissier, CEO and President of CBA, Universal Instruments and Hover-Davis. In this new role, Ms. Ahlgren takes responsibility for driving the global strategy for market positioning and leveraging of Universal's...
Read More »