Device Technologies, Inc.
Unit 8
Southborough, MA 01772-1033
Enclosure/Door Seal comes in broad range of profile shapes.
Enclosure and Door Seal protects critical electronic equipment from damaging environmental conditions such as dust, moisture, temperatures, and noise. It consists of profile shapes and sizes manufactured from stainless steel substrate and wire or segmented clip which snaps-on instantly to panel thickness from 0.74-19.1 mm, and locks into place without adhesives. Product suits rail, aviation,...
Read More »
Cable Tie Assembly has tamper-proof design.
Push-Mount(TM) Cable Tie assembly features low profile that prevents snagging when cable is trimmed and harness is pulled through bulkhead. Remaining terminal end falls below low profile receptacle, eliminating sharp edges. Push-Mount Wire Tie has 50 lb tensile strength rating and operates in temperatures from -40 to 185Ã-
Read More »Wire-Protection Grommets are custom cut.
Grommets are available in bulk packaging of factory pre-cut lengths, reducing waste and saving time of manual cut-off. Kits are suited for use on assembly lines to reduce scrap and increase throughput. They may also be shipped with products for customer end-use installation. All kit envelopes are printed to customer specifications.
Read More »Engineering Service provides custom design solutions.
Collaborative and custom design engineering service creates specialized wire protection, cable management, and fastening solutions. After confidential needs assessment, collected data is incorporated into usable design, which is then presented to customer for approval. Prototypes, once produced and evaluated for form, fitting, and functionality, are manufactured for use.
Read More »
Flexible Grommet protects cables from damage.
Spring-FastÃ-® Flexi-Grommet(TM) installs securely without adhesive on flanged openings in metal frames or housings. Made of spring-tempered stainless steel that is fusion bonded with thermosetting polymer resin, it protects cables from chafing in manufacturing and maintenance applications. It resists vibration, shock, immersion and salt spray, and is available for nominal sheet thicknesses...
Read More »Custom Seals Give OEMs The Best Fit & Performance
“Our customization service fills the gap when clients need a seal that falls outside normal parameters,” says Nick Petri, DTi president. https://www.thomasnet.com/insights/custom-seals-give-oems-the-best-fit-and-performance/
Read More »DTi Reveals How Lockheed Martin Could Save $6.5M on the F-35A
DTi Recommends Switching to FAA Approved Spring-Fast(R) Grommet Edging Southborough, MA November 25, 2019 – Device Technologies, Inc. (DTi), a leading manufacturer of wire protection solutions, revealed how Lockheed Martin could save a potential $6.5M by replacing all glued in nylon grommets (MS21266) on their F-35As with Spring-Fast Grommet Edging (M22529/2). The Pentagon’s Joint Program...
Read More »DTi to Showcase USA Produced Enhanced Manufacturing Solutions for Rail Industry at RSSI Minneapolis
DTi Grommets, Edge Seals and Trims are FST compliant and USA produced Southborough, MA September 20, 2019 – Device Technologies, Inc. (DTi), a leading manufacturer of wire protection solutions, will be featuring FST approved and USA produced solutions for rail industry OEMs at the 59th Annual Railway Systems Suppliers Inc. (RSSI) C&S Exhibition Sept 21-24, 2019, at the Minneapolis Convention...
Read More »DTi Announces Sikorsky Engineering Change
Sikorsky (SAC) Switches to DTi Spring-Fast® Grommet Edging for the Blackhawk UH-60M Southborough, MA February 13, 2019 – Device Technologies (DTi), a leading manufacturer of wire protection products, is pleased to announce that Sikorsky Aircraft Corporation (SAC), a division of Lockheed Martin, has executed an Engineering Change (EC) to use DTi’s Spring-Fast® M22529/2 grommet edging in...
Read More »Device Technologies Inc. Announces DB Roberts as New Distributor Partner
Alliance strengthens availability of DTi’s Best-In-Class Solutions for protecting critical equipment across North America. Southborough, MA, June 26th, 2017 - Device Technologies Inc. announced today that it has appointed DB Roberts as a distributor for its wire protection, cable management and enclosure sealing systems for select regions in North America. Established in 1982, DB Roberts is a...
Read More »Device Technologies Introduces New Critical Protection Catalog
High Performance Products Deliver Maximum Environment Benefits for Critical Electronic Equipment Protection Southborough, MA - January, 7 2011 - Device Technologies, Inc. announced the publication of its new catalog, with the latest additions to its successful Spring-Fast Wire Protection Grommet Edging and Fast-Drop Fiber Management family of enclosure products. RoHS compliant DTI enclosure...
Read More »Enclosure/Door Seal comes in broad range of profile shapes.
Enclosure and Door Seal protects critical electronic equipment from damaging environmental conditions such as dust, moisture, temperatures, and noise. It consists of profile shapes and sizes manufactured from stainless steel substrate and wire or segmented clip which snaps-on instantly to panel thickness from 0.74-19.1 mm, and locks into place without adhesives. Product suits rail, aviation,...
Read More »DTi Expands Its Ability to Deliver Leading Wire Protection Technology to Key Industries in Benelux Countries
Southborough, MA - Jan 30: Device Technologies, Inc., an ISO9001:2000 AS9100 B certified company, today announced a strategic partnership with Air-On Tooling, Inc. Rondostraat, Netherlands. This partnership will expand the consideration and use of DTi's proven technology by the Dutch and Belgian Armed forces, NATO facilities, as well as the Aerospace and Electronics industries in the Netherlands,...
Read More »New Linear Powder Coating Service in Device Technologies' New Expanded Facility
Southborough, MA - July 25, 2006 - Device Technologies, Inc., an ISO9001:2000 certified company, announces a new, unique service business for the powder coat finishing of wire, cable, metal strip, stampings and other linear, reel-to-reel products. Powder coatings can be applied to products for both functional and/or decorative purposes. A wide range of powder materials can be applied to...
Read More »
Cable Tie Assembly has tamper-proof design.
Push-Mount(TM) Cable Tie assembly features low profile that prevents snagging when cable is trimmed and harness is pulled through bulkhead. Remaining terminal end falls below low profile receptacle, eliminating sharp edges. Push-Mount Wire Tie has 50 lb tensile strength rating and operates in temperatures from -40 to 185Ã-
Read More »