Z-World
Davis, CA 95616
Share:
Application Kit provides Rabbit-based control.
GPRS/GSM Application Kit provides tools required to develop applications that combine Rabbit-based control device with GSM/GPRS modem. Equipped with libraries and sample programs, kit also contains LCD/keypad module with menu system that enables users to read/send text messages and e-mail. It also includes enfora(TM) Spider SA-GL Quad Band wireless modem and antenna, and Dynamic C(TM) integrated...
Read More »
GPRS/GSM Kit offers wireless automation and control.
GPRS/GSM Application Kit integrates embedded controls with wireless GPRS/GSM communication applications. Libraries and sample programs allow device connected to cellular network to send SMS messages to RCM that can interpret messages as commands and execute control functions. RCM can send/receive GPRS e-mail wirelessly to/from any PC, GSM device, or cell phone. Kit lets machines notify user when...
Read More »
Single Board Computer features Rabbit 3000 microprocessor.
BL2600 Wolf is available with or without 10/100 Ethernet and utilizes Rabbit 3000(TM) microprocessor at 44.2 and 29.4 MHz, respectively, with 512 k Flash and 512 k SRAM standard. Dual entry IDC through-hole sockets allow header mounting on either side of board and polarized industry-standard friction-lock-connectors enable assembly with wire harnesses. Computer includes digital I/O ports, A/D...
Read More »
Relay Card transmits data at 1 Mbps up to 33 ft.
RabbitNet Model RN 1400 consists of 6 SPDT, 10 Aac relays with built-in snubbers. It measures 3.94 x 5.91 x 0.75 and can mount on DIN rail tray. RabbitNet expansion mechanism is based on full-duplex technology, utilizing off-the-shelf Ethernet cables. When used with compatible control device acting as master, RabbitNet products can be used to expand existing system functionality or increase...
Read More »Software lets users write, compile, and test codes.
Dynamic CÃ-® v8 integrated development software includes all capabilities of previous versions, acting as integrated C compiler, editor, loader, and debugger. While program runs on controller, user debugs from Dynamic C on PC without in-circuit emulators, logic analyzers, or software simulators. Product allows users to write, compile, and test C and assembly code without leaving development...
Read More »Digital I/O Card expands available I/O in SBCs.
Suited for use with company's SBCs (BL2500) and operator interfaces (OP7200), RN1100 RabbitNet I/O expansion mechanism is based on 3-wire, full duplex technology. Product utilizes off-the-shelf Ethernet cables, transmitting data at rates to 1 Mbit/sec over maximum recommended distance of 33 ft. Mounted on 100 mm DIN rail tray, unit features I/O set consisting of 24 inputs and 16 sink/source...
Read More »
Digital I/O Card extends uses of embedded control systems.
DIN-rail mountable RabbitNet(TM) RN1100 peripheral I/O card has friction-lock connectors and expansion ports that enable modular and expandable embedded control system to be adapted for various applications. Typical RabbitNet system consists of master SBC and one or more peripheral I/O cards. Programs are developed and debugged using Dynamic CÃ-® software, which runs on Windows PC. Features...
Read More »
Serial-Ethernet Bridge requires no programming.
Model EM1500 converts multi-point serial communications to TCP/IP network. It connects to and network-enables up to 4 RS-232 serial devices simultaneously, while acting as master on multi-drop RS-485 network. Unit provides SPDT relay, 2 digital open collector outputs, and 3 digital inputs suitable for interfacing to mechanical switches or logic level circuits. Bridge is configured over Ethernet...
Read More »
Single Board Computer suits high volume OEM applications.
Coyote OEM2500 comes with or without Ethernet and can be customized to user-specified configurations. It includes Rabbit 3000(TM) microprocessor at 29.4 MHz, 256 K Flash and 128 K SRAM, 5 serial ports, 16 I/O ports, 4 LEDs, and 10 timers. Ethernet option offering 10Base-T or 10/100Base-T upgrade is fully supported by TCP/IP stack to allow easy programming, data acquisition, and control of...
Read More »Operator Interface/HMI offers data acquisition and display.
Model OP7200 eDisplay is a C-programmable operator interface/HMI with built-in Ethernet connectivity. Unit's 10Base-T Ethernet facilitates remote diagnostics, control, and communication, including sending and receiving E-mails and alerts. Two models incorporate 24-27 digital I/O plus I/O expansion port, 4 serial ports, Rabbit 2000 microprocessor at 22.1 MHz, 256K Flash, and 128K SRAM. Digital I/O...
