Lumitex
Strongsville, OH 44136
Share:
Fiber Optic Illuminator assists orthopedic surgeons.
Comprised of flexible acrylic fiber optic panel that adheres to retractors, Ortho-Light(TM) delivers bright, shadowless, continuous area light, optimizing visualization in small-incision hip, shoulder, or knee surgeries. Disposable, single-use device is sterile and latex-free. Unit attaches to retractor using biocompatible, 2-sided adhesive and inserts directly into surgical cavity.
Read More »
Lumitex® California-Based R&D Center Offers Optical Fiber Illumination Technologies with Volume Manufacturing from Asia
Irvine, CA, May, 2009 - Lumitex-®, Inc. announces the establishment of its West Coast R&D Center in Irvine, California, and Asian manufacturing center in Taipei, Taiwan to help develop, apply and produce illumination solutions using patented LED and fiber optic technologies for electronics applications on the West Coast and in Asia. Lumitex West, formerly Poly-Optical Products, provides...
Read More »Surgical Lamp offers high-intensity light in compact package.
Available in 5.8 x 3.5 x 2.8 in. portable package weighing 2.2 lb, LumitexMD(TM) BRICK medical grade light source uses 24 W Solarc-® high-intensity arc lamp to provide white light for surgical site visualization. Unit comes with ACMI connector, common international power plugs, and mounting clamp for attachment to IV pole or surgical table accessory side rail. Light source can be used in...
Read More »
Single-Use Surgical Device has multifunctional design.
VersaLight-® brings together suction, pushbutton-controlled irrigation, retraction, and light. Using existing OR light sources, unit produces uniform, cool, shadowless spot light that aids visualization in deep cavity surgery. Relief holes increase suction effectiveness and allow surgeons to wipe tissue dry while preventing tissue grab. Also included, cable management system features spiral...
Read More »
New Lumitex® Fiber Optic Illumination Technologies Solve Design Challenges for Membrane Switch & Other Applications
Strongsville, OH, February 2007 - Lumitex, Inc., the leading innovator in fiber optic backlighting and illumination, has introduced a family of patented new technologies that enable designers to backlight or illuminate areas that have previously been problematic or unreachable. The new technologies are an extension of Lumitex's patented ultra-thin, extraordinarily flexible and extremely versatile...
Read More »Versatile Fiber Optic Backlights Can Handle Membrane Switches With Irregular Geometries
Strongsville, OH, June 2006 - UniGlo-® patented fiber optic backlighting technology from Lumitex-® can be designed to provide bright, uniform, low-power, low-cost backlighting for membrane switch OEMs who require irregular geometries. Traditional membrane switches have been rectangular in shape, but some OEMs have been designing membrane switches with other, more unusual shapes to help...
Read More »Fiber Optic Panels provide uniform backlight solution.
Utilizing single 5 mm LED light source, Woven Fiber Optic(TM) panels provide backlighting solution for monochrome LCD displays in digital pressure test gauges operating in low- to mid-ambient light environments. Products deliver uniform illumination with no hot spots and can be customized with choice of colors. Use of panels has no adverse effect on sensitive, internal analog components. They...
Read More »
Optical Fiber Panels feature white LEDs.
Equipped with true white backlight, UniGlo-® Optima-® panels offers brightness as high as 75 ft-L, depending on panel size and configuration. They require no inverter and generate no heat or EMI. Power consumption is typically 3.6 V, 20-30 mA, with operating temperature of -40 to +85-ºC. With thin profile of 0.013 in., panels can be placed between elastomeric keypad or overlay and non-tactile...
Read More »
Modular Light Engines utilize LEDs and fiber optic panels.
LED Light Engines combine one or more high-brightness LEDs with Lumitex-® woven or UniGlo-® fiber optic panel to spread light source over wide, flat area. Collimating lens captures and focuses light from LED(s) to fiber optic panel. Encased in aluminum housing, assembly achieves typical brightness of 100 Ft-L or more for 3 x 5 in. fiber optic panel illuminated by one LED. Luxeon-® LEDs provide...
Read More »
Fiber Optic Backlight offers brightness of 30 ft-L.
UniGlo-® Optima(TM) fiber optic backlight panel is 0.013 in. thick and requires no inverter, generates no heat or EMI, and provides lifetime of 100,000 hours. Power consumption is typically 3.6 V, 20-30 mA. Backlight has pre-selected die cut holes through back-reflector which accommodate visual spot for indicator lights. Panel suits backlighting of LCDs, membrane switches, silicon rubber...
