SCHURTER Electronic Components

Compact Power Connector Is Now V-Lock Compatible
Construction Equipment and Supplies

Compact Power Connector Is Now V-Lock Compatible

SCHURTER'S popular KEA series provides simple and cost effective cord retaining solution Santa Rosa, California – SCHURTER is pleased to announce, that its compact KEA series power entry module, with 1- or 2-pole fuseholder, now mates with V-Lock cord sets. The KEA's new V-Lock compatible feature prevents unintended disconnection of the power from the equipment. Unlike wire bail or clamp...

Read More »
Seal Kit gives cord connector/inlet connection IP54 protection.
Adhesives & Sealants

Seal Kit gives cord connector/inlet connection IP54 protection.

Available for 5707 series power entry module, seal kit provides IP54 rating between inlet and cord connector as toÂ- prevent dust or splashing water from entering between them when equipment is plugged in. Independent testing laboratories have examined and confirmed reliability of sealing kit according to IEC 60529. To ensure tightness of IP54 with these sealed versions in actual use, safety...

Read More »
Components Approved for Use in Unattended Household Appliances
Architectural & Civil Engineering Products

Components Approved for Use in Unattended Household Appliances

Insulation materials meet additional glow wire tests as outlined in IEC 60335-1, 4th edition Santa Rosa, California — SCHURTER is pleased to announce an assortment of its most popular components for use in unattended household appliances, according to IEC 60335-1, 4th edition. Experience has shown that unattended appliances in particular tend to self-ignite when components fail, causing fires...

Read More »
EMC Filter rids noise in high-power inverters.
Electronic Components & Devices

EMC Filter rids noise in high-power inverters.

With rated current ranging from 150–2,500 A at 520 or 760 V, FMCC SOL is designed for high attenuation of electromagnetic interference in 3-phase systems. UL-approved unit complements existing FMER SOL DC filter for use in inverters where both AC and DC lines require filtering, such as those used for photovoltaic and wind harvesting systems. FMCC SOL is also suited for solo use in 3-phase...

Read More »
SMD Fuse offers 14 rated currents from 500 mA to 10 A.
Electrical Equipment & Systems

SMD Fuse offers 14 rated currents from 500 mA to 10 A.

Suitable for voltages up to 250 Vac and 125 Vdc, quick-acting Model UMF 250 provides over current and short circuit protection in primary and secondary circuits. Unit features breaking capacity up to 200 A at rated voltage. Measuring 3 x 10.1 mm, surface mount fuse offers alternative to traditional 5 x 20 mm cartridge fuses. Halogen-free device is RoHS-compliant and suited for power supplies,...

Read More »
SMD Fuse offers 1,500 A breaking capacity at 277 Vac/250 Vdc.
Electrical Equipment & Systems

SMD Fuse offers 1,500 A breaking capacity at 277 Vac/250 Vdc.

Designed for applications whereÂ- cartridge fuse is used, UMT-H Universal Modular Fuse is offered with 6 rated currents from 160 mA to 2 A. Dimensions of 5.3 x 16 mm help conserve board space compared to 5 x 20 mm cartridge fuses to allow for downsizing, while position of device markings makes key information – approvals, current rating, and voltages – immediately...

Read More »
IEC Appliance Inlet secures power components to PCBs.
Electrical Equipment & Systems

IEC Appliance Inlet secures power components to PCBs.

Compact GSP4, IEC C20 appliance inlet features PCB terminals for L, N, and E and 6.3 x 0.8 mm quick connect or solder tab for additional grounding to chassis. Unit is snapped in or screwed on to PCB before soldering. Included stabilizing posts absorb withdrawal and insertion force. Unit carries ENEC and CCC approvals for 16A / 250 Vac, is UL approved for 20 A/250 Vac, and is CSA approved for 18...

Read More »
Metal Pushbutton Switch offers white ring and point illumination.
Electrical Equipment & Systems

Metal Pushbutton Switch offers white ring and point illumination.

Available with integrated 5, 12, and 24 V resistor options, MSM series offers white illumination to supplement existing red, green, yellow, and blue options. Construction includesÂ- stainless steel housing and actuator, with micro switch snapped into housing with 19, 22, or 30 mm mounting diameter. Switching voltage ratings range from 5 Vdc to 250 Vac, and current...

Read More »
IEC Appliance Outlet with IDC Terminals accepts 14 gauge wire.
Construction Equipment and Supplies

IEC Appliance Outlet with IDC Terminals accepts 14 gauge wire.

Suited for use in PDUs and other equipment where multiple outlets are banked in series, 6610 appliance outletÂ- lets wires be bussed across terminals and thereby connect common terminals simultaneously. IDC terminals are arranged either along or across connector pin axis, allowing for horizontal or vertical mounting orientation. Wires are pressed into place with protective...

Read More »
Versatile Power Entry Module Now Offered with Custom Wires
Controls & Controllers

Versatile Power Entry Module Now Offered with Custom Wires

SCHURTER KFA series can be custom fitted with wire harness Santa Rosa, California – SCHURTER's KFA power entry module with IEC C14 inlet, EMC filter, fuseholder and optional voltage selector, can now be supplied with custom wiring for optimized cost, integration, and speed of assembly. The KFA is available with standard or medical filters in rated currents of 1, 2, 4, 6 and 10A at 125/250 VAC...

Read More »

All Topics