Read More »
Application Kit provides Rabbit-based control.
GPRS/GSM Application Kit provides tools required to develop applications that combine Rabbit-based control device with GSM/GPRS modem. Equipped with libraries and sample programs, kit also contains LCD/keypad module with menu system that enables users to read/send text messages and e-mail. It also includes enfora(TM) Spider SA-GL Quad Band wireless modem and antenna, and Dynamic C(TM) integrated...
Read More »
GPRS/GSM Kit offers wireless automation and control.
GPRS/GSM Application Kit integrates embedded controls with wireless GPRS/GSM communication applications. Libraries and sample programs allow device connected to cellular network to send SMS messages to RCM that can interpret messages as commands and execute control functions. RCM can send/receive GPRS e-mail wirelessly to/from any PC, GSM device, or cell phone. Kit lets machines notify user when...
Read More »
Single Board Computer features Rabbit 3000 microprocessor.
BL2600 Wolf is available with or without 10/100 Ethernet and utilizes Rabbit 3000(TM) microprocessor at 44.2 and 29.4 MHz, respectively, with 512 k Flash and 512 k SRAM standard. Dual entry IDC through-hole sockets allow header mounting on either side of board and polarized industry-standard friction-lock-connectors enable assembly with wire harnesses. Computer includes digital I/O ports, A/D...
Read More »
Relay Card transmits data at 1 Mbps up to 33 ft.
RabbitNet Model RN 1400 consists of 6 SPDT, 10 Aac relays with built-in snubbers. It measures 3.94 x 5.91 x 0.75 and can mount on DIN rail tray. RabbitNet expansion mechanism is based on full-duplex technology, utilizing off-the-shelf Ethernet cables. When used with compatible control device acting as master, RabbitNet products can be used to expand existing system functionality or increase...
Read More »Software lets users write, compile, and test codes.
Dynamic CÃ-® v8 integrated development software includes all capabilities of previous versions, acting as integrated C compiler, editor, loader, and debugger. While program runs on controller, user debugs from Dynamic C on PC without in-circuit emulators, logic analyzers, or software simulators. Product allows users to write, compile, and test C and assembly code without leaving development...
Read More »Digital I/O Card expands available I/O in SBCs.
Suited for use with company's SBCs (BL2500) and operator interfaces (OP7200), RN1100 RabbitNet I/O expansion mechanism is based on 3-wire, full duplex technology. Product utilizes off-the-shelf Ethernet cables, transmitting data at rates to 1 Mbit/sec over maximum recommended distance of 33 ft. Mounted on 100 mm DIN rail tray, unit features I/O set consisting of 24 inputs and 16 sink/source...
Read More »
Digital I/O Card extends uses of embedded control systems.
DIN-rail mountable RabbitNet(TM) RN1100 peripheral I/O card has friction-lock connectors and expansion ports that enable modular and expandable embedded control system to be adapted for various applications. Typical RabbitNet system consists of master SBC and one or more peripheral I/O cards. Programs are developed and debugged using Dynamic CÃ-® software, which runs on Windows PC. Features...
Read More »
Serial-Ethernet Bridge requires no programming.
Model EM1500 converts multi-point serial communications to TCP/IP network. It connects to and network-enables up to 4 RS-232 serial devices simultaneously, while acting as master on multi-drop RS-485 network. Unit provides SPDT relay, 2 digital open collector outputs, and 3 digital inputs suitable for interfacing to mechanical switches or logic level circuits. Bridge is configured over Ethernet...
Read More »
Single Board Computer suits high volume OEM applications.
Coyote OEM2500 comes with or without Ethernet and can be customized to user-specified configurations. It includes Rabbit 3000(TM) microprocessor at 29.4 MHz, 256 K Flash and 128 K SRAM, 5 serial ports, 16 I/O ports, 4 LEDs, and 10 timers. Ethernet option offering 10Base-T or 10/100Base-T upgrade is fully supported by TCP/IP stack to allow easy programming, data acquisition, and control of...
Read More »Operator Interface/HMI offers data acquisition and display.
Model OP7200 eDisplay is a C-programmable operator interface/HMI with built-in Ethernet connectivity. Unit's 10Base-T Ethernet facilitates remote diagnostics, control, and communication, including sending and receiving E-mails and alerts. Two models incorporate 24-27 digital I/O plus I/O expansion port, 4 serial ports, Rabbit 2000 microprocessor at 22.1 MHz, 256K Flash, and 128K SRAM. Digital I/O...
Read More »