Lechler, Inc.

Fluid & Gas Flow Equipment

Roto Fan Spray Nozzles

Designed to attach to an inlet base and be secured by a retainer cap, Lechler, Inc.'s Roto Fan spray nozzle is a flat fan nozzle that has increased non-clogging features, provides more spray jet power, and produces less fog spray. This Series 656 product has a wide range of spray angle coverages and comes in 303 or 316 stainless steel or brass. Among the applications for which this nozzle may be...

Read More »
Compressed Air Nozzle features stainless steel design.
Fluid & Gas Flow Equipment

Compressed Air Nozzle features stainless steel design.

Operating at inlet air pressures up to 150 psi and temperatures up to 1,000°F, WHISPERBLAST Air Nozzle is suitable for drying off parts, blowing dirt or dust off of parts or equipment, or blowing off rejected items from conveyor. Unit is constructed of 316L stainless steel enabling it to withstand virtually any condition in which it is used, such as pressures and temperatures required in steel...

Read More »
Solid Stream Nozzles suit high pressure showers.
Fluid & Gas Flow Equipment

Solid Stream Nozzles suit high pressure showers.

Available in solid 316 SS or 316 SS with ruby orifice, Needle Jet Nozzles are suited for cleaning on paper machines in paper mills with use of oscillator, as well as any cleaning application requiring high pressure needled jet sprays, such as felts or wires. Second only to diamond in wear resistance, ruby will outlast stainless steel, glass, and ceramic as orifice material. Alternate version of...

Read More »
Ruby Orifice Nozzle trims wet paper to uniform width.
Fluid & Gas Flow Equipment

Ruby Orifice Nozzle trims wet paper to uniform width.

Able to create columnar streams of fluid under low (100 psi) or high (1,000 psi or more), ruby orifice solid stream or needle jet trim nozzle can be used anywhere potent solid stream is required for maximum impact or to trim pliable target. Product is constructed for spray precision, performance consistency, and extended operational life with 316Ti stainless steel housing and ruby orifice....

Read More »
Fluid & Gas Flow Equipment

Pneumatic Atomizing Nozzles features solenoid activation.

Without additional air input, Series 166 creates fine mist for humidification, cooling, or coating. Assembly consists of solenoid coil attached to AirMist pneumatic atomizing nozzle. Solenoid electronically activates nozzle through operation of needle valve, which opens liquid passage of nozzle to allow it to operate and closes it down to shut off flow. This operation is instantaneous and not...

Read More »
Mini Tangential Air Nozzle
Fluid & Gas Flow Equipment

Mini Tangential Air Nozzle

Developed by Lechler for one customer but now being offered to the general public, this air nozzle has a primary initial purpose of spraying air to prevent oxidation of welds. Its short stature allows it to easily get as close as possible to the target area. There are two different tangential models which each perform equivalently: one has a 90Â-º angle to horizontal and the other has a...

Read More »
Air Nozzle features polypropylene construction.
Fluid & Gas Flow Equipment

Air Nozzle features polypropylene construction.

Compliant with FDA standards, PP WhisperBlast has transparent color and 16 channels of concentrated blasting power. Flat configuration which makes unit usable for use individually or side-by-side on header. Appropriate uses include cleaning, drying, and cooling applications in food, beverage, and pharmaceutical industries or wherever harsh acids might come into contact with nozzle. Product comes...

Read More »
Air Nozzles control compressed air in industrial applications.
Fluid & Gas Flow Equipment

Air Nozzles control compressed air in industrial applications.

Available in flat and round versions, WHISPERBLAST® Air Nozzles are suited for drying off parts, blowing dirt or dust off equipment, or blowing rejected items from conveyor. Standard round version supports hand-held applications, while standard flat version, available in aluminum, stainless steel, or zinc, can be installed on machine or used with others on header to create air curtain. For...

Read More »
Fluid & Gas Flow Equipment

Lechler Announces Low Flow Axial Hollow Cone Spray Nozzles

Lechler's Low Flow Axial Hollow Cone spray nozzle (Series 212) creates the absolute finest, fog-like spray mist possible with a hydraulic nozzle. When very low flow rates and extremely small droplets are required for an application but compressed air is not desired or available, this nozzle can fill the bill. This can include applications such as disinfection, humidification, and coating with...

Read More »
Atomizing Spray Nozzle offers flat and round spray patterns.
Fluid & Gas Flow Equipment

Atomizing Spray Nozzle offers flat and round spray patterns.

Available in choice of stainless steel or nickel-plated brass, AirMist(TM) Nozzle provides consistent, precision spray mist with very fine droplets created through collision of fluid and metered air. Unit comes in internal or external mix models and is especially appropriate for spraying applications that require coating, cooling, or humidification. Optional accessories for shut-off control and...

