Mark-10 Corp.
Copiague, NY 11726
New G1105 Cork Extraction Fixture Captures Peak Forces and Identify Pass/Fail Conditions
The G1105 Cork Extraction Fixture is used for the measurement of pull-out force of a cork stopper from a bottle. The unit is compatible with natural and synthetic corks and accommodates bottles sizes up to 1.5 L. It meets ISO 9727 standards and comes with Delrin surfaces that prevent marring and breaking the bottle during usage.
Read More »
Improving Gun Safety with Force Measurement
In an effort to reduce the incidence of accidental gun discharge, The New York City Police Department (NYPD) has been modifying their standard, off-the-shelf firearms to require a greater amount of force to activate the trigger. Following any shooting incident, the weapon is immediately sent to NYPD's Firearms Laboratory for a battery of tests. Among those tests, the trigger pull force was...
Read More »
Wire Crimp Pull Tester offers automatic operation.
Designed to measure pull-off forces of wire and tube terminations up to 200 lbf, Model WT3-201M is suited for laboratory and production environments. Unit accommodates wire sizes up to AWG 3, or custom sizes via machinable blank fixture. When wire sample has been loaded, auto-start automatically begins test, and test speed may be configured by user as required. On-board data storage and...
Read More »
Tension/Compression Force Tester is motorized and configurable.
Engineered on modular function platform, ESM303 single-column force tester is suitable for tension and compression measurement applications up to 300 lbF in laboratory and production environments. Single- and double-column extensions address larger sample application requirements, and FollowMe™ function facilitates test setup via hand-activated, force-based positioning. Test methods may be...
Read More »
Tension/Compression Force Tester has 1,500 lbf limit.
Available for laboratory and production environments, Model ESM1500 configurable, single-column force tester can be used with indicator-load cell combination or with- force gauge.- Hand-activated, force-based positioning simplifies test setup, while travel, clearance, and depth accommodate range of tests. Various test methods may be satisfied through control unit, allowing configuration of test...
Read More »
Digital Force/Torque Indicator offers sophisticated functions.
Offering functions for tension, compression, and torque measurement requirements, Model 7i- interfaces with Plug & Test™ remote sensors. All calibration and configuration data is saved within sensors' smart connectors, allowing interchangeability. Respectively, max capacities for force and torque sensors- are 10,000 lbF and 5,000 lbFin. Sampling rate- is 14,000 Hz, memory stores up to 5,000...
Read More »
Digital Force Gauges feature
With range of- capacities from 0.12–500 lbf,- Series 7 addresses tension and compression applications in medical device, pharmaceutical, packaging, consumer products, automotive, and aerospace industries. Gauges provide high-speed- continuous data capture and storage, with memory for up to 5,000 readings, at acquisition rate up to 14,000 Hz. Additional features include programmable...
Read More »
Digital Force Gauges offer capacities from 2-100 lb.
Designed for basic tension and compression force testing, Series 2 provides accuracy better than -
Read More »
Load Cell Adapter offers user-configurable functionality.
Satisfying applications in automotive, medical device, packaging, and other industries, Model PTA Plug- and Test™- adapts common strain-gage based load cells and torque sensors to Mark-10 universal force/torque indicators. Leads are connected via screw terminal block, and included software utility offers library of programmable capacities and resolutions. All calibration and configuration...
Read More »
Digital Torque Tool Tester stores up to 1,000 readings.
Suitable for production environments, Series TT02 tests manual and electric torque screwdrivers, wrenches, and other tools. Product captures peak torque in both measurement directions and also calculates first and second peaks. Sampling rate of 7,000 Hz and accuracy of -
Read More »Mark-10 Celebrates 40 Years in Business
Mark-10 Corporation is celebrating its 40th year of engineering and manufacturing force and torque measurement solutions. The company was founded in 1979 as an engineering consultancy, later expanding into complete product development services and contract manufacturing. PCB assembly originally took place on the founder’s kitchen table in New York City. A diverse array of projects through the...
Read More »
New G1105 Cork Extraction Fixture Captures Peak Forces and Identify Pass/Fail Conditions
The G1105 Cork Extraction Fixture is used for the measurement of pull-out force of a cork stopper from a bottle. The unit is compatible with natural and synthetic corks and accommodates bottles sizes up to 1.5 L. It meets ISO 9727 standards and comes with Delrin surfaces that prevent marring and breaking the bottle during usage.
Read More »
Improving Gun Safety with Force Measurement
In an effort to reduce the incidence of accidental gun discharge, The New York City Police Department (NYPD) has been modifying their standard, off-the-shelf firearms to require a greater amount of force to activate the trigger. Following any shooting incident, the weapon is immediately sent to NYPD's Firearms Laboratory for a battery of tests. Among those tests, the trigger pull force was...
Read More »
Wire Crimp Pull Tester offers automatic operation.
Designed to measure pull-off forces of wire and tube terminations up to 200 lbf, Model WT3-201M is suited for laboratory and production environments. Unit accommodates wire sizes up to AWG 3, or custom sizes via machinable blank fixture. When wire sample has been loaded, auto-start automatically begins test, and test speed may be configured by user as required. On-board data storage and...
Read More »
Tension/Compression Force Tester is motorized and configurable.
Engineered on modular function platform, ESM303 single-column force tester is suitable for tension and compression measurement applications up to 300 lbF in laboratory and production environments. Single- and double-column extensions address larger sample application requirements, and FollowMe™ function facilitates test setup via hand-activated, force-based positioning. Test methods may be...
Read More »
Tension/Compression Force Tester has 1,500 lbf limit.
Available for laboratory and production environments, Model ESM1500 configurable, single-column force tester can be used with indicator-load cell combination or with- force gauge.- Hand-activated, force-based positioning simplifies test setup, while travel, clearance, and depth accommodate range of tests. Various test methods may be satisfied through control unit, allowing configuration of test...
Read More »
Digital Force/Torque Indicator offers sophisticated functions.
Offering functions for tension, compression, and torque measurement requirements, Model 7i- interfaces with Plug & Test™ remote sensors. All calibration and configuration data is saved within sensors' smart connectors, allowing interchangeability. Respectively, max capacities for force and torque sensors- are 10,000 lbF and 5,000 lbFin. Sampling rate- is 14,000 Hz, memory stores up to 5,000...
Read More »
Digital Force Gauges feature
With range of- capacities from 0.12–500 lbf,- Series 7 addresses tension and compression applications in medical device, pharmaceutical, packaging, consumer products, automotive, and aerospace industries. Gauges provide high-speed- continuous data capture and storage, with memory for up to 5,000 readings, at acquisition rate up to 14,000 Hz. Additional features include programmable...
Read More »
Digital Force Gauges offer capacities from 2-100 lb.
Designed for basic tension and compression force testing, Series 2 provides accuracy better than -
Read More »
Load Cell Adapter offers user-configurable functionality.
Satisfying applications in automotive, medical device, packaging, and other industries, Model PTA Plug- and Test™- adapts common strain-gage based load cells and torque sensors to Mark-10 universal force/torque indicators. Leads are connected via screw terminal block, and included software utility offers library of programmable capacities and resolutions. All calibration and configuration...
Read More »