80/20, Inc.
Columbia City, IN 46725
80/20 Adds New Hidden Corner Connectors for T-Slotted Framing
80/20, Inc., manufacturer of the original Industrial Erector Set , recently added new Corner Connectors to their line of T-slotted aluminum framing components. Clear finished, die-cast zinc Corner Connectors are available in inside-to-inside and inside-to-outside versions. These connectors provide a hidden 90 degree corner connection for 15, 30, 40 and 45 Series T-slotted profiles, and are ideal...
Read More »
80/20's Aluminum Structural Shapes and Custom Machining Allow Design Flexibility
80/20 currently offers more than 180 different types of aluminum Structural Shapes, including rectangles, squares, flat stock, angles, bearing profiles and more, in both fractional and metric sizes. Structural Shapes are available in clear anodized or mill finish, full or custom length. Although 80/20 carries hundreds of fabricated brackets and mounting plates, you may need a non-standard plate,...
Read More »
T-Slot Framing System offers stainless steel leveling feet.
T-slotted aluminum framing system, The Industrial Erector Set, accepts leveling feet. Eight bases made from 304 SS are available with or without floor mount holes, in diameters of 30-120 mm, with load capacities up to 8,800 lb and anti-slip rubber pads. Additional options for feet include choice of stainless steel threaded stems in 15+ different lengths, available in metric sizes from M8-M20 and...
Read More »
Blocks enable mounting of T-slotted aluminum profiles.
Compatible with 6, 10, and 25 Series T-slotted aluminum profiles, Quarter-Turn Panel Mount Blocks come with either Ã-¼-20 or M6 vertically adjustable square nuts inserted in fiberglass-reinforced nylon body. Spacers are molded of same material in thicknesses of 2, 3, and 5 mm, enabling use of various panel thicknesses and locations. Blocks facilitate mounting of plastic panels in T-slotted...
Read More »Extruded Profiles can use fractional or metric hardware.
Smooth surfaced Metric Extruded Profiles are available in 20, 30, 45, and 45 mm lite series. T-Slotted aluminum profiles are suited for applications that include machine frames, office furniture, cleanrooms, machine guards and enclosures, motion picture fixtures and lighting, material handling equipment, and prototype equipment.
Read More »Aluminum Frames eliminate need for pressurizing.
Machine frames and workstations can be assembled using modular T-slotted aluminum extrusions that also act as manifold. Frames can be turned into manifold by capping off ends of extrusion with pressure manifold plates, which are made from clear anodized aluminum and can withstand up to 150 psi of positive or negative pressure. Pressure manifold plates can be side or end-mounted, and come complete...
Read More »
Stanchions add 4th or 5th axis to T-slotted frames.
Quick Clamp Stanchions are available in over 40 standard models, including single or double shaft bases, blank or pre-drilled mounting plates, and single or double mounting blocks in 1, 1.5, and 2 in. bore sizes. Adjustable without use of tools, devices allow user to precisely position camera equipment, scanning devices, light sources, photo sensors, computer monitors, and actuators.
Read More »
Framing System suits material handling applications.
HT Series modular aluminum framing system is suited for designing carts, gravity feed racks, or integrating with existing T-slotted aluminum lumber. Product line offers 20 styles of bars to meet project requirements. Working with HT Series requires users to cut bars to length and select connection method. Accessories, such as joining plates, doors, and panels, are available.
Read More »
Frame Fabrication Service builds to customer specifications.
Frame Fabrication Services include full assembly or sub-assembly, and complete packaging, crating, and shipping. Frames are built to specification utilizing T-slotted aluminum extrusion technology. Ready-to-use projects are provided in as little as 2 working days.
Read More »
Aluminum Profiles are clear anodized for protection.
Offering 24 aluminum T-slotted profile shapes, The Industrial Erector SetÃ-® gives users various options, allowing creativity when designing projects and creating solutions to problems. They include closed surface framing choices, metric or fractional units, and smooth surface or Align-a-Groove(TM) framing.
