Scapa Group plc

Double Coated Adhesive Film is suited for temporary bonding.
Adhesives & Sealants

Double Coated Adhesive Film is suited for temporary bonding.

Formulated with permanent acrylic adhesive on one side and removable acrylic adhesive on other, Dublfilm S1039 bonds to high surface energy materials such as glass and metal and removes without leaving residue. Dimensionally stable, polyester film is supplied with 74 lb lay flat release liner to facilitate application and die-cutting. This double-coated adhesive tape will permanently laminate to...

Read More »
Adhesives & Sealants

Transfer Adhesives suit high temperature applications.

Designed to protect flexible printed circuits, Unifilm U801 and U801NP are 5 mil acrylic adhesives that maintain optimal shear properties at temperatures greater than 375°F. U801 is supplied with 64 lb printed polycoated kraft release liner, while U801N features unprinted liner. Products adhere to variety of metals and plastics including polyimide, polyester, and ABS, making them suited for...

Read More »
Adhesives & Sealants

Foam Tape resists abrasion, corrosion, and moisture.

Double coated with acrylic adhesive, closed-cell polyethylene foam tape, Scapa 5414, seals out air, moisture, and chemicals, and also helps prevent corrosion. Tape offers resistance to dilute acids, alkalis, and UV light, and is suitable for indoor and outdoor applications. Paper release liner controls dimensional changes in industrial bonding, sealing, and assembly applications.

Read More »
Adhesives & Sealants

Adhesive Tape is suited for direct skin applications.

Designed for long term wear, Bioflex® Rx1207P is comprised of tan polyester tricot fabric that is single coated with medical grade acrylic adhesive. Tricot fabric is breathable and resistant to dirt and moisture. Cleanly removable without causing skin trauma, adhesive has passed cytotoxicity and skin sensitization testing. Product is suited for roll form bandages, specialized medical components,...

Read More »
Adhesives & Sealants

Adhesive Tape aids in foam fabrication applications.

Double coated with rubber adhesive, polyester Dublfilm® S1026 is supplied with 70# polycoated kraft release liner to enhance die cutting capabilities. Delivering high initial peel and tack that facilitates splicing applications, product offers adhesion to substrates such as low surface energy polyolefin films, polyester films, and polyurethane foams, and is intended for applications such as...

Read More »
Adhesives & Sealants

Transfer Adhesive suits direct skin applications.

Patterned medical grade acrylic transfer adhesive, Bioflex Rx650U, is suited for skin applications such as device attachment, dressings, surgical drapes, ostomy, and wound care. Supplied with 76# polycoated release liner, 0.5 mil adhesive layer is applied in discontinuous cross-hatch pattern coating for breathability, fluid transmission, and moisture vapor transmission. Pattern coating results in...

Read More »
Adhesives & Sealants

Matte Gaffers' Tape holds down wires and cables.

Available in variety of colors, polyethylene-coated Scapa 3130 is suited for range of non-reflective marking, masking, splicing, and audio visual entertainment uses. Conformable cloth tape offers waterproof properties, initial tack, and ultimate adhesion. Available in widths of 1, 1.5, 2, 3, and 4 in., product tears easily and can be written on. It can be used on cords and wiring in on-stage,...

Read More »
Adhesives & Sealants

Acrylic Transfer Adhesive targets industrial assembly.

Offering resistance to plasticizers and oils found in foam substrates, Ultrafilm(TM) U740A bonds to variety of foams and low surface energy materials. It provides consistent bond upon lamination, and is resistant to water and ambient humidity. Suited for general product assembly, foam lamination, and gasketing, product is 4.0 mils thick and is supplied with 74 No. polycoated release liner to...

Read More »
Masking Tape suits printed circuit fabrication.
Adhesives & Sealants

Masking Tape suits printed circuit fabrication.

Consisting of specially treated paper, single-coated with silicone pressure sensitive adhesive, high-temperature Scapa 650 provides low static protection of gold-plated finger tabs, assembly holes, and components during flux, preheat, and soldering processes. During hot air leveling and wave soldering operations, tape protects against chemical, solvents, solder, and rinse water. After processing,...

Read More »
Low Fogging Transfer Adhesives are suited for foam bonding.
Adhesives & Sealants

Low Fogging Transfer Adhesives are suited for foam bonding.

Acrylic transfer adhesives Unifilm® U617A and U618A, suited for automotive assembly applications such as general assembly and foam lamination, adhere to ether and ester foams as well as surfaces such as low surface energy plastics. Unifilm U617A, available in 3 mil thickness, exhibits resistance to chemicals, environmental extremes, and aging. Available in 4 mil thickness, Unifilm U618A exhibits...

Read More »

All Topics