PNC, Inc.

Cleaning Products & Equipment

PNC Boosts Assembly Capabilities with New Electronic Cleaning System

PNC Inc. has announced another addition to its continually expanding assembly department: an inline electronic cleaning system called the Nanojet from Austin American Technology. Capable of both water and aqueous chemical cleaning applications, the NanoJet inline system also offers easy accessibility and simple maintenance to keep up with PNC's ever increasing needs while never sacrificing on...

Read More »
PNC Purchases Universal Pick and Place Equipment
Machinery & Machining Tools

PNC Purchases Universal Pick and Place Equipment

Sam Sangani, President and owner of PNC has announced that his company recently added a new Universal Pick and Place machine model Genesis GI-07 to its fast growing assembly department. Commenting on the acquisition, Mr. Sangani said, “This is a cornerstone piece of equipment for PNC Assembly at this time. Our goal as a true Total Concept company is to provide our customer with design,...

Read More »
PNC Purchases Real time X-Ray Inspection System - The Jewel Box 70T from Glenbrook Technologies
Fluid & Gas Flow Equipment

PNC Purchases Real time X-Ray Inspection System - The Jewel Box 70T from Glenbrook Technologies

Nutley, NJ: Sam Sangani, President and owner of PNC has announced that his company recently acquired a new X-Ray inspection system, the Jewel Box 70T from Glenbrook Technologies. This system has an 80KV micron focal spot x ray tube for up to 500X geometric and 1,200X electronic magnification. It allows x-y-z movement rotation and tilt with joy stick positioning. It can accommodate a 16 x18 inch...

Read More »
PNC Purchases Benchtop AOI / Company Continues to Buy Products of the Future

PNC Purchases Benchtop AOI / Company Continues to Buy Products of the Future

Nutley, NJ: Sam Sangani, President and owner of PNC has announced that his company recently acquired a Nordson YESTECH's BX Benchtop Automated AOI. The Nordson YESTECH's advanced 5 megapixel color camera imaging technology offers benchtop PCB inspection with exceptional defect coverage. It inspects solder joints and verifies correct part assembly enabling users to improve quality and...

Read More »
Machinery & Machining Tools

PCB Manufacturing Service meets MIL-PRF-31032 specification.

Under qualification of Military Performance Specification MIL-PRF-31032, CAGE Code 66766, PNC provides capabilities for Conductor Width/Spacing, Finish System, and Aspect ratio. Etch department can now etch minimum conductor width of .003 in./.003 in.Â- ENIG offers RoHS alternative to HASL, which is non-RoHS. In addition, Drilling/Plating department capabilities now include...

Read More »
PNC Inc. Acquires Pluritec Driller/Routers
Computer Hardware & Peripherals

PNC Inc. Acquires Pluritec Driller/Routers

Nutley, NJ – PNC recently acquired four Pluritec Multi-Station units, two Driller/Routers and two Drillers. These machines will complement our existing drilling and routing Departments with precision drilling/routing capabilities. The multi-station machines arepowered by linear motors which increasespeed, accuracy and productivity. The machines are also programmable with bit hit counting and...

Read More »
Materials

Polyimide Laminate and Prepreg feature UL qualification.

UL qualification of polyimide base materials VT-901 laminate and VT-901PP prepreg includes 0.002 in. inner layer cores and minimum overall board thickness stack up of 0.025 in. Furthermore, qualification of these high-temperature, high-reliability products includes minimum outer layer copper thickness of Â-½ oz copper and inner layer max of 2 oz copper.

Read More »
Materials

PNC Adds Ventec's VT-901 to Approved Material Listing

Printed circuit board (PCB) manufacturer PNC has added Ventec's VT-901 250Tg Polyimide to their internal approval and UL listing. This IPC4101C/42 addition will allow PNC to expand their offerings to its customers with commercial high operating temperature, high reliability, and military specifications and those with power supply and aerospace designs. PNC's sustained growth in the high...

Read More »
Company News

PNC Inc. Invests in State-of-the-Art 3D AOI System

PNC Inc. has recently come to an agreement with MIRTEC to purchase the MV-6 OMNI 3D AOI System. To be used in their assembly division, this purchased has bolstered their state-of-the-art equipment list even further. The award-winning MV-6 OMNI 3D AOI Machine is configured with MIRTEC's exclusive OMNI-VISION® 3D Inspection Technology which combines our 15 Mega Pixel CoaXPress Camera...

