Adaconn

Universal Lockable Stop Plate
Architectural & Civil Engineering Products

Universal Lockable Stop Plate

INSERTA® introduces a Universal Ball Valve Lockable Stop Plate with improved clearance characteristics. These new Lockable Stop Plates allow INSERTA® Rotational Retainers and ADACONN® Adapters to be used directly with INSERTA® Ball Valves so equipped to clamp and retain them in compact and leak resistant assemblies against pumps, motors, actuators, filters, valves and...

Read More »
Steel Retaining Adapters suit fluid flow systems.
Electrical Equipment & Systems

Steel Retaining Adapters suit fluid flow systems.

INSERTA(TM) 4-Bolt Flange Rotational Retaining Adapters provide way to rotate flow plane 90°, allowing flow in horizontal and vertical planes. Design A provides clamp flange seal on face diameter and counter-bored thru holes from face 1 to face diameter for socket head clamping bolts. Design B has plain clamp face for applications that require this geometry. All adapters offer design...

Read More »
Modular Connectors target integrated hydraulic systems.
Construction Equipment and Supplies

Modular Connectors target integrated hydraulic systems.

Used in place of welded and threaded pipe fittings, INSERTA(TM) 4-bolt, Split Flange Connectors accommodate width of SAE Code 61 and Code 62 split clamp flanges. Design A incorporates 4-bolt clamp face groove and sealing O-ring. Design B eliminates 4-bolt clamp face groove and O-ring for those applications that require this geometry. Design C has all flat flange faces with 4-bolt holes tapped for...

Read More »
Check Valves feature external SAE threads.
Fluid & Gas Flow Equipment

Check Valves feature external SAE threads.

INSERTA(TM) ICT Thread-In Type Check Valves are all steel with hardened, lapped discs and seats, providing positive fluid shut off. Ranging in size from 5/16-3Â-½ in., units have cracking pressure from 3-90 psi with standard being 15 psi. Mounted in any position, valves feature max operating pressure of 5,000 psi and temperature range of -22 to 175°F. They can be inserted in manifolds,...

Read More »
Slip-In Check Valves eliminate external leak points.
Fluid & Gas Flow Equipment

Slip-In Check Valves eliminate external leak points.

ICS Slip-In Check Valves have compact design that controls flow in or out depending on how they are inserted into machined cavity. Also available with fixed orifice, valves feature steel construction and come with O-rings. Sizes from 1/8-3 in. have cracking pressure from 3-90 psi. Mounted in any position, max operating pressure is 5,000 psi, and temperature range is -22 to +175°F. Operating...

Read More »
Rotational Connectors help eliminate pipe leaks.
Construction Equipment and Supplies

Rotational Connectors help eliminate pipe leaks.

Made of steel, INSERTA(TM) 90° Flange Rotational Connectors range in size from 1/8-3 in. They are available with Code 61, Code U461, or Code 62 ports of same size. Models with different Codes or sizes of ports on connector are pressure-rated based on lower of 2 pressure-rated flange connectors. Code 61 connectors are used to connect Code 61 to Code 61 4-bolt flanges, while Code U461...

Read More »
Check Valve Bodies eliminate piping leaks.
Electrical Equipment & Systems

Check Valve Bodies eliminate piping leaks.

Featuring all steel construction, INSERTA(TM) ICFS Check Valve Bodies, Flange Type have support members that retain slip-in check valve in flange body together with required sealing O-rings. Products facilitate installation of same nominal size slip-in check valve or fixed orifice flow control valve in piping system that uses SAE 4-bolt flange patterns. Bodies accept INSERTA(TM) ICS Slip-in Type...

Read More »
Modular Connectors suit integrated hydraulic systems.
Construction Equipment and Supplies

Modular Connectors suit integrated hydraulic systems.

Used in place of welded and threaded pipe fittings, INSERTA(TM) Unified Code 61 2-Bolt Modular Connectors use upper right and lower left threaded holes of INSERTA(TM) Unified Code U61 4-Bolt port pattern. Design-A permits stacking of INSERTA(TM) inline modules with minimum of o-ring seals to eliminate leaks. Design-B eliminates 2-bolt clamp face groove and o-ring on face diameter. Design-C has...

Read More »
Blanking Plate facilitates assembly of modular valves.
Architectural & Civil Engineering Products

Blanking Plate facilitates assembly of modular valves.

INSERTA(TM) Blanking Plates are flange plates used to provide greater flexibility in assembly of INSERTA(TM) Modular Valves and Connectors, 4-Bolt Flange type. Plates are constructed with dome that induces stresses in plate greater than that of anticipated fluid's maximum opposing pressure stress. Dome is installed facing fluid side that is to become pressurized. Made of steel, plates range in...