Read More »
Fluid & Gas Flow Equipment

Roto Fan Spray Nozzles

Designed to attach to an inlet base and be secured by a retainer cap, Lechler, Inc.'s Roto Fan spray nozzle is a flat fan nozzle that has increased non-clogging features, provides more spray jet power, and produces less fog spray. This Series 656 product has a wide range of spray angle coverages and comes in 303 or 316 stainless steel or brass. Among the applications for which this nozzle may be...

Read More »
Compressed Air Nozzle features stainless steel design.
Fluid & Gas Flow Equipment

Compressed Air Nozzle features stainless steel design.

Operating at inlet air pressures up to 150 psi and temperatures up to 1,000°F, WHISPERBLAST Air Nozzle is suitable for drying off parts, blowing dirt or dust off of parts or equipment, or blowing off rejected items from conveyor. Unit is constructed of 316L stainless steel enabling it to withstand virtually any condition in which it is used, such as pressures and temperatures required in steel...

Read More »
Solid Stream Nozzles suit high pressure showers.
Fluid & Gas Flow Equipment

Solid Stream Nozzles suit high pressure showers.

Available in solid 316 SS or 316 SS with ruby orifice, Needle Jet Nozzles are suited for cleaning on paper machines in paper mills with use of oscillator, as well as any cleaning application requiring high pressure needled jet sprays, such as felts or wires. Second only to diamond in wear resistance, ruby will outlast stainless steel, glass, and ceramic as orifice material. Alternate version of...

Read More »
Ruby Orifice Nozzle trims wet paper to uniform width.
Fluid & Gas Flow Equipment

Ruby Orifice Nozzle trims wet paper to uniform width.

Able to create columnar streams of fluid under low (100 psi) or high (1,000 psi or more), ruby orifice solid stream or needle jet trim nozzle can be used anywhere potent solid stream is required for maximum impact or to trim pliable target. Product is constructed for spray precision, performance consistency, and extended operational life with 316Ti stainless steel housing and ruby orifice....

Read More »
Fluid & Gas Flow Equipment

Pneumatic Atomizing Nozzles features solenoid activation.

Without additional air input, Series 166 creates fine mist for humidification, cooling, or coating. Assembly consists of solenoid coil attached to AirMist pneumatic atomizing nozzle. Solenoid electronically activates nozzle through operation of needle valve, which opens liquid passage of nozzle to allow it to operate and closes it down to shut off flow. This operation is instantaneous and not...

Read More »
Mini Tangential Air Nozzle
Fluid & Gas Flow Equipment

Mini Tangential Air Nozzle

Developed by Lechler for one customer but now being offered to the general public, this air nozzle has a primary initial purpose of spraying air to prevent oxidation of welds. Its short stature allows it to easily get as close as possible to the target area. There are two different tangential models which each perform equivalently: one has a 90Â-º angle to horizontal and the other has a...

Read More »
Air Nozzle features polypropylene construction.
Fluid & Gas Flow Equipment

Air Nozzle features polypropylene construction.

Compliant with FDA standards, PP WhisperBlast has transparent color and 16 channels of concentrated blasting power. Flat configuration which makes unit usable for use individually or side-by-side on header. Appropriate uses include cleaning, drying, and cooling applications in food, beverage, and pharmaceutical industries or wherever harsh acids might come into contact with nozzle. Product comes...

Read More »
Air Nozzles control compressed air in industrial applications.
Fluid & Gas Flow Equipment

Air Nozzles control compressed air in industrial applications.

Available in flat and round versions, WHISPERBLAST® Air Nozzles are suited for drying off parts, blowing dirt or dust off equipment, or blowing rejected items from conveyor. Standard round version supports hand-held applications, while standard flat version, available in aluminum, stainless steel, or zinc, can be installed on machine or used with others on header to create air curtain. For...

Read More »
Fluid & Gas Flow Equipment

Lechler Announces Low Flow Axial Hollow Cone Spray Nozzles

Lechler's Low Flow Axial Hollow Cone spray nozzle (Series 212) creates the absolute finest, fog-like spray mist possible with a hydraulic nozzle. When very low flow rates and extremely small droplets are required for an application but compressed air is not desired or available, this nozzle can fill the bill. This can include applications such as disinfection, humidification, and coating with...

Read More »
Atomizing Spray Nozzle offers flat and round spray patterns.
Fluid & Gas Flow Equipment

Atomizing Spray Nozzle offers flat and round spray patterns.

Available in choice of stainless steel or nickel-plated brass, AirMist(TM) Nozzle provides consistent, precision spray mist with very fine droplets created through collision of fluid and metered air. Unit comes in internal or external mix models and is especially appropriate for spraying applications that require coating, cooling, or humidification. Optional accessories for shut-off control and...

Read More »

All Topics