Read More »
Fiber Optic Illuminator assists orthopedic surgeons.
Comprised of flexible acrylic fiber optic panel that adheres to retractors, Ortho-Light(TM) delivers bright, shadowless, continuous area light, optimizing visualization in small-incision hip, shoulder, or knee surgeries. Disposable, single-use device is sterile and latex-free. Unit attaches to retractor using biocompatible, 2-sided adhesive and inserts directly into surgical cavity.
Read More »
Lumitex® California-Based R&D Center Offers Optical Fiber Illumination Technologies with Volume Manufacturing from Asia
Irvine, CA, May, 2009 - Lumitex-®, Inc. announces the establishment of its West Coast R&D Center in Irvine, California, and Asian manufacturing center in Taipei, Taiwan to help develop, apply and produce illumination solutions using patented LED and fiber optic technologies for electronics applications on the West Coast and in Asia. Lumitex West, formerly Poly-Optical Products, provides...
Read More »Surgical Lamp offers high-intensity light in compact package.
Available in 5.8 x 3.5 x 2.8 in. portable package weighing 2.2 lb, LumitexMD(TM) BRICK medical grade light source uses 24 W Solarc-® high-intensity arc lamp to provide white light for surgical site visualization. Unit comes with ACMI connector, common international power plugs, and mounting clamp for attachment to IV pole or surgical table accessory side rail. Light source can be used in...
Read More »
Single-Use Surgical Device has multifunctional design.
VersaLight-® brings together suction, pushbutton-controlled irrigation, retraction, and light. Using existing OR light sources, unit produces uniform, cool, shadowless spot light that aids visualization in deep cavity surgery. Relief holes increase suction effectiveness and allow surgeons to wipe tissue dry while preventing tissue grab. Also included, cable management system features spiral...
Read More »
New Lumitex® Fiber Optic Illumination Technologies Solve Design Challenges for Membrane Switch & Other Applications
Strongsville, OH, February 2007 - Lumitex, Inc., the leading innovator in fiber optic backlighting and illumination, has introduced a family of patented new technologies that enable designers to backlight or illuminate areas that have previously been problematic or unreachable. The new technologies are an extension of Lumitex's patented ultra-thin, extraordinarily flexible and extremely versatile...
Read More »Versatile Fiber Optic Backlights Can Handle Membrane Switches With Irregular Geometries
Strongsville, OH, June 2006 - UniGlo-® patented fiber optic backlighting technology from Lumitex-® can be designed to provide bright, uniform, low-power, low-cost backlighting for membrane switch OEMs who require irregular geometries. Traditional membrane switches have been rectangular in shape, but some OEMs have been designing membrane switches with other, more unusual shapes to help...
Read More »Fiber Optic Panels provide uniform backlight solution.
Utilizing single 5 mm LED light source, Woven Fiber Optic(TM) panels provide backlighting solution for monochrome LCD displays in digital pressure test gauges operating in low- to mid-ambient light environments. Products deliver uniform illumination with no hot spots and can be customized with choice of colors. Use of panels has no adverse effect on sensitive, internal analog components. They...
Read More »
Optical Fiber Panels feature white LEDs.
Equipped with true white backlight, UniGlo-® Optima-® panels offers brightness as high as 75 ft-L, depending on panel size and configuration. They require no inverter and generate no heat or EMI. Power consumption is typically 3.6 V, 20-30 mA, with operating temperature of -40 to +85-ºC. With thin profile of 0.013 in., panels can be placed between elastomeric keypad or overlay and non-tactile...
Read More »
Modular Light Engines utilize LEDs and fiber optic panels.
LED Light Engines combine one or more high-brightness LEDs with Lumitex-® woven or UniGlo-® fiber optic panel to spread light source over wide, flat area. Collimating lens captures and focuses light from LED(s) to fiber optic panel. Encased in aluminum housing, assembly achieves typical brightness of 100 Ft-L or more for 3 x 5 in. fiber optic panel illuminated by one LED. Luxeon-® LEDs provide...
Read More »
Fiber Optic Backlight offers brightness of 30 ft-L.
UniGlo-® Optima(TM) fiber optic backlight panel is 0.013 in. thick and requires no inverter, generates no heat or EMI, and provides lifetime of 100,000 hours. Power consumption is typically 3.6 V, 20-30 mA. Backlight has pre-selected die cut holes through back-reflector which accommodate visual spot for indicator lights. Panel suits backlighting of LCDs, membrane switches, silicon rubber...
Read More »