Optek Technology, Inc.
Carrollton, TX 75006
Share:
Infrared Optoelectronic Sensors feature digital logic output.
Featuring data rates to 250 kbaud, miniature OPL611 series photo light sensors consist of PhotologicÃ-® chip encapsulated in transparent molded plastic, providing optical coupling and mechanical protection. Sensors are available with buffer and inverter 10 K internal pull-up, open collector outputs, and direct TTL/LSTTL CMOS interface. Measuring 3 x 3 x 1 mm, surface mount units accept input...
Read More »
Fluid Sensors incorporate automatic calibration circuitry.
Used for detecting fluid presence in transparent tubing, OCB350 Series consists of LED and phototransistor packaged in opaque plastic housing that enhances ambient light rejection. It requires only optical device and power supply for operation, and included features minimize effects of changes in sensor's optics due to manufacturing variances, ambient light, temperature fluctuation, and...
Read More »OPTEK Receives Industry Leadership, Best Technology Awards from LED Journal
CARROLLTON, TX (January 29, 2008) -- TT electronics OPTEK Technology, a leading global manufacturer of LED components and arrays, has received two Innova Awards from LED Journal. OPTEK received first place in the categories of Best Technology and Industry Leadership for its 1-watt LED package and visible LED lab, respectively. OPTEK strives to contribute to the enhancement of technology in the...
Read More »
Optek's LEDs Selected for Microchip Technology's Lighting Design Kit, Color-Control Software Solution and LED Driver
Tunable, full-color RGB; 1W and 10W LED devices exhibit efficiency, high reliability... CARROLLTON, TX (June 28, 2007) - TT electronics OPTEK Technology's 6-pin PLCC LED has been specified by Microchip Technology Inc.'s [NASDAQ: MCHP] LED Lighting Design Guide and designed for use with their color-control software solution; while OPTEK's 1W and 10W Lednium devices have been selected as part of a...
Read More »
LED Package suits both single use and array applications.
Measuring 6 x 6 mm with 1.5 mm height, Model OVS5WBCR4 0.5 W surface mount white LED package comes with water clear lens and 120Ã-
Read More »
Low Profile LED Package provides 130-
Designed for high current drive, surface mount Model OVSPRGBCR4 is composed of red, green, and blue LED with water clear lenses mounted on top of devices. Each color can be independently controlled, as well as programmed for color mixing. Typical luminous flux for red, green, and blue LEDs is 21l m, 32l m, and 7.5l m, with typical on-axis intensity of 7 cd, 11 cd, and 2.8 cd, respectively....
Read More »
Reflective Switches provide object sensing up to 24 in.
Consisting of 850 nm infrared LED and PhotologicÃ-® sensor with NPN open-collector output, both contained in opaque housing, Series OPB725 switches provides design engineers with device capable of operating in dusty, contaminated environments. With operating temperature range of 0 to 50Ã-
Read More »Collimated Beam LED is suited for long-distance sensing.
Featuring GaAlAs LED with 875 nm wavelength mounted in TO-46 metal can package, OP205CL Series provides design engineers with IR emitter that produces uniform narrow 10Ã-
Read More »
Reflective Switch provides safe machine operation.
Series OPB732 non-contact IR switches have reflective distance exceeding 3 in., depending on circuitry and reflective material. Device features opaque housing, which reduces the sensor's ambient light sensitivity, and is available with custom electrical, wire and cabling, and connectors. IR LED has 850 nm wavelength and power dissipation of 100 mW. Offered with PC board through hole pins or 24...
Read More »
Fiber Optic Transmitters incorporate 850 nm GaAlAs LED.
OPF670 Series LED transmitter family consists of OPF670 in TO-46 package, OPF672 in standard profile metal housing, and OPF673 in low profile metal housing, all designed to launch optical power into 50/125 Ã-µm or 62.5/125 Ã-µm diameter multimode fibers. Model OPF670 comes with plastic lens cap for active alignment into connector receptacle, and Models OPF672 and OPF673 are equipped with...
