Scapa Group plc
Windsor, CT 06095
Adhesive Tape suits mounting and carpet installation.
Double-coated, woven-cotton DubifilmÃ-® 274 is coated on liner side with aggressive rubber adhesive and on exposed side with rubber adhesive that leaves no residue upon removal. Tape handles carpet installation applications, print-plate mounting, and temporary mounting in assembly or machining operations. It is supplied on easy-release polyethylene liner.
Read More »
Thermosetting Film suits bonding, gasketing, and laminating.
ThermoFilmÃ-® H153U, unsupported nitrile phenolic transfer film, is resistant to solvents, plasticizers, and heat when cured. Adhesive film is useful for temperature-sensitive substrates and provides bond strength that is considered to be structural for various applications. Supplied on 60 lb kraft release liner, it is suitable for nameplate mounting, gasketing, bonding dissimilar metals, and...
Read More »
Foam Tape suits assembly and construction applications.
Backed by paper release liner, Scapa P3209 closed-cell, PVC-foam tape is single coated with acrylic, pressure-sensitive adhesive. Soft, multi-purpose tape produces watertight seal, is UV resistant, and is fire rated to DIN 4102 part 1, B2. Applications include window glazing, partition wall construction, and sealing glass walls in chiller cabinet, refrigerator, and freezer assembly applications.
Read More »Adhesive Film is suited for medical device construction.
Medical grade BioflexÃ-® Rx159S-001 consists of polyester film double-coated with permanent acrylic adhesive on one side and removable acrylic adhesive on opposite side. Heat-resistant, permanent acrylic adhesive offers high tack and peel and adheres to various surfaces. Removable adhesive, protected by 60 lb kraft liner, adheres to surfaces such as glass, stainless steel, and plastic and...
Read More »Medical Grade Film is suited for wound dressing.
BioflexÃ-® 235 consists of breathable, medical-grade, thermoplastic, co-polyester extruded film for wound dressing, surgical drape, and gown fabrication. Product provides good barrier properties and can be laminated to various substrates. It is supplied on casting sheet and is available in thicknesses of 1-3 mils.
Read More »
Linerless Tape suits automotive wire harness applications.
SoundGard(TM) 3510 non-woven polyester tape is coated with rubber-based adhesive to minimize unwanted rattle and noise in automotive applications. Zero-halogen product may be torn by hand and provides fluid and abrasion resistance. Available in 9, 15, 19 and 25 mm widths, SoundGard 3510 is 0.55 mm thick and dampens sound in vehicles by up to 12.5 dB. Providing temperature resistance up to 125Ã-
Read More »Adhesive Film suits direct skin application.
BioflexÃ-® Rx914P breathable, co-polyester film is single coated with medical grade acrylic, pressure-sensitive adhesive. Adhesive carries Device Master File Number with Bureau of Medical Devices and is supplied with 60 lb. kraft release liner. It adheres well to skin, yet removes cleanly without causing skin trauma, making it suitable for wound care, ostomy care, IV dressing, and medical...
Read More »
Adhesive Transfer Film suits mounting/assembly applications.
Supplied on 47 lb kraft liner, 1.6 mil unsupported acrylic Scapa T002 uses acid-neutral (pH 7) acrylic adhesive formulated with glass fibers for dimensional stability. With grab characteristics suited for splicing, product provides good initial tack, bonding power, and resistance to UV exposure. It may be applied using TD-1 tape dispenser or application gun that provides smooth adhesive...
Read More »
Medical-Grade Tape uses pressure-sensitive adhesive.
Made of tan, elasticized, woven fabric, BioflexÃ-® Rx1034P is coated on one side with medical-grade, acrylic, pressure-sensitive adhesive. Product adheres to skin and removes without causing irritation, making it suitable for direct skin contact on contoured areas of patients' bodies. Able to be die cut, it is also suited for use with specialized dressings and in medical device attachment...
Read More »
Adhesive Film suits automotive assembly applications.
UnifilmÃ-® U650A acrylic-adhesive transfer film adheres to foams, plastics, metals, and fabrics. It can be laminated to variety of substrates, including foam materials for gasketing and NVH applications. Film is suitable for applying nameplates and decorative parts, bonding interior trim and instrument-panel components, and assembling leather-covered seats and steering wheels.
Read More »