Eubanks Engineering Co.
Ontario, CA 91764
Share:
Heavy-Duty Coiling Pan supports up to 75 lb of wire.
Able to handle coil ODs from 12-24 in., Model 16800 collects lengths of single wires or batches of wire and cable as they are processed by stripping machine. It starts and stops in response to signal from cable stripper and coils properly during start-stop action encountered when marking wire. Along with top lip that keeps wire in place, product features internal Capstan/Coil Forming Frame, jog...
Read More »
Heavy-Duty Coiling Pan supports up to 75 lb of wire.
Able to handle coil ODs from 12-24 in., Model 16800 collects lengths of single wires or batches of wire and cable as they are processed by stripping machine. It starts and stops in response to signal from cable stripper and coils properly during start-stop action encountered when marking wire. Along with top lip that keeps wire in place, product features internal Capstan/Coil Forming Frame, jog...
Read More »
Adjustable Reel Stand features space-minimizing design.
Model 6835 does not require any lifting in order to load reels onto unit; reels up to 32 in. in diameter and 22 in. wide are rolled into place. Able to hold up to 300 lb reels, compact stand dereels tangentially to avoid line twist and may be moved around plant. Width is adjustable to fit width of reel, minimizing footprint and conserving floor space.
Read More »
Adjustable Reel Stand features space-minimizing design.
Model 6835 does not require any lifting in order to load reels onto unit; reels up to 32 in. in diameter and 22 in. wide are rolled into place. Able to hold up to 300 lb reels, compact stand dereels tangentially to avoid line twist and may be moved around plant. Width is adjustable to fit width of reel, minimizing footprint and conserving floor space.
Read More »Cable Stripper features tandem cutterheads.
Utilizing pneumatic drive, Model 4040 can strip tough insulations, such as cross-linked polyethylene, Teflon-®, nylon, and other wrapped or extruded insulations. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. OD. Strip assemblies feature double-acting clamp cylinders that provide up to 400 psi of gripping force and can grip wire...
Read More »Cable Stripper features tandem cutterheads.
Utilizing pneumatic drive, Model 4040 can strip tough insulations, such as cross-linked polyethylene, TeflonÃ-®, nylon, and other wrapped or extruded insulations. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. OD. Strip assemblies feature double-acting clamp cylinders that provide up to 400 psi of gripping force and can grip...
Read More »
Cable Stripper grips wire and cable from 0.187-0.625 in. OD.
Model 2940 Large Cable Stripper employs pneumatic drive that provides power for stripping cross-linked polyethylene, Teflon-®, Nylon, and other wrapped or extruded insulation. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force, and heavy-duty strip assemblies feature double-acting clamp cylinders. Unit uses die-type blades, is available with tooling for 2- and 3-stage stripping, and...
Read More »
Cable Stripper grips wire and cable from 0.187-0.625 in. OD.
Model 2940 Large Cable Stripper employs pneumatic drive that provides power for stripping cross-linked polyethylene, TeflonÃ-®, Nylon, and other wrapped or extruded insulation. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force, and heavy-duty strip assemblies feature double-acting clamp cylinders. Unit uses die-type blades, is available with tooling for 2- and 3-stage stripping,...
Read More »
Cable/Tubing Cutter cuts 4 in. pieces at 10,000 per hour.
Microprocessor-controlled Model 4600-03 automatically cuts flat cable, plastic tubing, wire, tape, and other linear material to preset lengths. Quick-release wire-loading mechanism reduces set-up time. User can program cut length and batch quantities by keyboard input. Cutting lengths can be set from .020-999.99 in. with batch capacity from 1-99,999 pieces. Unit converts from 110 to 230 V...
Read More »
Cable/Tubing Cutter cuts 4 in. pieces at 10,000 per hour.
Microprocessor-controlled Model 4600-03 automatically cuts flat cable, plastic tubing, wire, tape, and other linear material to preset lengths. Quick-release wire-loading mechanism reduces set-up time. User can program cut length and batch quantities by keyboard input. Cutting lengths can be set from .020-999.99 in. with batch capacity from 1-99,999 pieces. Unit converts from 110 to 230 V...
