Sandvik Coromant Co.
P.O. Box 428
Fair Lawn, NJ 07410
New CoroDrill DS20 Available in Coromant Capto and HSK Shank Types
DS20 indexable drills provide tool life improvements of up to 25% and productivity gains up to 10%. Versatile and cost-efficient, increasing tool life and productivity. New MDI provides high precision, excellent centering capabilities and reduced tool inventory.
Read More »
New-M30 and -L50 Geometries for Radius Inserts in Automotive and Aerospace Sectors
-M30 geometry optimizes groove milling of steel and cast iron automotive parts. Available for size 11 inserts with radius dimensions from 1.5 to 3.0 mm (0.059 to 0.118 in). -L50 geometry is offered for size 11 inserts with radius dimensions from 3.0 mm to 6.3 mm.
Read More »
New CoroBore 825 Dampened Fine-Boring Tool is Suitable for Process Stability
Suitable to every adapter size in assortment and deliver maximum performance. Comes with assortment of cartridges and can be utilized for back-boring applications. Covers diameters from 19 to 167 mm (0.748 to 6.575 inch).
Read More »
New Lightweight CoroMill 390 Available in 40 mm and 50 mm Diameter Variants
Light weight of tool minimizes vibration and improves security during machining with long overhangs. Delivers light cutting action for smooth cutting performance. Ideal to perform long-reach face milling, deep shoulder, side milling, cavity milling and slot milling.
Read More »
New CoroBore BC Cutters are Based on Eliminating Unnecessary Tool Changes and Reducing Cycle Times
Available with cutting diameters ranging from 20 to 200 mm and tool lengths up to 400 mm that depends on coupling size. Uses CoroBore® cartridges that are offered in radially and axially adjustable, axially adjustable only and non-adjustable configurations. Offered with coupling options such as Coromant Capto®, HSK Form A and ISO 9766 and ISO/Mas-BT/Cat-V tapers.
Read More »
Sandvik Coromant and WFL Millturn to Present the Latest CNC and Tooling Technologies
Presenting local manufacturers with solutions to increase productivity, reduce waste and streamline operations Scappoose, OR – On February 20 and 21, 2019, global technology partners Sandvik Coromant and WFL Millturn will host a joint event at the Oregon Manufacturing Innovation Center (OMIC), an industry collaboration and research facility helping to provide solutions for metals and other...
Read More »
New CoroMill 178 and CoroMill 180 Cutters Provide High Output and an Optimized Finishing Profile
CoroMill® 178S (solid carbide) is for use in applications where high-volume, high-rpm machining with long tool life is required. CoroMill® 178H (powder metallurgy HSS) is for general use on shoulders or small diameters. Offers high tool accuracy and provides good finishing profile of the gear and spline.
Read More »
New M5Q90 Tangential Milling Cutter is Designed for Cubing Applications
The Sandvik’s M5Q90 Tangential Milling Cutter can be operated in high-speed conditions of more than 20,000 rpm. The tool is fitted with PCD tangential inserts for stable cutting action. The cutter with PCD inserts provides 2-4 mm depth of cut in full engagement. The product comes with cutting data of 2,500 m/min and feed per teeth of 0.20 mm.
Read More »
New M5F90 Face-Milling Cutter Produces Improved Surface Finishing on Thin-Walled Aluminum Parts
The M5F90 Face-Milling Cutter offered in a design that performs both roughing and finishing operations. The unit is capable of machining up to 4 mm depth. The cutter features radial and axial stepped cutting edges for burr-free milling. The product is suitable for thin-wall milling operations on aluminum parts such as gearbox casings and housings.
Read More »
Sandvik Introduces CoroDrill 400 and 430 Drills Featuring Polished Flutes and Precision Coolant Holes
The CoroDrill® 400 and CoroDrill® 430 Drills are offered in N1BU solid-carbide grade and are used for machining of components in medium-to-large volumes. The CoroDrill® 400 comes with three flutes to increase stability and holding true position. The units are available as standard products in 5, 6.8, 7, 8.5, 10.2 and 12.5 mm diameters that correspond to M6, M8, M10, M12 and M14 thread sizes....
