SCHURTER Electronic Components

Power Entry Module is designed for PCB mounting.
Controls & Controllers

Power Entry Module is designed for PCB mounting.

Featuring built-in overload protection, maximum high power density, and EMC filter performance, series DA22 is rated for currents up to 10 A at 125/250 Vac. It is pre-wired between inlet and fuseholder, eliminating wiring of these components and minimizing assembly time with direct mounting to PCB. Filter and shielding are incorporated directly at point of entry, while overload protection is...

Read More »
SMD Fuse with Clips offers primary/secondary protection.
Electrical Equipment & Systems

SMD Fuse with Clips offers primary/secondary protection.

Model UMZ 250 Universal Modular Fuse and fuseholder combination features gold-plated caps for reflow soldering to PCB. Providing overcurrent circuit protection, compact, leadless unit offers low profile for maximized production speed. Current ratings range from 315 mA to 4 A, with voltage ratings of 250 Vac and 125 Vdc according to IEC and 277 Vac and 250 Vdc to UL. Unit opens according to IEC...

Read More »
Power Entry Modules mount in tight spaces.
Controls & Controllers

Power Entry Modules mount in tight spaces.

Providing overcurrent protection up to 20 A, Series 6135 offers C14 appliance inlet, while Series 6136 features C20 inlet, according to IEC 60320. Both provide snap-in mounting and are equipped with thermal positively trip-free release circuit breaker. Series 6135 features 2-pole switch with or without 1- or 2-pole overcurrent protection, while 6136 is offered in 1-pole with switch only or switch...

Read More »
Chemicals & Gases

Circuit Breakers provide 50,000 switching cycles under load.

Available in 1-, 2-, or 3-pole versions and 5 illuminated rocker colors, TA35 Series features extended operating temperature of -30 to +60°C and conditional short circuit Inc of 2,000 A. Units combine switching and thermal overload protection over current range of 0.05-20 A for 1- and 2-pole types, and 0.05-12 A for 3-pole version. Dead Man Switch remains ON while actuator is depressed, and...

Read More »
Chip Fuse offers current protection up to 25 A.
Electrical Equipment & Systems

Chip Fuse offers current protection up to 25 A.

Featuring 1206 footprint, UST 1206 is suited for applications in which high inrush current and on-off cycling are present. It offers current ratings of 7-25 A, voltage ratings up to 63 Vdc and 32 Vac, breaking capacity of up to 400 A at defined voltage, and operating temperature range of -55 to +90°C. UL 248-14 and cURus approved fuse is supplied on tape and reel either with 1, 5, or 15 k...

Read More »

The UMT 250 Offers More Versatility with Extended Current Ratings
Controls & Controllers

The UMT 250 Offers More Versatility with Extended Current Ratings

One SMD fuse for use in both primary and secondary circuits streamlines processes Santa Rosa, California, August 6, 2008 - Schurter announces several new current ratings to its already popular UMT 250 series, for a total of twenty two unique ratings from 80mA to 10A. The series is designed to provide overcurrent and short-circuit protection in both primary and secondary circuits. The versatile...

Read More »
Piezo Switches meet IP69K seal-tight protection class.
Electrical Equipment & Systems

Piezo Switches meet IP69K seal-tight protection class.

Able to withstand qualification test according to IEC 60529, PSE Series offers more than 20 million switching cycles. Units contain no moving parts and are manufactured with stainless steel or aluminum housings. Available in mounting diameters of 16, 19, 22, 24, 27, and 30 mm, switches are hermetically sealed, making them suited for applications exposed to high levels of dirt and grime, and...

Read More »
Filtered Inlet is safety-approved for AC applications.

Filtered Inlet is safety-approved for AC applications.

Providing universal EMC for high-frequency applications, Series 5150 possesses broadband suppression properties to 1 GHz and combines them with universal power input. It uses X2Y® filter technology, which combines X and Y capacitors into one component to eliminate leads connecting capacitors as well as minimize parasitic impedances. Double shielding between X2Y filter and filter casing, together...

Read More »

Power Filters are optimized for DC applications.

Particularly suited for applications requiring increased attenuation of asymmetric disturbances, FMEB and FMEC series have current rating of 30 A @ 80 Vdc and aluminum housing that is potted and has metal flanges for secure mounting to chassis. Single polarity FMEB filter is designed for max operating voltage of 80 Vdc, while FMEC series offers connections for 2 polarities for 80+ Vdc max. Input...

Read More »
Controls & Controllers

DC Power Entry Module is suited for 48 V telecom equipment.

Series 5003 ECO includes screw mount version for front or rear mounting to chassis as well as snap-in version that features AMP Universal MATE-N-LOK and Molex HCS-125 connectors encased with single stage filter rated up to 15 A at 125 Vdc. EMI filter provides wideband attenuation in frequencies ranging from 100 kHz to 30 MHz. Offered in lightweight and environmentally friendly compact package, dc...

Read More »

All Topics