Master Bond, Inc.
Hackensack, NJ 07601-3950
Epoxy System is approved for NASA outgassing specifications.
With 10:1 mix ratio by weight, EP30LTE-LO room temperature curing epoxy system has CTE of 12 x 10-6 in./in. per -Read More »
Epoxy Adhesive is graphite filled and electrically conductive.
Two-component EP75-1 has 100 to 15 mix ratio by weight. It cures at room temperature or more rapidly at elevated temperatures. Adhesive develops bonding strength of more than 2,000 psi tensile shear when measured and cured at 75-Read More »
Epoxy Adhesive needs no mixing, cures at 175
One-component Supreme 3HT-80 has high shear and high peel strength, and resists impact, thermal shock, vibration, and stress fatigue cracking. It adheres to metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. Bonds resist water, oil, fuels and most organic solvents, even upon prolonged exposures. Operating temperature range is -100 to +350-Read More »
Adhesive is removed with acetone or ketone solvents.
Single component, flexible, UV curable adhesive UV14-3 cures at room temperature in seconds to 1 min. It is not oxygen inhibited and does not require inert atmosphere. It requires no mixing, and develops high bond strengths with metals, ceramics, glass, paper, plastics, and elastomers. UV14-3 has operating temperature range of -60 to +250-Read More »
Epoxy Resin System offers chemical resistance.
Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275-Read More »
Epoxy System meets NASA low outgassing specfications.
EP30-2 low viscosity, two-component system produces high strength bonds that are resistant to thermal cycling and chemicals. Resin system is 100% reactive and does not contain any solvents or other volatiles. Shrinkage upon cure is -0.0003in/in. Hardened resin provides electrical insulation. EP30-2 cures clear and is suitable for sealing, bonding, and laminating applications. Service operating...Read More »
Epoxy cures at room temperature.
Two part EP21TDC-4 for bonding, sealing, and coating applications cures at ambient or elevated temperatures. It has high peel strength, elongation of over 300%, and forms bonds that resist vibration, impact, and shock, plus fuels, water, oils, and many chemicals. No solvents or diluents are emitted during cure. It adheres to natural rubber, neoprene, nitride, and SBR rubber compounds without...Read More »
Epoxy bonds, seals and casts.
Flexible, 2-component EP21TPFL-1 polysulfide elastomer resists fuels, water, and aggressive chemicals. It cures at room temperature, is 100 percent reactive, and does not emit any volatiles during curing. Operating temperature range is -65 to +300 deg F. Thermal- and shock-resistant epoxy is available in 1/2 pint, pint, quart, gallon, and 5 gal kits, and in low and high viscosity versions.Read More »
Curable Elastomer offers alternative to RTV silicones.
UV curable UV21 elastomer compound offers fast-curing alternative to conventional moisture-curing silicone materials for use in seals, gaskets, bonding and protective coatings. It resists chemicals, has good electrical insulation properties, and is not affected by exposure to moisture and other hostile environmental conditions. It adheres to many plastics, including polycarbonates and acrylics,...Read More »