Read More »
New CoroDrill DS20 Available in Coromant Capto and HSK Shank Types
DS20 indexable drills provide tool life improvements of up to 25% and productivity gains up to 10%. Versatile and cost-efficient, increasing tool life and productivity. New MDI provides high precision, excellent centering capabilities and reduced tool inventory.
Read More »
New-M30 and -L50 Geometries for Radius Inserts in Automotive and Aerospace Sectors
-M30 geometry optimizes groove milling of steel and cast iron automotive parts. Available for size 11 inserts with radius dimensions from 1.5 to 3.0 mm (0.059 to 0.118 in). -L50 geometry is offered for size 11 inserts with radius dimensions from 3.0 mm to 6.3 mm.
Read More »
New CoroBore 825 Dampened Fine-Boring Tool is Suitable for Process Stability
Suitable to every adapter size in assortment and deliver maximum performance. Comes with assortment of cartridges and can be utilized for back-boring applications. Covers diameters from 19 to 167 mm (0.748 to 6.575 inch).
Read More »
New Lightweight CoroMill 390 Available in 40 mm and 50 mm Diameter Variants
Light weight of tool minimizes vibration and improves security during machining with long overhangs. Delivers light cutting action for smooth cutting performance. Ideal to perform long-reach face milling, deep shoulder, side milling, cavity milling and slot milling.
Read More »
New CoroBore BC Cutters are Based on Eliminating Unnecessary Tool Changes and Reducing Cycle Times
Available with cutting diameters ranging from 20 to 200 mm and tool lengths up to 400 mm that depends on coupling size. Uses CoroBore® cartridges that are offered in radially and axially adjustable, axially adjustable only and non-adjustable configurations. Offered with coupling options such as Coromant Capto®, HSK Form A and ISO 9766 and ISO/Mas-BT/Cat-V tapers.
Read More »Sweden National Museum of Science and Technology "Maker Tour" Inspires NJ Students
Touring makerspace unit challenges Fair Lawn, NJ middle school students to imagine, innovate and create Fair Lawn, NJ – On March 4, 5 and 6, 2019, The Swedish National Museum of Science and Technology brought a makerspace on wheels group to middle school students at Thomas Jefferson and Memorial Middle Schools in Fair Lawn, NJ to raise interest in technology while promoting the value of...
Read More »
Sandvik Coromant and WFL Millturn to Present the Latest CNC and Tooling Technologies
Presenting local manufacturers with solutions to increase productivity, reduce waste and streamline operations Scappoose, OR – On February 20 and 21, 2019, global technology partners Sandvik Coromant and WFL Millturn will host a joint event at the Oregon Manufacturing Innovation Center (OMIC), an industry collaboration and research facility helping to provide solutions for metals and other...
Read More »
New CoroMill 178 and CoroMill 180 Cutters Provide High Output and an Optimized Finishing Profile
CoroMill® 178S (solid carbide) is for use in applications where high-volume, high-rpm machining with long tool life is required. CoroMill® 178H (powder metallurgy HSS) is for general use on shoulders or small diameters. Offers high tool accuracy and provides good finishing profile of the gear and spline.
Read More »
New M5Q90 Tangential Milling Cutter is Designed for Cubing Applications
The Sandvik’s M5Q90 Tangential Milling Cutter can be operated in high-speed conditions of more than 20,000 rpm. The tool is fitted with PCD tangential inserts for stable cutting action. The cutter with PCD inserts provides 2-4 mm depth of cut in full engagement. The product comes with cutting data of 2,500 m/min and feed per teeth of 0.20 mm.
Read More »
New M5F90 Face-Milling Cutter Produces Improved Surface Finishing on Thin-Walled Aluminum Parts
The M5F90 Face-Milling Cutter offered in a design that performs both roughing and finishing operations. The unit is capable of machining up to 4 mm depth. The cutter features radial and axial stepped cutting edges for burr-free milling. The product is suitable for thin-wall milling operations on aluminum parts such as gearbox casings and housings.
Read More »