Read More »
Company News

PNC Inc.'s BGA Assembly

Capabilities: At PNC Inc., with state-of-the-art BGA placement equipment, refined BGA assembly processes and X-ray test equipment, we can build high-quality BGA boards. PNC’s SMT production teams carefully review PC board files, BGA datasheets and BGA ball sizes to make an optimized custom thermal profile for each job. For example, when the ball size is larger than normal, the profile will be...

Read More »
Company News

CyberOptics SE500-II Solder Paste Inspection

PNC Inc. recently purchased an SE500-II solder paste inspection machine from CyberOptics. In addition to other recent purchases, this machine completes another fully-equipped, top-of-the-line assembly line for the company. The SE500-II can scan 30% faster than its predecessors thanks to its unique all-in-one scan sequence. This allows it to inspect PC boards at a rate faster than 80 square cm per...

Read More »
Company News

Accurate Engineering Inc. Recently Purchased an ATG A5 Flying Probe Continuity Tester

This machine uses 8 test probes, four on either side (Softtouch or Micro needle probes). The ATG A5’s smallest testable pitch is 4 mils. It can handle a PC board as thin as 0.05 mm and as thick as 2.5 mm with a maximum board size of 650 mm x 520 mm. This machine is also able to conduct high voltage tests as high as 500 V. To facilitate the further efficiency, the ATG A5 can handle flex and...

Read More »
Company News

PNC Inc. Recently Purchased Two Pick-and-Place Machines from Juki - the KE-3020VXL and the KE-3010XL

“2017 is going to be a year of significant investments and improvements,” said PNC Inc. President Sam Sangani. “These equipment acquisitions are just the beginning.” Both of these machines have extensive capabilities including accepting boards up to 22” x24” and supporting both electronic and Mechanical tape feeders. The KE-3020VXL and the KE-3010XL can hold up to 160, 8mm feeders...

Read More »
Company News

PNC Inc. Recently Made Yet Another Investment in its Pursuit to be as Energy Efficient as Possible: The GA 75 VSD FF, 100 HP Compressor

The efficiency of this machine is remarkable, not only because it can manage its own workflow, but because it will pay for itself in about five years through savings in electricity ($25,000 per year) - savings that will be passed on to PNC’s customers. This purchase stands as yet another testament to PNC’s commitment to the make-in-USA philosophy to bolster quality while still doing their...

Read More »
Company News

PNC Inc. Recently Purchased a 1913 Mark III Series SMT Reflow Oven from Heller Industries

In keeping with their commitment to continuous improvement, this machine will be a part of a new SMT line that is coming to PNC Inc. in the coming weeks. Said President Sam Sangani, “Although we have positioned ourselves as industry leaders, we still want to keep pushing the envelope.” He added, “We recognize there is no cap on quality so pursuing it is an ongoing endeavor.” The 1913 Mark...

Read More »
Company News

PNC Inc. Recently Launched their Design Webinar Series

In an attempt to inspire designers, engineers and everyone else to create new and revolutionary products, this webinar series will take the viewer on a step-by-step journey of how to design your product, bring it to market and tackle all the challenges that will be faced along the way. As of now, the first two episodes (Introduction and Episode 1) have been released. The introduction is simply an...

Read More »
Company News

PNC Inc. Recently Purchased an LED Laser Direct Imaging System from Miva Technologies

2000L 2LE, is capable of imaging a maximum size 24” x 24” PC board or film size. With any large format film, positional accuracy can be a challenge but the Miva’s dynamic scaling feature can increase accuracy to minimize tolerance build-ups during the imaging process. Due to Miva’s optical registration system, inner layer drill break-out will be reduced immensely on densely routed signal...

Read More »
Company News

PNC Inc. Announces New Sales Representatives on the West Coast

PNC Inc. is pleased to announce the addition of KT Technical Sales, as their newest sales representative for the West Coast. President of KT Tech, Mr. Ken Thompson has over two decades’ worth of experience in the industry and has a very competent staff. KT Technical Sales is an independent manufacturer representative firm serving California and the greater southwest area. They represent various...

Read More »

All Topics