Oriental Motor U.S.A. Corp.
Torrance, CA 90503
New Stepper Motors Use a Neodymium Magnet in its Rotor Design
The PKP Series of stepper motors from Oriental Motors was recently expanded to include a 2-phase Flat Type and a 5-phase TS Geared stepper motor. The stepper motors now use a neodymium magnet in its rotor design which allows for a lower vibration when compared to the original PKP stepper motors. The 2-phase Flat Type is available in 2 frame sizes at 1.65 inches or 2.22 inches. The 5-phase TS...
Read More »
Oriental Motor Expands DGH II Series with 60mm Rotary Actuator, Eliminating the Need for Additional Sensors
The new 60mm DGH rotary actuator provides highly accurate positioning of large inertia loads while retaining the ease-of-use of its AlphaStep AZ series stepper motor. The product is compatible with four types of AZ series DC input drivers and is suitable for applications requiring step and direction. It is also ideal for using touchscreens or PLCs without the need for additional modules or...
Read More »
New CVK-SC Series Motor Speed Control System Improves Positioning Accuracy
The CVK-SC Series Motor Stepper Motor Speed Control System is available in 3 motor sizes and 2 driver types with 24 VDC power input. The system consists of a stepper motor, driver and a programmable controller. The CVK-SC series motor’s settings such as operating speed, acceleration and deceleration time and running current can be set through driver switches. The units offer a speed ranging...
Read More »
New 5-Phase PKP5 Stepper Motors Feature 1/4 in. Output Shaft
Oriental Motor’s 5-Phase PKP5 Stepper Motors are offered in 28 mm, 42 mm and 56.4 mm size mounting frame (NEMA 23). The motors are available with mini connector and encoder options for 42 mm, 56.4 mm and 60 mm frame size. Oriental’s CVD driver comes with advanced microstepping control, selectable step angle and microstepping filter control. The CVD drivers are offered with or without mounting...
Read More »
New 60 W Right-Angle Motor Comes with Hollow Shaft Right-Angle Hypoid JH Gearhead
Oriental’s 60 W Right-Angle Motor is equipped with a brushless BL5 motor. Unit is offered with IP66 connector that provides protection and allows connection between motor and driver with two orientation of cable outlet direction. JH gearhead delivers a maximum rated torque of 15.6 N-m via stainless steel metric output shaft and an output speed ranging from 80 to 3600 r/min.
Read More »
Latest AlphaStep Stepper Motor Systems are Offered with Mechanical Absolute Sensor
AlphaStep Closed Loop Stepper Motor Systems are used in Hybrid control system that is designed for monitoring motor’s position. The motors are equipped with planetary and harmonic gearheads that are available with gear ratios of 7.2 and 10:1 and 50 and 100:1 respectively. Gearheads come with built-in controller or pulse input type driver that reduces the generation of heat. AZ series motors are...
Read More »
New KII Series Motors are Suitable for Bi-Directional Operation
KII Series Reversible and Electromagnetic Brake Type Motors are offered in Imperial or Metric output shafts with output power ranging from 6 W to 90 W. Units are equipped with AC power-off activated type electromagnetic brake and friction brake. Units come with lead wires or optional IP66-compliant slim body terminal box. KII series motors are suitable for switching of rotational direction or for...
Read More »
New 1.8
Oriental Motor’s 1.8° PKP Series Stepper Motors are available in 42 mm and 56.4 mm frame sizes. Unit’s rotor comes with air gap of 30 µm. Motor uses neodymium magnet in the rotor design for reduced vibration. PKP Series motors are designed with increased bearing size and shaft for increased toque at low and high speeds.
Read More »
DGII Series Rotary Actuators come with DC input AZ Series driver options.
AZ Series D input drivers address the demand for a complete, high accuracy, energy efficient and cost saving rotary actuator systems. Models can work in traditional applications and without the need for additional and expensive module(s) added to the PLC. DGM85 and DGM130 DGII standard models with built-in electromagnetic brake have 24/48 VDC driver options and includes AZ Series Pulse Input...
Read More »
DRS2 Series Linear Actuator features adjustable pushing force and timing.
DRS2 Series Linear Actuators are offered in 42 mm and 60 mm models with or without a ball screw guide and electromagnetic brake. Units come with input drivers such as built-in controller, pulse input type or pulse input type with RS-485 communications. Actuators feature mechanical multi-turn absolute encoder and offer a repetitive accuracy of ±0.01 mm with rolled ball screw and ±0.003 mm with...
Read More »