Master Bond, Inc.

Adhesives & Sealants

Cryogenic Epoxy Adhesive cures at room temperature.

Featuring 1:1 non-critical mix ratio by weight or volume, 2-component Supreme 11F adheres to metals, ceramics, wood, glass, and most plastics and rubbers. Solidification occurs in 5-7 min after mixing, and full cure is achieved in 4-5 hrs. With service operating temperature of -100 to +250°F, product resists vibration, shock, and chemicals. It can be applied with gun applicator, flexible...

Read More »
Adhesives & Sealants

UV-Curable Adhesive/Sealant has flexible formula.

Used for bonding and sealing, UV15X-5 single-component urethane elastomer withstands thermal cycling and mechanical shock. Its formulation exhibits abrasion resistance and forms chemical-resistant bonds between similar and dissimilar substrates. This 100% reactive product, which does not contain any solvents or volatiles, cures in thicknesses greater than 1/8 in. at room temperature upon exposure...

Read More »
Epoxy Adhesive exhibits 30 pli T-peel strength.
Adhesives & Sealants

Epoxy Adhesive exhibits 30 pli T-peel strength.

Resistant to vibration, impact, shock, and thermal cycling, 2-component EP21TDCHT bonds dissimilar substrates, including metals, glass, ceramics, rubbers, and plastics, with different coefficients of expansion. It cures at room temperatures and has service operating temperature range of -100 to +350°F. With 70 shore D hardness and tensile strength over 3,500 psi, bonds resist water, oils, and...

Read More »
Adhesives & Sealants

Adhesive/Sealant is 2-component, optically clear epoxy.

With 1:1 mix ratio by weight or volume, low-viscosity EP37-3FLF cures at room temperature and bonds to metal, glass, ceramic, rubber, and plastic substrates. Bonds offer resistance to impact, shock, and thermal cycling. Also usable as potting and encapsulation compound, product has service operating temperature range of -80 to +250°F, Shore D hardness of 30, and tensile strength of 4,000...

Read More »
Adhesives & Sealants

Single-Component Silicone works in temperatures to 572°F.

Used for bonding, sealing, coating, and formed-in-place gaskets, MasterSil 800 provides users with self-leveling, free-flowing, low-viscosity material capable of filling minute crevices and voids. Non-corrosive silicone elastomer compound is room-temperature curable and adheres to metals, ceramics, woods, rubbers, and plastics without aid of primer. It has tack free time of ~20 min at ambient...

Read More »
Adhesives & Sealants

Epoxy Adhesive passes NASA outgassing tests.

With operating temperature of 4°K to 400°F, thermally conductive, electrically insulative EP21TCHT-1 cures at room temperature or more rapidly at elevated temperatures. It features mix ratio of 100:60 by weight and mixed viscosity of light paste. Product is 100% reactive and does not contain solvents or diluents. It adheres to metals, ceramics, glass, wood, vulcanized rubbers, and...

Read More »
High-Temperature Epoxy cures at room temperature.
Adhesives & Sealants

High-Temperature Epoxy cures at room temperature.

Suited for potting, encapsulation, sealing, and bonding, Polymer System EP39MHT exhibits electrical insulation and chemical inertness for service up to 450°F. This 2-component system cures at ambient or elevated temperatures, is 100% reactive, and contains no VOCs. Able to bond similar and dissimilar substrates, cured product is thermoset solid featuring resistance to thermal and/or...

Read More »
Epoxy Adhesive resists exposure to repeated sterilization.
Adhesives & Sealants

Epoxy Adhesive resists exposure to repeated sterilization.

Resistant to thermal shock, EP45HT MED is formulated for use in assembly of reusable medical devices. This 2-component epoxy adhesive requires min heat cure of 250°F and withstands exposure to repeated cycles of radiation, steam (autoclaving), and chemical sterilants. Able to handle long-term exposure to temperatures from -80 to +500°F, cured system acts as electrical insulator and...

Read More »
Epoxy Adhesive offers flexible cure.
Adhesives & Sealants

Epoxy Adhesive offers flexible cure.

Nickel-filled, 2-component EP21TDCNFL is 100% reactive and does not contain solvents or volatiles. Product is prepared using 1:1 mix ratio by weight or volume, and once cured, has volume resistivity of less than 5-10 Ω/cm and tensile lap shear strength of 2,000 psi. Temperature range of 4°K to 250°F makes adhesive suited for cryogenic applications. Bonds offer thermal resistance as...

Read More »
Compound suits potting and encapsulation applications.
Adhesives & Sealants

Compound suits potting and encapsulation applications.

Two-component Master Bond EP30DP epoxy/urethane elastomer can be cast in thick cross sections without development of undue exotherm during cure. With service operating temperature of -80 to +250°F, product is formulated to cure at room temperature or more rapidly at elevated temperatures. Cured compound offers abrasion resistance and electrical insulation. Polymer system has Shore A...

Read More »

All Topics