Read More »TTI, Inc. and TT electronics OPTEK Technology Announce Franchise Agreement
OPTEK optoelectronic components now available through TTI, Inc... Carrollton, TX, October 19, 2010: Providing design engineers with a worldwide source for optoelectronic components, TT electronics OPTEK Technology has partnered with global distributor TTI, Inc. with a new franchise agreement. TTI now stocks and distributes OPTEK's comprehensive range of optoelectronic components, including...
Read More »
Infrared Optoelectronic Sensors feature digital logic output.
Featuring data rates to 250 kbaud, miniature OPL611 series photo light sensors consist of PhotologicÃ-® chip encapsulated in transparent molded plastic, providing optical coupling and mechanical protection. Sensors are available with buffer and inverter 10 K internal pull-up, open collector outputs, and direct TTL/LSTTL CMOS interface. Measuring 3 x 3 x 1 mm, surface mount units accept input...
Read More »
Fluid Sensors incorporate automatic calibration circuitry.
Used for detecting fluid presence in transparent tubing, OCB350 Series consists of LED and phototransistor packaged in opaque plastic housing that enhances ambient light rejection. It requires only optical device and power supply for operation, and included features minimize effects of changes in sensor's optics due to manufacturing variances, ambient light, temperature fluctuation, and...
Read More »OPTEK Receives Industry Leadership, Best Technology Awards from LED Journal
CARROLLTON, TX (January 29, 2008) -- TT electronics OPTEK Technology, a leading global manufacturer of LED components and arrays, has received two Innova Awards from LED Journal. OPTEK received first place in the categories of Best Technology and Industry Leadership for its 1-watt LED package and visible LED lab, respectively. OPTEK strives to contribute to the enhancement of technology in the...
Read More »OPTEK Partners with NRC Electronics for Worldwide Distribution of Product Offering
CARROLLTON, TX (December 5, 2007) - TT electronics OPTEK Technology has selected NRC Electronics as a global distributor of their complete product offering. Headquartered in Boca Raton, Florida, NRC Electronics will provide the necessary technical support and on demand distribution for OPTEK's optoelectronic sensors and fiber optic devices, along with their visible LED components and assemblies....
Read More »
Optek's LEDs Selected for Microchip Technology's Lighting Design Kit, Color-Control Software Solution and LED Driver
Tunable, full-color RGB; 1W and 10W LED devices exhibit efficiency, high reliability... CARROLLTON, TX (June 28, 2007) - TT electronics OPTEK Technology's 6-pin PLCC LED has been specified by Microchip Technology Inc.'s [NASDAQ: MCHP] LED Lighting Design Guide and designed for use with their color-control software solution; while OPTEK's 1W and 10W Lednium devices have been selected as part of a...
Read More »
LED Package suits both single use and array applications.
Measuring 6 x 6 mm with 1.5 mm height, Model OVS5WBCR4 0.5 W surface mount white LED package comes with water clear lens and 120Ã-
Read More »
Low Profile LED Package provides 130-
Designed for high current drive, surface mount Model OVSPRGBCR4 is composed of red, green, and blue LED with water clear lenses mounted on top of devices. Each color can be independently controlled, as well as programmed for color mixing. Typical luminous flux for red, green, and blue LEDs is 21l m, 32l m, and 7.5l m, with typical on-axis intensity of 7 cd, 11 cd, and 2.8 cd, respectively....
Read More »Optek's Visible LED Lab Accurately Evaluates LED Specifications, Reliability
NEW YORK, NY (May 8, 2007) - Providing lighting design engineers with a complete LED solution, from designing to manufacturing to testing, TT electronics OPTEK Technology's in-house visible LED laboratory features an array of equipment and other resources to accurately assess products ranging from single LEDs to complex power LED assemblies. According to Richard Saffa, vice president of OPTEK...
Read More »Optek Adds Allied Electronics, Inc. to Distributor Network
CARROLLTON, TX (February 12, 2007) - TT electronics OPTEK Technology has added Allied Electronics, Inc. to its North American distributor network. Established in 1928 and headquartered in Forth Worth, Texas, Allied Electronics, Inc. distributes a wide range of products, including active and passive components. Allied has many years of experience in the electronics industry, and we believe this...
Read More »