Rectorseal Corporation

New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings
Fluid & Gas Flow Equipment

New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings

Features 5-1/2-inch-long (140-mm), lightweight hand-held that dispenses a 250-psi (17.2-bar) pressurized burst from a recyclable CO2 cartridge to flush debris from blocked condensate drain lines. Comes with ergonomic handle-shaped body that features a non-slip, thumb-activated trigger that fires air stream once the red safety lever is released. Offers tapered design that allows service techs to...

Read More »
RectorSeal Presents New RSH Series Surge Protective Devices That Meets UL 1449 Standards
Electronic Components & Devices

RectorSeal Presents New RSH Series Surge Protective Devices That Meets UL 1449 Standards

Available in RSH-50 and RSH-60 models in 6-pack and 4-pack with 36 x 38-mm and 89 x 73 x 63.5 mm dimensions respectively. Designed to protect all single phase, 120/240-V air conditioning, heat pumps and ductless mini-split systems from natural-cause surges and transient over-voltage. RSH-50 that protects from up to 50,000 A single surges and up to 10,000 A repetitive surges whereas the RSH-60...

Read More »
New Acid-Away Pro Injector is Formulated for All Refrigeration Oils
Packaging Products & Equipment

New Acid-Away Pro Injector is Formulated for All Refrigeration Oils

Acid-Away Pro Injector is designed for eliminating acid in residential, commercial refrigeration and air-conditioning systems. The unit consists of 44 ml copper reservoir with a 1/4 in. (high side) standard brass connection fitting and 1/4 in. (low side) features a Schrader valve brass connection fitting. The Acid-Away product changes acid into a neutral, non-corrosive substance and is used for...

Read More »
New Metacaulk Cast In-Place Devices Come with Snap-Fit Extentions

New Metacaulk Cast In-Place Devices Come with Snap-Fit Extentions

Metacaulk® Cast In-Place Devices are offered in construction trade size 5, 7.5, 10 and 15-cm O.D. Units are capable of making mixed multiple penetrations of pipe and cable. Designed for firestopping HVAC, plumbing and electrical piping and cable-through penetrations, the CIDs feature built-in internal intumescent firestop ring, tub box and snap-fit metal decking floor adaptors. Units meet UL...

Read More »
New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings
Fluid & Gas Flow Equipment

New LineShot Flushing Tool from RectorSeal is ideal for Access Cleanout Fittings

Features 5-1/2-inch-long (140-mm), lightweight hand-held that dispenses a 250-psi (17.2-bar) pressurized burst from a recyclable CO2 cartridge to flush debris from blocked condensate drain lines. Comes with ergonomic handle-shaped body that features a non-slip, thumb-activated trigger that fires air stream once the red safety lever is released. Offers tapered design that allows service techs to...

Read More »
Company News

RectorSeal® Wins Product Design Award for TripleGuard™ Water Leak Property Protection System

TripleGuard™, a smart water leak monitoring, detection and prevention system wins Dealer Design Award sponsored by the HVAC/R industry magazine The News. Houston -- RectorSeal® LLC, a manufacturer of quality HVAC/R products, won a product design award July 29 for its TripleGuard™, a smart water leak monitoring, detection and prevention system designed to protect commercial and...

Read More »
RectorSeal Presents New RSH Series Surge Protective Devices That Meets UL 1449 Standards
Electronic Components & Devices

RectorSeal Presents New RSH Series Surge Protective Devices That Meets UL 1449 Standards

Available in RSH-50 and RSH-60 models in 6-pack and 4-pack with 36 x 38-mm and 89 x 73 x 63.5 mm dimensions respectively. Designed to protect all single phase, 120/240-V air conditioning, heat pumps and ductless mini-split systems from natural-cause surges and transient over-voltage. RSH-50 that protects from up to 50,000 A single surges and up to 10,000 A repetitive surges whereas the RSH-60...

Read More »
Mergers & Acquisitions

RectorSeal Acquires All-Access™ Brand of HVAC Condensate Management Products

Acquisition includes expertise of All-Access developer Stuart Oakner, who will support RectorSeal product development. Houston--RectorSeal LLC, a manufacturer of quality HVAC/R products and operating subsidiary of CSW Industrials, Inc. (NASDAQ: CSWI), recently acquired the assets of MSD Research including its All-Access™ brand of air conditioning system condensate management...

Read More »
Company News

RectorSeal® Names Target Sales as Its Manufacturer's Representative for Florida and Puerto Rico Territories

HOUSTON--RectorSeal® LLC, Houston, a manufacturer and distributor of quality HVAC/R products, has named Target Sales, Tampa, Fla., as its manufacturer’s representative for the territories of Florida and Puerto Rico.  Target Sales covers Florida with five sales people as well as having a strong inside sales team. Target Sales represents HVAC residential and commercial equipment companies,...

Read More »

All Topics