Read More »
Heavy-Duty Coiling Pan supports up to 75 lb of wire.
Able to handle coil ODs from 12-24 in., Model 16800 collects lengths of single wires or batches of wire and cable as they are processed by stripping machine. It starts and stops in response to signal from cable stripper and coils properly during start-stop action encountered when marking wire. Along with top lip that keeps wire in place, product features internal Capstan/Coil Forming Frame, jog...
Read More »
Heavy-Duty Coiling Pan supports up to 75 lb of wire.
Able to handle coil ODs from 12-24 in., Model 16800 collects lengths of single wires or batches of wire and cable as they are processed by stripping machine. It starts and stops in response to signal from cable stripper and coils properly during start-stop action encountered when marking wire. Along with top lip that keeps wire in place, product features internal Capstan/Coil Forming Frame, jog...
Read More »
Adjustable Reel Stand features space-minimizing design.
Model 6835 does not require any lifting in order to load reels onto unit; reels up to 32 in. in diameter and 22 in. wide are rolled into place. Able to hold up to 300 lb reels, compact stand dereels tangentially to avoid line twist and may be moved around plant. Width is adjustable to fit width of reel, minimizing footprint and conserving floor space.
Read More »
Adjustable Reel Stand features space-minimizing design.
Model 6835 does not require any lifting in order to load reels onto unit; reels up to 32 in. in diameter and 22 in. wide are rolled into place. Able to hold up to 300 lb reels, compact stand dereels tangentially to avoid line twist and may be moved around plant. Width is adjustable to fit width of reel, minimizing footprint and conserving floor space.
Read More »Cable Stripper features tandem cutterheads.
Utilizing pneumatic drive, Model 4040 can strip tough insulations, such as cross-linked polyethylene, Teflon-®, nylon, and other wrapped or extruded insulations. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. OD. Strip assemblies feature double-acting clamp cylinders that provide up to 400 psi of gripping force and can grip wire...
Read More »Cable Stripper features tandem cutterheads.
Utilizing pneumatic drive, Model 4040 can strip tough insulations, such as cross-linked polyethylene, TeflonÃ-®, nylon, and other wrapped or extruded insulations. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force to cut through insulated copper up to 0.625 in. OD. Strip assemblies feature double-acting clamp cylinders that provide up to 400 psi of gripping force and can grip...
Read More »
Cable Stripper grips wire and cable from 0.187-0.625 in. OD.
Model 2940 Large Cable Stripper employs pneumatic drive that provides power for stripping cross-linked polyethylene, Teflon-®, Nylon, and other wrapped or extruded insulation. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force, and heavy-duty strip assemblies feature double-acting clamp cylinders. Unit uses die-type blades, is available with tooling for 2- and 3-stage stripping, and...
Read More »
Cable Stripper grips wire and cable from 0.187-0.625 in. OD.
Model 2940 Large Cable Stripper employs pneumatic drive that provides power for stripping cross-linked polyethylene, TeflonÃ-®, Nylon, and other wrapped or extruded insulation. Dual-port, 6-stage cutterhead provides up to 1,800 psi of force, and heavy-duty strip assemblies feature double-acting clamp cylinders. Unit uses die-type blades, is available with tooling for 2- and 3-stage stripping,...
Read More »
Cable/Tubing Cutter cuts 4 in. pieces at 10,000 per hour.
Microprocessor-controlled Model 4600-03 automatically cuts flat cable, plastic tubing, wire, tape, and other linear material to preset lengths. Quick-release wire-loading mechanism reduces set-up time. User can program cut length and batch quantities by keyboard input. Cutting lengths can be set from .020-999.99 in. with batch capacity from 1-99,999 pieces. Unit converts from 110 to 230 V...
Read More »
Cable/Tubing Cutter cuts 4 in. pieces at 10,000 per hour.
Microprocessor-controlled Model 4600-03 automatically cuts flat cable, plastic tubing, wire, tape, and other linear material to preset lengths. Quick-release wire-loading mechanism reduces set-up time. User can program cut length and batch quantities by keyboard input. Cutting lengths can be set from .020-999.99 in. with batch capacity from 1-99,999 pieces. Unit converts from 110 to 230 V...
Read More »