SCHURTER Electronic Components

High Voltage Fuse offers overcurrent protection to 500 Vac.
Electrical Equipment & Systems

High Voltage Fuse offers overcurrent protection to 500 Vac.

With breaking capacity of 1,500 A at rated voltage, Series SHT 6.3 x 32 mm Fuse safeguards electronic systems and operators in event of catastrophic short circuit incident. Unit is available in 10 rated currents ranging from 1-8 A. In addition to panel or board mount clips and holders, fuse is available with pigtail leads for direct mounting to PCB. RoHS-compliant device, operating from -40 to...

Read More »
Heavy-Duty Clip accommodates high-voltage fuses.
Fasteners & Hardware

Heavy-Duty Clip accommodates high-voltage fuses.

Intended for use with 38 x 10.3 mm dia or 85 x 10.3 mm dia fuses, RoHS-compliant and cURus-approved CSO clip is rated for applications with voltages to 1,500 V AC/DC and currents to 32 A. Characteristics meet/exceed need for PV system voltages, and copper alloy and clamping force lend to minimal power loss. While solder type version allows direct mounting on PCB via through-hole technology,...

Read More »
Spacers/Standoffs have rugged, insulating design.
Fasteners & Hardware

Spacers/Standoffs have rugged, insulating design.

Made of studs and inserts molded in nylon body, Transipillars provide durable, insulated spacer system for board-to-board stacking or board-to-chassis mounting. Studs and inserts, made of galvanized steel and brass, are available in stud/stud, stud/insert, or insert/insert configurations with cylindrical or hexagonal body form. Pillar come in 13-64 mm lengths and can also be customized. Voltage...

Read More »
Quick-Acting Fuse has compact, surface mount design.
Electrical Equipment & Systems

Quick-Acting Fuse has compact, surface mount design.

With quick-acting characteristic according to IEC 60127-4, surface-mount UMF 250 provides overcurrent and short circuit protection for electronic systems in primary and secondary circuits. This Universal Modular Fuse carries current ratings up to 10 A at 250 Vac/125 Vdc and provides breaking capacity of up to 200 A at rated voltage. Featuring cURus and VDE approvals, RoHS-compliant product suits...

Read More »

Schurter Touts Broad Range of Standard EMC Filters

Schurter Touts Broad Range of Standard EMC Filters

Santa Rosa, California, May 6, 2011 - Schurter recently added several new filters to its already extensive EMC product line. The expansive filter line comes in a wide variety of sizes, shapes, mounting and connection options, as well as varying performance characteristics for meeting all types of application requirements. The Schurter selection of discrete line filters are offered with features...

Read More »
EMI Line Filters come in 3 design configurations.
Electronic Components & Devices

EMI Line Filters come in 3 design configurations.

Intended for 1-phase systems, Series FMBB NEO is characterized by high symmetrical and asymmetrical attenuation. Design C attenuates potentially strong conducted interferences, while Design D is laid-out for attenuation of high frequency interferences, and Design F is suited for low frequency noise attenuation. Family is rated 1-36 A, according to IEC and 125/250 Vac, 1-30 A according to UL/CSA....

Read More »
Sine Wave Output Filters target motor applications up to 500 Vac.

Sine Wave Output Filters target motor applications up to 500 Vac.

Series FMAC SINE, 3-phase sine wave output filters are optimized for motor cables up to 200 m, while FMAC SINE DCL filters accomodate motor cables up to 1,000 m. They both convert output voltage wave forms produced by PWM frequency converters into low-distortion sine wave forms for motor and power transformation applications. Rated for currents from 4-16 A, they are suited for motors with power...

Read More »
Power Cords latch into IEC connectors and power entry modules.
Electrical Equipment & Systems

Power Cords latch into IEC connectors and power entry modules.

Offering solution for 10 A and 16 A appliance couplers and power entry modules, according to IEC 60320, V-Lock Cord Retaining System latches into notched inlet or outlet to prevent accidental disconnection of power from equipment. Cord sets are available with NEMA plugs and variety of country-specific plugs. Applications include medical devices, laboratory equipment, and power distribution units...

Read More »
Circuit Breaker Switch integrates undervoltage protection.
Chemicals & Gases

Circuit Breaker Switch integrates undervoltage protection.

Comprised of 2-pole appliance switches with built-in undervoltage trip release, UP1 series prevents uncontrolled restarts by monitoring and tripping under conditions of extreme voltage drop or when supply voltage is interrupted. Manual switch to On position is required, preventing harmful situations for operators, and others in surrounding work area. Pushbutton version offers snap-in and screw-on...

Read More »
Electrical Equipment & Systems

Metal Switches are available with colored housing.

MSM metal switches are available with color-anodized aluminum housing. Red and green signal colors provide optical accentuation to switching functions, and aluminum version is characterized by IK07 protection class as well as optimized impact strength. Along with IP67 protection, vandal-proof switches offer various contact types to cover 30 Vdc to 250 Vac range for admissible switching voltage...

Read More »

All Topics