Deitz Company, Inc.
Wall, NJ 07719
Share:
New Heat-resistant Safety Strips for Protection when Set under Heat Shrink Tunnels
Set under an acetal, raised tabletop chain belt and span the length of heat tunnel in either single or dual tracks. Includes a variable speed drive, adjustable guide rails and leveling pads as standard. Available with solid brass for its ability to dissipate heat, prevent bacterial growth and resist wear over the long term.
Read More »
New Pharmafill TC3 Pill Counter Adjusts in Height to Accommodate Bottles up to 10 inches High
Features variable speed, vibratory feeder chute to allow precise control over the flow rate of tablets, capsules, pills, softgels, lozenges and solid dosage forms. Ideal for contract packagers and nutraceutical, pharmaceutical and cosmeceutical manufacturers. Counting speed is up to 2,500 tablets per minute or 60 bottles per minute while maintaining its 99.99% accuracy rate.
Read More »
Packaging Machinery Manufacturer Unveils Higher Speed Option on Automated Cotton Inserter
Deitz Company Speeds PharmafillTM CS2 Filling Rate by 12.5% Wall, NJ: Packaging machinery manufacturer Deitz Co., Wall, NJ (www.Deitzco.com), has unveiled an optional higher speed configuration on its PharmafillTM CS2 automated cotton inserter that increases the filling rate to 90 inserts per minute from 80 inserts per minute versus its standard configuration, a 12.5 percent increase. Developed...
Read More »
New Edge Detection System Designed to Promote Reliable, Unattended and Automated Operation
Ensures proper cutting from the strip to prevent double feeds that increase desiccant costs and miscuts. Allows the registration signal to be triggered by either the leading or trailing edge of the seam. Ideal for packaging foods, pharmaceuticals, supplements, nutraceuticals and other moisture-sensitive products.
Read More »
New Diagnostic Mode on Tablet Counters Enable Operators to Check Machinery Settings
Help optimize speed and accuracy, prevent operator error and uncover source of issue in need of troubleshooting. TC3 tablet counter counts at up to 2,500 pills per minute and TC4 electronic tablet counter fits on a common table or countertop. Pill counting machines automatically count transparent tablets, capsules, softgels, lozenges and discharge them into bottles with 99.95% accuracy.
Read More »
Pharmafill CS1 Cotton Inserter from Deitz Automatically Verifies the Presence of Cotton
Offered in 25-1/2 x 24-6/10 in. deep dimensions and fills 60 – 90 bottles per minute. Automatically separates cotton from continuous coil into individual pieces of uniform length, inserts the cotton into the bottle center. Designed for nutraceutical, pharmaceutical and contract packaging applications.
Read More »
New Pharmafill NB-1, Series II Neck Bander Delivers Speed Up to 100 Bottles per Minute
Accommodates heat-shrinkable banding materials ranging from 25 mm – 123 mm in width and 250 mm length on glass and plastic bottles. Offered with print registration option that enables tamper-evident shrinkbands that are applied to bottles with long necks. Suitable for packaging of wine, beer, liquor, soda, oil, sauce, dressing and variety of nutritional products.
Read More »
Deitz Company Introduces PharmafillTM TC4 to Provide Accurate, Automated Pill Counting Technology
Portable, compact machine measures 34 inches across x 21 inches deep x 30 inches in height for easy setup and movement. Counts and discharges the pills into bottles, shifting non-stop, back and forth, from the left discharge chute to the right. Automatically counts tablets, capsules, caplets, lozenges, softgels and other solid oral dose products with 99.95% accuracy up to 2,000 per minute.
Read More »
Clever Airguide System Achieves Consistent Accuracy Rates of 99.99 Percent at Peak Production Rates
Maintains a predetermined distance between each pill for proper presentation to the counting sensor. A built-in, double air filter ensures the air is free from oil and water vapor as an additional sanitary safeguard. Can be adjusted based on the size, shape and weight of the solid dosage as well as eliminates the use of mechanical diverters and their lubricants.
Read More »
New PS1 Packserter Uses Proprietary Cut Length Sensor System
The Pharmafill PS1 Packserter with cut length sensor system automatically verifies the dessicant, oxygen absorber before allowing it to be cut for inserting. The system is suitable for applications in filling and packaging of foods, pharmaceuticals, supplements, nutraceuticals and moisture-sensitive products. It allows desiccant insertion of one or multiple packets into the bottles at speeds of...
