Device Technologies, Inc.

Unit 8
Southborough, MA 01772-1033

New SL-FST Transit and Rail Series Ideal for Demanding Transit and Rail Applications
Protects wires, cables and tubing from abrasion. Eliminates installation adhesives and cleaning solutions while improving productivity. Provides resistance to abrasion, water absorption and low and high temperatures .
Read More »New Manufacturing Savings Model Allows Manufacturers to Enter 3 Data Points
Created to demonstrate the lower installed costs and increased productivity. Provides performance with 49% install cost savings and a 9.5x productivity gains.
Read More »
New Spring-Fast SL-FST Transit and Rail Series Provides Continuous Edge Protection
Saves 49% of the installation costs of grommets and glue because it locks on with finger pressure. Encapsulated in a flexible non-halogen, flame retardant, low smoke, low corrosive, and low toxic thermoplastic compound for added abrasion protection. Eliminates installation adhesives and cleaning solutions while improving productivity.
Read More »
DTi Wire Protection Grommet Edging Now Meets European Rail Standard EN 45545-2
DTi’s new SL-FST material takes the heat from fire protection requirements in rail industry Southborough, MA May 16, 2018 – Device Technologies, Inc. (DTi), a leader in the design and manufacture of enclosure related and environmental protection components, has announced that its Spring-Fast® SL-FST Transit and Rail Series wire protection grommet edging meets and complies with the rigorous...
Read More »
New ADS-B Wire Protection Install Kit Helps MROs to Lower Cycle Time
The DTI’s ADS-B Wire Protection Install Kit consists of 12 ft Spring-Fast® M22529/2 grommet, 12 ft PFA-PFW- 1-1/4 in. braided wrap wire sleeving, one pair of 830 PS full bypass shears and 860 GSB cut to length bench mount measuring scale. The ADS-B utilizes satellites to determine aircraft location. This kit helps MRO service centers and aircraft owners to protect critical wires and to reduce...
Read More »DTi Seals and Trim Approved by UL as Recognized Components
EPDM rubber trims and edge seals certified to rigorous UL50 and UL50E standards Southborough, MA — Device Technologies, Inc. (DTi), a leader in the design and manufacture of enclosure related and environmental protection components, announced today that Underwriters Labs (UL) has approved its Seal-Fast™ Door Seals and Trim-Fast™ Edge Trim for EPDM gasketing materials to the stringent UL50...
Read More »DTI Exhibits The Power of Protection @ Power-Gen International 2014
SOUTHBOROUGH, MA – Lean, Mean Green is how Device Technologies, Inc. (DTi) has approached electronics and power system protection for over 30 years since we introduced the Spring-Fast-® High Performance Grommet Edging in 1984. This product line installs quickly, lowering installed costs, holds fast and meets severe vibration environments associated with Telcordia earthquake and related...
Read More »Device Technologies on the Fast Track with Two New Collaborative FEA (CFEA(TM)) Rail Solutions
Southborough, MA – With today’s CFEA technology, we can model and evaluate a design in hours or even minutes, thereby minimizing critical lead times and overall production costs.- DTI invested in systems and technology that support this design cycle requirement. This past year, DTI leveraged its FEA capabilities to help develop not one, but two new rail sealing solution requirements, for...
Read More »Device Technologies, Inc. Launches NEW Spring-Fast® Tools and Kit to Facilitate the Fit of FAA Approved Spring-Fast® Grommet Edging
Washington DC, - Device Technologies, Inc. (DTi) announced today at the Annual Aircraft Electronics Association convention (www.aea.net ) new tool offerings for improved and expanded application opportunities of the FAA Approved and IFE Standard per ARINC 628, p5, Spring-Fast grommet edging technology, an industry accepted grommet edging material that simply locks on with finger pressure in...
Read More »Eurofighter Typhoon Combat Aircraft Upgrades to Device Technologies, Inc.'s NEW Spring-Fast® Wire Protection SL Aero Series Wire Protection System
Southborough, Mass - Eurofighter Typhoon combat aircraft built in the program's third production batch (Tranche 3) will be equipped with Device Technologies, Inc. NEW SL Aero Series grommet edging system for protection against dangerous wire and cable wear. The Tranche 3 Typhoons are to carry Device Technologies, Inc.'s Spring-Fast-® SL Series grommet edging, which will be installed around...
