Master Bond, Inc.

Two-Component Epoxy Adhesive gels in 3 minutes.
Adhesives & Sealants

Two-Component Epoxy Adhesive gels in 3 minutes.

Used in general-purpose bonding applications or as electrical insulator, Polymer Adhesive EP44 gels in 3 min and cures within a few hours at ambient temperatures to develop bonding shear strength of 3,150+ psi. Parts bonded with this solution can be safely handled within 30 min, and bonds are resistant to thermal cycling as well as chemicals over -60 to 250°F range. Product adheres to...

Read More »
Adhesives & Sealants

Polymer System suits high temperature bonding applications.

One-component Polymer System EP11HT cures in 110 min at 250°F or 75 min at 300°F. It attains tensile shear strength of greater than 3,300 psi to form rigid and dimensionally stable bonds. Resistant to acids and solvents, service temperature range is -60 to 400°F and it bonds to substrates including metals, glass, ceramics, and plastics. EP11HT is available in pint, quart, 5 gal...

Read More »
Cost Effective Anti-Static Electrically Conductive Latex Coating
Adhesives & Sealants

Cost Effective Anti-Static Electrically Conductive Latex Coating

Hackensack, NJ. December 26, 2007-Master Bond LTX-117G is low cost, electrically conductive, water-based adhesive, sealant and coating developed by Master Bond Inc., Hackensack, NJ. It is a one-part, UV stable latex adhesive where the electrical conductivity is achieved by the incorporation of non-metallic graphite filler. Master Bond Polymer System LTX-117G dries by water evaporation at ambient...

Read More »
Epoxy suits coating, sealing, and encapsulation applications.
Adhesives & Sealants

Epoxy suits coating, sealing, and encapsulation applications.

Curing at room temperature when exposed to UV light source, UV22 nanosilica-filled, one-component, UV-curable epoxy is not oxygen inhibited. Abrasion-resistant epoxy has service operating temperature range of -60 to +300°F and adding 195-257°F for 30 min gives it glass transition temperature of 275°F. It has Shore D hardness of greater than 80, tensile strength of greater than...

Read More »
Adhesive is heat, thermal cycling, and chemicals resistant.
Adhesives & Sealants

Adhesive is heat, thermal cycling, and chemicals resistant.

Formulated to cure quickly at ambient temperatures, Supreme65HT-6 produces bonds with tensile lap shear strengths in excess of 3,000 psi for service in temperature range of below -80°F to +400°F. It is resistant to vibration, stress fatigue cracking, moisture, creep, and corrosion. Available in pre-measured bubble packs, cartridges, Â-½ pint, pint, quart, gallon, and 5 gal...

Read More »
Silver Conductive Epoxy Adhesive exhibits high flexibility.
Adhesives & Sealants

Silver Conductive Epoxy Adhesive exhibits high flexibility.

With elongation of greater than 60%, Type EP21TDCSFL is 100% reactive epoxy adhesive that has has 1:1 mix ratio by weight/volume, does not contain diluents/solvents, cures at room temperature, and offers mechanical shock resistance and low outgassing properties. Features include volume resistivity of less than 10-3 W cm, tensile shear strength of greater than 1,500 psi, T-peel of greater than 30...

Read More »
Adhesives & Sealants

Silicone Compound has Shore A hardness of 45.

Suitable for high performance casting, potting, and encapsulation, MasterSil 151 two component compound is designed to cure at room temperature and is resistant to vibration, impact, shock, and thermal cycling. Features include service operating temperature range of -65°F to +400°F, elongation at break of 160%, 460 V/mil dielectric strength, volume resistivity of 1 x 1,015 W cm, and...

Read More »
Epoxy Resin cures at low temperature.
Adhesives & Sealants

Epoxy Resin cures at low temperature.

In 6 mil thick films, Master Bond EP27 will set in as little as 2 hr at 40°F and will cure in 48-72 hr. Product has non-critical mix ratio of 2:1 by weight or volume and mixed viscosity of 2,000 cps. Cured epoxy resin offers long-term resistance to immersion in aggressive solvents such as ethanol, toluene, butyl cellosolve, 70% sulfuric acid, 30% nitric acid, 50% sodium hydroxide, and...

Read More »
Adhesives & Sealants

Low Visocity Epoxy offers sub-zero curing.

Providing resistance to water and chemicals, 2-component EP37LV-1 Polymer System features tensile strength in excess of 8,300 psi, working life of 30 min at room temperature, and final mix viscosity of 5,000 cps. Full cures are obtained in 8-10 hr, while complete cures take longer at lower temperatures. Applications range from grouting, troweling and concrete patching in damp locations to marine...

Read More »
Transparent Epoxy is resistant to high temperatures/humidity.
Adhesives & Sealants

Transparent Epoxy is resistant to high temperatures/humidity.

With service temperature range of -60°F to over 400°F, Type EP30HT epoxy produces high strength, rigid, chemical resistant bonds, and adheres to similar and dissimilar materials such as metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Product attains shear bond strengths over 3,200 psi, with volume resistivity greater than 1,015 W-cm, dielectric strength of 440 V/mil,...

Read More »

All Topics