SCHURTER Electronic Components

Shock-Safe Fuseholder is designed for surface mounting.
Architectural & Civil Engineering Products

Shock-Safe Fuseholder is designed for surface mounting.

Made of RoHS-compliant, heat-resistant materials compatible with reflow solder processes, FPG7 is suited for multi-port protection of stacked PCBs where horizontal access to fuses is essential. It accepts 5 x 20 mm cartridge fuses and includes fuse carrier with screwdriver slot or fingergrip knob. While UL-approved for 16 A @ 250 Vac and VDE-approved for 10 A @ 250 Vac, product has rated power...

Read More »
Controls & Controllers

Filtered Power Entry Module suits medical and IT equipment.

Series 5120 Filtered Power Entry Module is dimensioned as 1-stage filter for 1, 2, 4, 6, 10 and 15 A rated currents. Attenuation range is 100 kHz to 30 MHz range with leakage current of less than 0.5 mA for standard filter and less than 5 Â-µA for medical filters. Metal flange provides large contact area for optimal shielding at panel opening. Series fulfills requirements of IEC/EN 60950 and...

Read More »
Construction Equipment and Supplies

Appliance Outlets are rated up to 20 A at 250 Vac.

Offered with screw or snap-in mounting, Series 4797 high current appliance outlets are available in 7 variations to suit panel thicknesses from 0.8-3 mm. Connections can be made with 6.3 x 0.8 mm quick-fit terminals or solder tabs. Body is made from flame resistant thermoplastic UL94 V-0 while live parts are made of copper alloy to protect against corrosion. Outlets are built according to IEC...

Read More »
Blue Illuminated Switches suit dimly lit areas.
Electrical Equipment & Systems

Blue Illuminated Switches suit dimly lit areas.

Available in point or ring-lighted versions, Piezo and mechanical Metal Line switches are provided with optical feedback for on/off positions and custom legends for switching functions. Offered in blue, yellow, red, or green, with mounting dimensions of 16-30 mm, they are constructed of vandal-proof metal, and are IK 02-07 and IP 40-67 rated. Stainless steel models feature laser-etched letters...

Read More »
Controls & Controllers

Power Entry Module includes recessed switch.

Pre-wired circuit breaker and ac inlet combination, Series DF, is approved for rated currents of 1, 2, 4, 6, and 10/15 A, 125/250 Vac, 50/60 Hz. Circuit breaker includes manual reset feature with 1- or 2-pole thermal overload protection, or no bi-metal for 2-pole on/off switching only. Recessed switch prevents accidental actuation. Undervoltage release, to detect power loss and protect against...

Read More »
Controls & Controllers

Power Entry Module targets medical applications.

Snap-in Model KFA universally supports range of panel thicknesses from 0.8-3.0 mm and offers compact system for 1U devices where load must be protected against overcurrent at power source. Approved for 1-10 A at 125/250 Vac, 50/60 Hz, module provides inlet, 1- or 2-pole shock-safe fusedrawer, and EMC filter. Fusedrawer is available in finger-grip or extra-safe version, which prohibits users from...

Read More »
Electrical Equipment & Systems

Stainless Steel Switch powers up to 250 Vac.

Mounting in panel cut-out of 30 mm, Model MSM 30 provides large actuating area and actuation force of 4.5 N. Contact travel is 1 mm with fixed stop accompanied by audible click. Switching actuation is single-pole, momentary with NO and NC contacts. With water-resistant rating to IP67, switch is suited for equipment exposed to liquid spills, drips, leaks, or wash-downs. It operates in temperatures...

Read More »
Construction Equipment and Supplies

Cord Connectors provide angled mounting.

Rated for cordage up to 16/21 A, Plug Model 4789 and Connector Model 4790 are angled for close placement of equipment to wall, minimizing potential for tangling or tripping. Size of strain relief can be specified for 8.7 or 10 mm cable. Approved according to ENEC 16 A/250 V and 21 A/125, 250 V UL, CSA, rewireable connectors have pillar terminals and are suited for high power consuming equipment...

Read More »
Surface Mount Fuse is RoHS compliant.
Electrical Equipment & Systems

Surface Mount Fuse is RoHS compliant.

UMT 250 SMD fuse offers breaking capacity of 200 A at 250 or 277 Vac, or 100 A at 125 Vdc over current range of 315 mA to 4 A. Measuring 10 x 3 x 3 mm, unit replaces traditional axial or radial lead through-hole fuses, and is solder immersion compatible according to IEC 60068-2-58. Clear marking of rated currents make it suitable for pick and place operations in manufacture of power supplies,...

Read More »
Fuseholder Style Circuit Breaker is RoHS-compliant.
Chemicals & Gases

Fuseholder Style Circuit Breaker is RoHS-compliant.

Offered in push-to-reset configuration, lead-free T9 Series is designed with fuseholder body style and snap-in mounting (5/8 in. or 16 mm dia hole). Tripping operation is (cycling) trip-free, and terminals are Â-¼ in. or 6.3 mm quick-disconnect. Suited for use on equipment, product is rated for currents range of 5-16 A and is cURus approved at AC240V/DC48V for 5-8 A as well as AC240V/DC32V...

Read More »

All Topics