AVO Training Institute
Dallas, TX 75237
Share:
Megger Innovates at PowerTest
Dallas, TX, February 25, 2009 - In Booth 413 at the 2009 PowerTest Electrical Maintenance and Safety Conference, which is being held March 9-12 at the Grand Hyatt, San Antonio, Texas, Megger is showcasing a greatly extended range of test equipment for use with power transformers as well as circuit breaker analyzers, battery load units and the latest version of its versatile MPRT protection relay...
Read More »
High-Current Loop Testers are designed for safety.
Able to be used on every part of industrial installations, LT300 carries CAT IV, 300 V rating as defined by IEC 61010-1. Its 3-phase safe design protects instrument against damage and user against potential injury if attempt is accidentally made to carry out tests on live circuit. Suitable for single-phase and phase-to-phase testing, product uses test current of 30 mA and offers choice of 2 loop...
Read More »
Insulation and Continuity Testers have CATIII 600 V rating.
MIT200 Series insulation and continuity testers offer live circuit protection, fit easily into pocket, and are tough enough to withstand demanding industrial applications. MIT220 model offers insulation testing at 250 and 500 V, while MIT230 allows testing at 250, 500, and 1,000 V. Both feature 1,000 MW insulation testing at all supported voltages, 200 mA continuity test current and fast-response...
Read More »
Insulation Testers offer 5 and 10 kV output.
Model S1-552 comes with 5 preprogrammed test voltages including 250, 500, 1,000, 2,500 and 5,000 V, can step up voltage in 10 V increments from 50-1,000 V and in 25 V increments beyond 1,000 V. It includes automatic polarization index, step voltage, dielectric discharge, and dielectric absorption ratio tests. With all capability and features of Model S1-552, Models S1-554 and S1-1054 offer 4 mA...
Read More »
Analog/Digital Testers feature intelligent safety systems.
Insulation/Continuity Testers, Series MIT300, provides live voltage warnings, safety lockouts, continuity checks, safe contact detectors, and safety interlocks to protect user. There are no buried functions and user guide in lid provides all basic information. Both display and range selected can be read during day or at night. Featuring rubber armor, testers are weather-proof to IP54 and meet or...
Read More »Reflectometer tests LAN fiber networks.
Dual wavelength, Model XC-8513 OTDR provides simplex or duplex multimode testing, and can measure both fibers of duplex cable with one connection. Both fiber traces can be overlayed for comparison on instrument's display. Device determines cause and location of loss of fiber segment including fiber, connectors at each end, plus length of segment, with distance resolution of 0.5 m. It is suited...
Read More »Moisture Detector utilizes coulometric titrimetry.
Portable, ac mains-powered, KF-LAB Test Set detects moisture content of insulating oils, primarily within oil-filled transformers and switchgear. Default setting mode is arranged to give correct settings to test moisture content of insulating oils with specific gravity of 0.875. Unit also analyzes other substances with specific gravities between 0.6-1.4. Detection of moisture content helps...
Read More »Relay Test Set simplifies complex testing.
Model MRPT performs manual and semi-automatic relay testing without error. It has built-in test routines, touch-screen interface, and built-in transducer testing capabilities. Results are displayed in calculated values such as watts, vars, power factor, and ohms. Metered outputs are displayed simultaneously to 0.05% range for real-time verification purposes. With constant power output of 200 Va...
Read More »Single-Phase TTR Tester offers single-handed operation.
Hand-Held Model TTR100 measures turns ratio, excitation current, phase displacement, dc resistance, and polarity of windings in single- and 3-phase distribution transformers, potential and current transformers, and tapped transformers. Featuring built-in data storage and downloading capabilites, unit can measure 20,000:1 turns ratio with accuracy of 0.1%. Deviations in measurements indicate...
Read More »Analyzer helps solve power quantity and quality problems.
Portable PA-9Plus trends flicker measurements PST/PLT while continuing to record events, RMS voltage/current trending, power, energy, waveforms, and harmonics. It records power quality and flow information simultaneously, which is viewed via backlit LCD graphics display and can be downloaded to computer via serial interface or removable Flash Memory Module. Unit uses Phase Lock Loop technology...