Read More »
New Heat-resistant Safety Strips for Protection when Set under Heat Shrink Tunnels
Set under an acetal, raised tabletop chain belt and span the length of heat tunnel in either single or dual tracks. Includes a variable speed drive, adjustable guide rails and leveling pads as standard. Available with solid brass for its ability to dissipate heat, prevent bacterial growth and resist wear over the long term.
Read More »
New Pharmafill TC3 Pill Counter Adjusts in Height to Accommodate Bottles up to 10 inches High
Features variable speed, vibratory feeder chute to allow precise control over the flow rate of tablets, capsules, pills, softgels, lozenges and solid dosage forms. Ideal for contract packagers and nutraceutical, pharmaceutical and cosmeceutical manufacturers. Counting speed is up to 2,500 tablets per minute or 60 bottles per minute while maintaining its 99.99% accuracy rate.
Read More »
Packaging Machinery Manufacturer Unveils Higher Speed Option on Automated Cotton Inserter
Deitz Company Speeds PharmafillTM CS2 Filling Rate by 12.5% Wall, NJ: Packaging machinery manufacturer Deitz Co., Wall, NJ (www.Deitzco.com), has unveiled an optional higher speed configuration on its PharmafillTM CS2 automated cotton inserter that increases the filling rate to 90 inserts per minute from 80 inserts per minute versus its standard configuration, a 12.5 percent increase. Developed...
Read More »
New Edge Detection System Designed to Promote Reliable, Unattended and Automated Operation
Ensures proper cutting from the strip to prevent double feeds that increase desiccant costs and miscuts. Allows the registration signal to be triggered by either the leading or trailing edge of the seam. Ideal for packaging foods, pharmaceuticals, supplements, nutraceuticals and other moisture-sensitive products.
Read More »
New Diagnostic Mode on Tablet Counters Enable Operators to Check Machinery Settings
Help optimize speed and accuracy, prevent operator error and uncover source of issue in need of troubleshooting. TC3 tablet counter counts at up to 2,500 pills per minute and TC4 electronic tablet counter fits on a common table or countertop. Pill counting machines automatically count transparent tablets, capsules, softgels, lozenges and discharge them into bottles with 99.95% accuracy.
Read More »
Pharmafill CS1 Cotton Inserter from Deitz Automatically Verifies the Presence of Cotton
Offered in 25-1/2 x 24-6/10 in. deep dimensions and fills 60 – 90 bottles per minute. Automatically separates cotton from continuous coil into individual pieces of uniform length, inserts the cotton into the bottle center. Designed for nutraceutical, pharmaceutical and contract packaging applications.
Read More »
New Pharmafill NB-1, Series II Neck Bander Delivers Speed Up to 100 Bottles per Minute
Accommodates heat-shrinkable banding materials ranging from 25 mm – 123 mm in width and 250 mm length on glass and plastic bottles. Offered with print registration option that enables tamper-evident shrinkbands that are applied to bottles with long necks. Suitable for packaging of wine, beer, liquor, soda, oil, sauce, dressing and variety of nutritional products.
Read More »
Deitz Company Introduces PharmafillTM TC4 to Provide Accurate, Automated Pill Counting Technology
Portable, compact machine measures 34 inches across x 21 inches deep x 30 inches in height for easy setup and movement. Counts and discharges the pills into bottles, shifting non-stop, back and forth, from the left discharge chute to the right. Automatically counts tablets, capsules, caplets, lozenges, softgels and other solid oral dose products with 99.95% accuracy up to 2,000 per minute.
Read More »
Clever Airguide System Achieves Consistent Accuracy Rates of 99.99 Percent at Peak Production Rates
Maintains a predetermined distance between each pill for proper presentation to the counting sensor. A built-in, double air filter ensures the air is free from oil and water vapor as an additional sanitary safeguard. Can be adjusted based on the size, shape and weight of the solid dosage as well as eliminates the use of mechanical diverters and their lubricants.
Read More »
New PS1 Packserter Uses Proprietary Cut Length Sensor System
The Pharmafill PS1 Packserter with cut length sensor system automatically verifies the dessicant, oxygen absorber before allowing it to be cut for inserting. The system is suitable for applications in filling and packaging of foods, pharmaceuticals, supplements, nutraceuticals and moisture-sensitive products. It allows desiccant insertion of one or multiple packets into the bottles at speeds of...
Read More »
