SCHURTER Electronic Components

Fused Outlet maintains uninterrupted power supply.
Construction Equipment and Supplies

Fused Outlet maintains uninterrupted power supply.

Type 4719 shuttered outlet contains integrated fuseholder and neon indicator. Fuse blows in event equipment supplied by outlet fails. Unit continues to supply uninterrupted power safely to other remaining outlets in strip, while neon light associated with affected outlet indicates power failure. Fuseholder for 5 x 20 mm fuses is shockproof PC2 and is rated IP65. Outlet is recognized by cURus and...

Read More »
Snap-In AC Inlet is rated 20 A/250 V.
Construction Equipment and Supplies

Snap-In AC Inlet is rated 20 A/250 V.

Model 4793 is offered in several versions to suit panel thicknesses from 1 to 3 mm, with 6.3 mm quick-fit terminals or solder tabs. Body is made from UL94-V0 thermoplastic, and contact pins and terminals are bright electro-tin plated brass for low resistance. Inlet is designed to comply with EN 60320-1/C20 for Class I cold condition. It is approved at cURus 250 V/20 A and VDE 250 V/16 A.

Read More »
Power Entry Module offers built-in RFI filter.
Controls & Controllers

Power Entry Module offers built-in RFI filter.

EC Series combines integrated on/off switch and ac receptacle built to IEC/EN 60320-1/C20 specs. Recessed, 2-pole switch protects against accidental actuation. In-rush rating is 100 A for 5-6 msec. Module is UL and CSA approved for up to 20 A at 125 and 250 V, and VDE approved for up to 16 A at 250 V. Type EC12 filtered version meets standard and medical grade attenuation requirements. Filter...

Read More »
Ganged Outlet distributes computer system power.
Construction Equipment and Supplies

Ganged Outlet distributes computer system power.

Quadbloc+2 Type 4758 has 4 ganged IEC F outlets and frame, into which company's Type KEB1 switch/inlet, Type 6200 fused inlet, or Type 6220 double fused inlet can be snapped. Busbar of Quadbloc+2 is available with 6.3 mm quick-connect tabs, solder tabs, or combination thereof. Rear is housed in black plastic cover that protects from accidental contact. For mounting, entire unit snaps into panel...

Read More »
Power Entry Module exceeds power limits.
Chemicals & Gases

Power Entry Module exceeds power limits.

EF Series includes AC inlet and circuit breaker, UL rated up to 20 A at 250 V. Circuit breaker provides manual reset of circuit and status indication depending on switch position (I/O). It is recessed in flange to protect against inadvertent actuation. Filter options meet standard and medical grade attenuation requirements at 12, 16, and 20 A. Direct electrical contact of filter to chassis...

Read More »
Fused Inlet is VDE and cURus approved.
Architectural & Civil Engineering Products

Fused Inlet is VDE and cURus approved.

Series 4707 Fused Inlet is available with single or double pole slotted screw type fuseholders for 5 x 20 mm fuses. Rated at 250 V at 10 A, inlet includes 2 fuseholders rated to IP65. Classed as PC2 (IEC/EN 60127-6), fuseholders guard against accidental shock when fuses are changed. Maximum power acceptance is 2 x 1.6 W, and wire terminations are 6.3mm quick-connects or solder. Inlet complies...

Read More »
Fuseblock facilitates installation in SMD automation.
Architectural & Civil Engineering Products

Fuseblock facilitates installation in SMD automation.

OGN-SMD fuseblock can be surface mounted with 5x20 mm pre-loaded fuses, eliminating need for mounting block, fuses, and cover in separate steps. Heat-resistant UL 94 V-0 plastic withstands heat of vapor phase and reflow soldering. Fuseblock is rated to 10A/250V. Rated power acceptance at ambient air temperature, with or without reflow cover, is 4W; with transparent cover, 2.5W. Pin spacings of...

Read More »
Cord Connector allows hot swaps and streamlines wiring.
Electrical Equipment & Systems

Cord Connector allows hot swaps and streamlines wiring.

Model 4730 cord connector allows hot swapping of power supplies to backplane or rear enclosure. Connector has IEC C20 inlet on one side and IEC outlet on other, so it is not necessary to unplug supply when changing it. Power cord remains while supplies are swapped. Module can be inverted and used to fit male or female connection on either side, depending on configuration. Single-piece module...

Read More »

All Topics