SCHURTER Electronic Components

Appliance Inlet withstands temperatures to 155°C.

Appliance Inlet withstands temperatures to 155°C.

Available in snap-in and screw-on mounting with solder, quick-connect, or screw terminals, 1681 series IEC 60320 style C22 inlet is ENEC approved for 16 A at 250 Vac and cCSAus approved for 21 A at 250 Vac. Inlet has max pin temperature of 155°C and operating temperature range of -25 to +155°C. Product meets protection class covered in IEC 60320 as well as requirements of IEC 60335-1.

Read More »
High-Current DC Interference Filter serves PV systems.
Electronic Components & Devices

High-Current DC Interference Filter serves PV systems.

Offered without ground capacitors to safely prevent any leakage of current to ground, FMER SOL series is designed for use on DC side of inverter in photovoltaic (PV) and other DC systems. Products are designed for rated currents from 25–2,300 A with standard ambient temperature rating of 55°C. Series is also rated at 75°C ambient up to 1,200 Vdc with corresponding current...

Read More »
Compact Filtered Inlet withstands high-temperature environments.
Construction Equipment and Supplies

Compact Filtered Inlet withstands high-temperature environments.

Rated at 155°C, C22F appliance inlet with power line filter suits equipment requiring electrical components rated for high ambient temperatures. Chamfered shape of inlet differentiates its style according to IEC 60320 C22, and power line filter is rated for ambient temperatures up to 16 A at 75°C and 20 A at 65°C. Filters are available in standard and medical versions suitable...

Read More »
IP65 Circuit Breaker is offered with antibacterial cover.
Chemicals & Gases

IP65 Circuit Breaker is offered with antibacterial cover.

Available in 1-, 2-, and 3-pole versions with illuminated or non-illuminated rocker switch, TA35 features thermal overload protection and is offered with protective cover that is antibacterial effective according to ISO 22196. IP65-rated product, which is cURus and VDE approved, withstands use of common cleaning agents and disinfectants, is designed for snap-in mounting in panels from 1–4 mm...

Read More »
Hospital Grade Power Cordsets ensure patient safety.
Electrical Equipment & Systems

Hospital Grade Power Cordsets ensure patient safety.

In medical/dental applications, V-Lock power cords protect against unintended equipment disconnect. Plug end of cordset meets UL 817 requirements, and solid pin construction and extra-safe wiring are visible through transparent material. Lever on cord connector latches into notched power inlet, and ground contact has make-first and break-last configuration. Detachable hospital grade power cords...

Read More »
High Voltage Fuse offers overcurrent protection to 500 Vac.
Electrical Equipment & Systems

High Voltage Fuse offers overcurrent protection to 500 Vac.

With breaking capacity of 1,500 A at rated voltage, Series SHT 6.3 x 32 mm Fuse safeguards electronic systems and operators in event of catastrophic short circuit incident. Unit is available in 10 rated currents ranging from 1-8 A. In addition to panel or board mount clips and holders, fuse is available with pigtail leads for direct mounting to PCB. RoHS-compliant device, operating from -40 to...

Read More »
Heavy-Duty Clip accommodates high-voltage fuses.
Fasteners & Hardware

Heavy-Duty Clip accommodates high-voltage fuses.

Intended for use with 38 x 10.3 mm dia or 85 x 10.3 mm dia fuses, RoHS-compliant and cURus-approved CSO clip is rated for applications with voltages to 1,500 V AC/DC and currents to 32 A. Characteristics meet/exceed need for PV system voltages, and copper alloy and clamping force lend to minimal power loss. While solder type version allows direct mounting on PCB via through-hole technology,...

Read More »
Spacers/Standoffs have rugged, insulating design.
Fasteners & Hardware

Spacers/Standoffs have rugged, insulating design.

Made of studs and inserts molded in nylon body, Transipillars provide durable, insulated spacer system for board-to-board stacking or board-to-chassis mounting. Studs and inserts, made of galvanized steel and brass, are available in stud/stud, stud/insert, or insert/insert configurations with cylindrical or hexagonal body form. Pillar come in 13-64 mm lengths and can also be customized. Voltage...

Read More »
Quick-Acting Fuse has compact, surface mount design.
Electrical Equipment & Systems

Quick-Acting Fuse has compact, surface mount design.

With quick-acting characteristic according to IEC 60127-4, surface-mount UMF 250 provides overcurrent and short circuit protection for electronic systems in primary and secondary circuits. This Universal Modular Fuse carries current ratings up to 10 A at 250 Vac/125 Vdc and provides breaking capacity of up to 200 A at rated voltage. Featuring cURus and VDE approvals, RoHS-compliant product suits...

Read More »

All Topics