Read More »
80/20 Adds New Hidden Corner Connectors for T-Slotted Framing
80/20, Inc., manufacturer of the original Industrial Erector Set , recently added new Corner Connectors to their line of T-slotted aluminum framing components. Clear finished, die-cast zinc Corner Connectors are available in inside-to-inside and inside-to-outside versions. These connectors provide a hidden 90 degree corner connection for 15, 30, 40 and 45 Series T-slotted profiles, and are ideal...
Read More »
80/20's Aluminum Structural Shapes and Custom Machining Allow Design Flexibility
80/20 currently offers more than 180 different types of aluminum Structural Shapes, including rectangles, squares, flat stock, angles, bearing profiles and more, in both fractional and metric sizes. Structural Shapes are available in clear anodized or mill finish, full or custom length. Although 80/20 carries hundreds of fabricated brackets and mounting plates, you may need a non-standard plate,...
Read More »
T-Slot Framing System offers stainless steel leveling feet.
T-slotted aluminum framing system, The Industrial Erector Set, accepts leveling feet. Eight bases made from 304 SS are available with or without floor mount holes, in diameters of 30-120 mm, with load capacities up to 8,800 lb and anti-slip rubber pads. Additional options for feet include choice of stainless steel threaded stems in 15+ different lengths, available in metric sizes from M8-M20 and...
Read More »
Blocks enable mounting of T-slotted aluminum profiles.
Compatible with 6, 10, and 25 Series T-slotted aluminum profiles, Quarter-Turn Panel Mount Blocks come with either Ã-¼-20 or M6 vertically adjustable square nuts inserted in fiberglass-reinforced nylon body. Spacers are molded of same material in thicknesses of 2, 3, and 5 mm, enabling use of various panel thicknesses and locations. Blocks facilitate mounting of plastic panels in T-slotted...
Read More »One-Stop Shopping Just Got Easier!
Now available, an enhanced line of 20, 30 and 45 mm Profiles and Accessories. 80/20's T-Slot Parts Supplement 1 - Expanded Version now offers a larger selection of aluminum profiles, plus new fasteners, joining plates, and accessories. The new mini-catalog is a great tool, providing all the products in one book to support this new product line. Whether your application already contains 20, 30 or...
Read More »Profiles, Fasteners & Accessories for 80/20-® and Non-80/20-® T-Slot Profiles
Get hundreds of new parts for T-slotted aluminum framing at your fingertips. 80/20Ã-® announces the release of its second T-Slot Parts catalog, T-Slot Parts Supplement 2! Supplement 2 offers a new line of fasteners, connectors, joining plates, hinges, floor to frame and other accessories that fit 80/20's 10, 15, 25 and 40 Series T-slotted aluminum profiles. T-Slot Parts by 80/20Ã-® offers...
Read More »The All-New 80/20-® Big Book of Solutions
November 16, 2006 With the largest product offering available, the leader in modular T-slotted aluminum framing has just released a NEW catalog, featuring: o 1,104 pages of solutions!!! o NEW purple section (20, 30 and 45 Series Metric parts and profiles) o Redesigned layout for Fractional and Metric sections o Revamped HT Series and Quick Frame sections o New pictures o New drawings Included are...
Read More »Extruded Profiles can use fractional or metric hardware.
Smooth surfaced Metric Extruded Profiles are available in 20, 30, 45, and 45 mm lite series. T-Slotted aluminum profiles are suited for applications that include machine frames, office furniture, cleanrooms, machine guards and enclosures, motion picture fixtures and lighting, material handling equipment, and prototype equipment.
Read More »Experience PLUS!
The home of the renowned Industrial Erector SetÃ-® announces a PLUS to doing business with 80/20. That PLUS is our undivided attention to guiding you every step of the way from project conception to project completion. The new 80/20 Plus Book of Ideas offers Created Solutions that will help you get a little closer to your completed project. 80/20 PLUS offers design assistance and professional...
Read More »Aluminum Frames eliminate need for pressurizing.
Machine frames and workstations can be assembled using modular T-slotted aluminum extrusions that also act as manifold. Frames can be turned into manifold by capping off ends of extrusion with pressure manifold plates, which are made from clear anodized aluminum and can withstand up to 150 psi of positive or negative pressure. Pressure manifold plates can be side or end-mounted, and come complete...
Read More »