Read More »
Universal Lockable Stop Plate
Architectural & Civil Engineering Products

Universal Lockable Stop Plate

INSERTA® introduces a Universal Ball Valve Lockable Stop Plate with improved clearance characteristics. These new Lockable Stop Plates allow INSERTA® Rotational Retainers and ADACONN® Adapters to be used directly with INSERTA® Ball Valves so equipped to clamp and retain them in compact and leak resistant assemblies against pumps, motors, actuators, filters, valves and...

Read More »
Steel Retaining Adapters suit fluid flow systems.
Electrical Equipment & Systems

Steel Retaining Adapters suit fluid flow systems.

INSERTA(TM) 4-Bolt Flange Rotational Retaining Adapters provide way to rotate flow plane 90°, allowing flow in horizontal and vertical planes. Design A provides clamp flange seal on face diameter and counter-bored thru holes from face 1 to face diameter for socket head clamping bolts. Design B has plain clamp face for applications that require this geometry. All adapters offer design...

Read More »
Modular Connectors target integrated hydraulic systems.
Construction Equipment and Supplies

Modular Connectors target integrated hydraulic systems.

Used in place of welded and threaded pipe fittings, INSERTA(TM) 4-bolt, Split Flange Connectors accommodate width of SAE Code 61 and Code 62 split clamp flanges. Design A incorporates 4-bolt clamp face groove and sealing O-ring. Design B eliminates 4-bolt clamp face groove and O-ring for those applications that require this geometry. Design C has all flat flange faces with 4-bolt holes tapped for...

Read More »
Check Valves feature external SAE threads.
Fluid & Gas Flow Equipment

Check Valves feature external SAE threads.

INSERTA(TM) ICT Thread-In Type Check Valves are all steel with hardened, lapped discs and seats, providing positive fluid shut off. Ranging in size from 5/16-3Â-½ in., units have cracking pressure from 3-90 psi with standard being 15 psi. Mounted in any position, valves feature max operating pressure of 5,000 psi and temperature range of -22 to 175°F. They can be inserted in manifolds,...

Read More »
Slip-In Check Valves eliminate external leak points.
Fluid & Gas Flow Equipment

Slip-In Check Valves eliminate external leak points.

ICS Slip-In Check Valves have compact design that controls flow in or out depending on how they are inserted into machined cavity. Also available with fixed orifice, valves feature steel construction and come with O-rings. Sizes from 1/8-3 in. have cracking pressure from 3-90 psi. Mounted in any position, max operating pressure is 5,000 psi, and temperature range is -22 to +175°F. Operating...

Read More »
Rotational Connectors help eliminate pipe leaks.
Construction Equipment and Supplies

Rotational Connectors help eliminate pipe leaks.

Made of steel, INSERTA(TM) 90° Flange Rotational Connectors range in size from 1/8-3 in. They are available with Code 61, Code U461, or Code 62 ports of same size. Models with different Codes or sizes of ports on connector are pressure-rated based on lower of 2 pressure-rated flange connectors. Code 61 connectors are used to connect Code 61 to Code 61 4-bolt flanges, while Code U461...

Read More »
Check Valve Bodies eliminate piping leaks.
Electrical Equipment & Systems

Check Valve Bodies eliminate piping leaks.

Featuring all steel construction, INSERTA(TM) ICFS Check Valve Bodies, Flange Type have support members that retain slip-in check valve in flange body together with required sealing O-rings. Products facilitate installation of same nominal size slip-in check valve or fixed orifice flow control valve in piping system that uses SAE 4-bolt flange patterns. Bodies accept INSERTA(TM) ICS Slip-in Type...

Read More »
Modular Connectors suit integrated hydraulic systems.
Construction Equipment and Supplies

Modular Connectors suit integrated hydraulic systems.

Used in place of welded and threaded pipe fittings, INSERTA(TM) Unified Code 61 2-Bolt Modular Connectors use upper right and lower left threaded holes of INSERTA(TM) Unified Code U61 4-Bolt port pattern. Design-A permits stacking of INSERTA(TM) inline modules with minimum of o-ring seals to eliminate leaks. Design-B eliminates 2-bolt clamp face groove and o-ring on face diameter. Design-C has...

Read More »
Blanking Plate facilitates assembly of modular valves.
Architectural & Civil Engineering Products

Blanking Plate facilitates assembly of modular valves.

INSERTA(TM) Blanking Plates are flange plates used to provide greater flexibility in assembly of INSERTA(TM) Modular Valves and Connectors, 4-Bolt Flange type. Plates are constructed with dome that induces stresses in plate greater than that of anticipated fluid's maximum opposing pressure stress. Dome is installed facing fluid side that is to become pressurized. Made of steel, plates range in...

Read More »

All Topics