Oriental Motor U.S.A. Corp.
Torrance, CA 90503
Stepping Motors produce up to 133 oz-in. of torque.
PK Series P-type models, available in 1.54 and 2.32 in. stack length models, respectively produce 55.2 and 106.2 oz-in. of holding torque when driven with unipolar driver and 69.4 and 133 oz-in. when driven with bipolar driver. Hybrid, 2-phase stepping motors have rated input current of 0.85 A per phase, bipolar, and 1.2 A per phase, unipolar. Integral 6-pin plug-in connector receptacle is...
Read More »
Gearmotor has 200 W output rating and small frame size.
BHF Series 50/60 Hz AC motor, with 4.09 in.-² frame, incorporates inverter speed control and choice of low-noise, pre-assembled gearheads. Gear ratios range from 5:1 to 180:1 for right angle series and 3:1 to 180:1 for standard parallel shaft series. Gearmotor shaft torques range from 14.1-530 lb-in. Dedicated inverter provides -
Read More »
Microstepping Motor/Driver offers position accuracy to
Nanostep-® CFKII Series miniature 5-phase hybrid motor is 0.79 in. sq and produces 3.2 oz-in. of holding torque. Motor/driver package creates microstepping system with low velocity vibration. Open frame modular driver provides 16 user selectable resolution settings up to 125,000 steps per revolution. Open loop driver has mid-frequency resolution suppression circuit and utilizes 24 Vdc and...
Read More »
Drivers/Stepping Motors include built-in resolver.
AlphaStep PLUS programmable systems are offered with motors in 1.65, 2.36, and 3.35 in. sq frames sizes for round shaft models or 3.54 in. sq for geared models. Holding torque range is 41.5 oz-in. to 327 lb-in. Driver-controller platform can be programmed in positioning, mechanical home seeking, continuous motion and electrical home seeking modes. Software allows user to control and link up to 14...
Read More »
Speed Control System provides high-accuracy regulation.
Brushless DC Series AUX, comprised of BLDC motor and speed control unit, provides 10, 25, 40, and 90 W output power levels. Available with single-phase 100-115, single-phase 200-230, and 3-phase 200-230 Vac power inputs, system does not require external DC power supply. Series maintains constant torque value over entire speed range of 100-2,000 rpm. It provides speed regulation of -
Read More »
Programmable Motion Controller simultaneously controls 2 axes.
Dual-axis Model EMP402 controls coordinated motion for dual 2- or 5-phase hybrid stepping motor systems. Up to 32 motion profile programs with total capacity of 1000 commands can be entered into controller via PC or terminal controller using RS232C communications port. EMP402 travels up to 16.777 million steps or -
Read More »
Linear Actuators come with or without anti-rotation guide.
Series DRL combines 5-phase hybrid stepping motor with ball screw in 3 frame sizes. Ground ball screw version, Model DRL28PA1-03D produces max thrust of 6.7 lb force over 1.18 in. stroke. Model DRL28PB1-03D has same force and stroke but achieves accuracy at -
Read More »
AC Gearmotors operate at noise thresholds of 29 dB.
V Series AC gearmotors incorporate strengthened shafts that mate to long life (10,000 hours) GV gearheads. Noise-reduction techniques include accurate assembly to micron level. Motors provide output power levels of 6 to 60 W, depending on motor frame size, and include induction, reversible, and electromagnetic brake motors. They can be supplied as 1-phase 110/115 Vac or 220/230 Vac as well as...
Read More »
Axial-Flow Fans offer 100,000 hour life expectancy.
Series MD1225, measuring 4.69 in. sq x 1.00 in. axial length, includes 2 models with 12 and 24 Vdc inputs. Maximum air flow is 95.3 cfm with maximum static pressure of 0.281 in. of H2O. Series MDE1451, measuring 5.51 in. sq x 2.01 in. axial length, includes 4 models with 24 and 48 Vdc inputs. Maximum airflow is 205 cfm with maximum static pressure of 0.521 in. of H2O. All are brushless, DC fans...
Read More »
Stepping Motor System provides high-accuracy positioning.
Miniature PMC Series 5-phase hybrid system includes printed-circuit driver board and miniature harmonic drive. Motors have zero-backlash harmonic gearheads in 50:1 (PMC33A1-HG50) and 100:1 (PMC331A1-HG100) gear ratios. Basic step angle performance reaches 0.0072-
Read More »