Read More »DTi Reveals How Lockheed Martin Could Save $6.5M on the F-35A
DTi Recommends Switching to FAA Approved Spring-Fast(R) Grommet Edging Southborough, MA November 25, 2019 – Device Technologies, Inc. (DTi), a leading manufacturer of wire protection solutions, revealed how Lockheed Martin could save a potential $6.5M by replacing all glued in nylon grommets (MS21266) on their F-35As with Spring-Fast Grommet Edging (M22529/2). The Pentagon’s Joint Program...
Read More »DTi to Showcase USA Produced Enhanced Manufacturing Solutions for Rail Industry at RSSI Minneapolis
DTi Grommets, Edge Seals and Trims are FST compliant and USA produced Southborough, MA September 20, 2019 – Device Technologies, Inc. (DTi), a leading manufacturer of wire protection solutions, will be featuring FST approved and USA produced solutions for rail industry OEMs at the 59th Annual Railway Systems Suppliers Inc. (RSSI) C&S Exhibition Sept 21-24, 2019, at the Minneapolis Convention...
Read More »
New SL-FST Transit and Rail Series Ideal for Demanding Transit and Rail Applications
Protects wires, cables and tubing from abrasion. Eliminates installation adhesives and cleaning solutions while improving productivity. Provides resistance to abrasion, water absorption and low and high temperatures .
Read More »New Manufacturing Savings Model Allows Manufacturers to Enter 3 Data Points
Created to demonstrate the lower installed costs and increased productivity. Provides performance with 49% install cost savings and a 9.5x productivity gains.
Read More »
New Spring-Fast SL-FST Transit and Rail Series Provides Continuous Edge Protection
Saves 49% of the installation costs of grommets and glue because it locks on with finger pressure. Encapsulated in a flexible non-halogen, flame retardant, low smoke, low corrosive, and low toxic thermoplastic compound for added abrasion protection. Eliminates installation adhesives and cleaning solutions while improving productivity.
Read More »DTi Announces Sikorsky Engineering Change
Sikorsky (SAC) Switches to DTi Spring-Fast® Grommet Edging for the Blackhawk UH-60M Southborough, MA February 13, 2019 – Device Technologies (DTi), a leading manufacturer of wire protection products, is pleased to announce that Sikorsky Aircraft Corporation (SAC), a division of Lockheed Martin, has executed an Engineering Change (EC) to use DTi’s Spring-Fast® M22529/2 grommet edging in...
Read More »
DTi Wire Protection Grommet Edging Now Meets European Rail Standard EN 45545-2
DTi’s new SL-FST material takes the heat from fire protection requirements in rail industry Southborough, MA May 16, 2018 – Device Technologies, Inc. (DTi), a leader in the design and manufacture of enclosure related and environmental protection components, has announced that its Spring-Fast® SL-FST Transit and Rail Series wire protection grommet edging meets and complies with the rigorous...
Read More »
New ADS-B Wire Protection Install Kit Helps MROs to Lower Cycle Time
The DTI’s ADS-B Wire Protection Install Kit consists of 12 ft Spring-Fast® M22529/2 grommet, 12 ft PFA-PFW- 1-1/4 in. braided wrap wire sleeving, one pair of 830 PS full bypass shears and 860 GSB cut to length bench mount measuring scale. The ADS-B utilizes satellites to determine aircraft location. This kit helps MRO service centers and aircraft owners to protect critical wires and to reduce...
Read More »Device Technologies Inc. Announces DB Roberts as New Distributor Partner
Alliance strengthens availability of DTi’s Best-In-Class Solutions for protecting critical equipment across North America. Southborough, MA, June 26th, 2017 - Device Technologies Inc. announced today that it has appointed DB Roberts as a distributor for its wire protection, cable management and enclosure sealing systems for select regions in North America. Established in 1982, DB Roberts is a...
Read More »DTi Seals and Trim Approved by UL as Recognized Components
EPDM rubber trims and edge seals certified to rigorous UL50 and UL50E standards Southborough, MA — Device Technologies, Inc. (DTi), a leader in the design and manufacture of enclosure related and environmental protection components, announced today that Underwriters Labs (UL) has approved its Seal-Fast™ Door Seals and Trim-Fast™ Edge Trim for EPDM gasketing materials to the stringent UL50...
Read More »