Read More »Megger Innovates at PowerTest
Dallas, TX, February 25, 2009 - In Booth 413 at the 2009 PowerTest Electrical Maintenance and Safety Conference, which is being held March 9-12 at the Grand Hyatt, San Antonio, Texas, Megger is showcasing a greatly extended range of test equipment for use with power transformers as well as circuit breaker analyzers, battery load units and the latest version of its versatile MPRT protection relay...
Read More »
High-Current Loop Testers are designed for safety.
Able to be used on every part of industrial installations, LT300 carries CAT IV, 300 V rating as defined by IEC 61010-1. Its 3-phase safe design protects instrument against damage and user against potential injury if attempt is accidentally made to carry out tests on live circuit. Suitable for single-phase and phase-to-phase testing, product uses test current of 30 mA and offers choice of 2 loop...
Read More »
Insulation and Continuity Testers have CATIII 600 V rating.
MIT200 Series insulation and continuity testers offer live circuit protection, fit easily into pocket, and are tough enough to withstand demanding industrial applications. MIT220 model offers insulation testing at 250 and 500 V, while MIT230 allows testing at 250, 500, and 1,000 V. Both feature 1,000 MW insulation testing at all supported voltages, 200 mA continuity test current and fast-response...
Read More »Pax Joins Megger Group to Expand Transformer Test Product Line
Dalls, TX - Megger Group has announced that it is to acquire Pax Diagnostics of Sweden. Pax transformer testing and insulation diagnostics products will be a strong addition to the Megger range of test instruments for the power industry. The Pax IDAX range of Dielectric Frequency Response Analyzers are designed for measuring moisture in power transformers as well as testing insulation material in...
Read More »Protective Relay Testing Explained and NETA Credited
Seminars presented by Megger that offer practical and comprehensive training on the most critical and important aspects of protective relay testing can now qualify for NETA Continuing Technical Development (CTD) credits. Both the Megger Relay Seminar Basic and Advanced courses are now eligible for 16 CTD credits in Category 11, Electrical Protective Devices and Relays. NETA's Continuing Technical...
Read More »Megger's Substation Seminars are Recognized by NETA
Megger's recent seminars in the latest developments for testing in substations have now been recognized to qualify for NETA Continuing Technical Development (CTD) credits. The two-day seminars have been added to NETA's commercial course list and NETA Certified Level III & IV Technicians can attend the courses for 16 credits in Category 13, General. NETA comments: NETA's Continuing Technical...
Read More »
Insulation Testers offer 5 and 10 kV output.
Model S1-552 comes with 5 preprogrammed test voltages including 250, 500, 1,000, 2,500 and 5,000 V, can step up voltage in 10 V increments from 50-1,000 V and in 25 V increments beyond 1,000 V. It includes automatic polarization index, step voltage, dielectric discharge, and dielectric absorption ratio tests. With all capability and features of Model S1-552, Models S1-554 and S1-1054 offer 4 mA...
Read More »
Analog/Digital Testers feature intelligent safety systems.
Insulation/Continuity Testers, Series MIT300, provides live voltage warnings, safety lockouts, continuity checks, safe contact detectors, and safety interlocks to protect user. There are no buried functions and user guide in lid provides all basic information. Both display and range selected can be read during day or at night. Featuring rubber armor, testers are weather-proof to IP54 and meet or...
Read More »Reflectometer tests LAN fiber networks.
Dual wavelength, Model XC-8513 OTDR provides simplex or duplex multimode testing, and can measure both fibers of duplex cable with one connection. Both fiber traces can be overlayed for comparison on instrument's display. Device determines cause and location of loss of fiber segment including fiber, connectors at each end, plus length of segment, with distance resolution of 0.5 m. It is suited...
Read More »Moisture Detector utilizes coulometric titrimetry.
Portable, ac mains-powered, KF-LAB Test Set detects moisture content of insulating oils, primarily within oil-filled transformers and switchgear. Default setting mode is arranged to give correct settings to test moisture content of insulating oils with specific gravity of 0.875. Unit also analyzes other substances with specific gravities between 0.6-1.4. Detection of moisture content helps...
Read More »