Ics Electronics
Pleasanton, CA 94588
Share:

Interface Board controls RS-232 and RS-485 Modbus RTU devices.
With Model 9009, temperature chambers and other Modbus controlled slave devices can be controlled from Ethernet, GPIB, or USB source or test system. Board's Ethernet port supports VXI-11 and raw socket protocol, Modbus TCP/IP conversion, and internal HTML web server. Modbus TCP/IP packets are directly converted into Modbus RTU packets. With Control Page, WebServer lets user enter commands from...
Read More »
GPIB to I²C Interface Board minimizes wiring, expands control.
Used for controlling I-²C devices from GPIB Bus, Model 4802 provides I-²C serial bus, 8-bit parallel bus, and asynchronous serial interface. I-²C signals control devices that comply with I-²C Specification v3.0 dated June 2007 and also with SMBus Specification 2.0 when used in Standard Mode with 100 kHz bit rate. This IEEE-488.2 compatible interface board may also be used in Fast Mode with...
Read More »
Interface Board controls digital devices over network.
Offering Ethernet to Digital interface, Model 8003 provides 40 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. User can control I/O lines from any computer with NIC or from TCP/IP network. Handshake lines are provided for synchronizing data transfers from external devices or for latching data into external devices. Board can also monitor 15 input lines and generate...
Read More »Ethernet-to-Relay Interface is VXI-11.3 compliant.
Designed for switching signals and controlling external devices over company network or Internet, Model 8064 Ethernet-to-Relay Interface adds 16 relay contacts/16 relay drivers, and isolated digital inputs to Ethernet based test system. User has choice of low-level contacts for switching A/D signals or heavy-duty contacts for switching loads up to 1 A. Relay driver option provides 16 outputs for...
Read More »
Ethernet-to-Digital Interface Board provides 48 digital I/O.
Designed to control digital devices over company network or Internet, Model 8063 Ethernet-to-Parallel Interface offers 48 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. Unit can monitor 15 input lines and generate VXI-11 Service Request messages when enabled line changes state. Handshake lines are provided for synchronizing data transfers or for latching data into...
Read More »
USB to GPIB Hub Controller works with test instruments.
Model 1105 combines GPIB Controller and USB powered hub, making it possible to convert any desktop or portable PC with USB interface into full-function, IEEE 488.2 compatible Bus Controller. Supports Windows 98, ME, 2000, and XP and programming languages like Visual Basic and Visual C/C++. It has six powered USB ports for driving USB instruments or other USB devices. Unit can be rack mounted in...
Read More »
Interface Module connects USB to GPIB.
Model 488-USB converts desktop or portable PCs with USB interface into full-function, IEEE 488.2 GPIB compatible bus controller. Module plugs onto any open GPIB connector, such as open end of cable stack, on back of instrument, or unused connector on company's GPIB BusStrip(TM). Finger size jackscrews secure and hold module in any position. Applications include controlling instruments, collecting...
Read More »
Module is suitable for test and measurement applications.
Model 4867 data acquisition module can be used to control analog and digital devices from GPIB bus. It has 32 digital I/O lines, 6 relay driver outputs, 6 analog outputs, 6 analog inputs and 4 thermocouple inputs. Digital lines are high-power TTL lines with pullups that can be configured as inputs or outputs in 8-bit bytes. Relay driver outputs sink up to 300 mA and have reverse voltage...
Read More »
Interface Board controls RS-232 and RS-485 Modbus RTU devices.
With Model 9009, temperature chambers and other Modbus controlled slave devices can be controlled from Ethernet, GPIB, or USB source or test system. Board's Ethernet port supports VXI-11 and raw socket protocol, Modbus TCP/IP conversion, and internal HTML web server. Modbus TCP/IP packets are directly converted into Modbus RTU packets. With Control Page, WebServer lets user enter commands from...
Read More »
GPIB to I²C Interface Board minimizes wiring, expands control.
Used for controlling I-²C devices from GPIB Bus, Model 4802 provides I-²C serial bus, 8-bit parallel bus, and asynchronous serial interface. I-²C signals control devices that comply with I-²C Specification v3.0 dated June 2007 and also with SMBus Specification 2.0 when used in Standard Mode with 100 kHz bit rate. This IEEE-488.2 compatible interface board may also be used in Fast Mode with...
Read More »
Interface Board controls digital devices over network.
Offering Ethernet to Digital interface, Model 8003 provides 40 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. User can control I/O lines from any computer with NIC or from TCP/IP network. Handshake lines are provided for synchronizing data transfers from external devices or for latching data into external devices. Board can also monitor 15 input lines and generate...
Read More »Ethernet-to-Relay Interface is VXI-11.3 compliant.
Designed for switching signals and controlling external devices over company network or Internet, Model 8064 Ethernet-to-Relay Interface adds 16 relay contacts/16 relay drivers, and isolated digital inputs to Ethernet based test system. User has choice of low-level contacts for switching A/D signals or heavy-duty contacts for switching loads up to 1 A. Relay driver option provides 16 outputs for...
Read More »
Ethernet-to-Digital Interface Board provides 48 digital I/O.
Designed to control digital devices over company network or Internet, Model 8063 Ethernet-to-Parallel Interface offers 48 parallel I/O lines that can be configured as inputs or outputs in 8-bit bytes. Unit can monitor 15 input lines and generate VXI-11 Service Request messages when enabled line changes state. Handshake lines are provided for synchronizing data transfers or for latching data into...
Read More »
USB to GPIB Hub Controller works with test instruments.
Model 1105 combines GPIB Controller and USB powered hub, making it possible to convert any desktop or portable PC with USB interface into full-function, IEEE 488.2 compatible Bus Controller. Supports Windows 98, ME, 2000, and XP and programming languages like Visual Basic and Visual C/C++. It has six powered USB ports for driving USB instruments or other USB devices. Unit can be rack mounted in...
Read More »
Interface Module connects USB to GPIB.
Model 488-USB converts desktop or portable PCs with USB interface into full-function, IEEE 488.2 GPIB compatible bus controller. Module plugs onto any open GPIB connector, such as open end of cable stack, on back of instrument, or unused connector on company's GPIB BusStrip(TM). Finger size jackscrews secure and hold module in any position. Applications include controlling instruments, collecting...
Read More »
Module is suitable for test and measurement applications.
Model 4867 data acquisition module can be used to control analog and digital devices from GPIB bus. It has 32 digital I/O lines, 6 relay driver outputs, 6 analog outputs, 6 analog inputs and 4 thermocouple inputs. Digital lines are high-power TTL lines with pullups that can be configured as inputs or outputs in 8-bit bytes. Relay driver outputs sink up to 300 mA and have reverse voltage...
Read More »