Master Bond, Inc.

Epoxy Adhesive encapsulates sensors in harsh environments.
Adhesives & Sealants

Epoxy Adhesive encapsulates sensors in harsh environments.

Combining quartz filler and amine compound, Supreme 45HTQ is suited for bonding and encapsulating transducers, gauges, actuators, and sensors in harsh environments. Epoxy adhesive features tensile strength exceeding 8,500 psi and compressive strength greater than 20,000 psi. Resistant to chemicals, acids, oils, water, and steam, product can withstand long term exposure to 400-500°F...

Read More »
Heat Resistant Epoxy Adhesive provides high strength bonds.
Adhesives & Sealants

Heat Resistant Epoxy Adhesive provides high strength bonds.

Withstanding long-term exposure to wide temperature ranges between -100 and +500°F, two component Supreme 46HT-2 delivers high performance structural bonding to both similar and dissimilar substrates. It has mixing ratio of 100 to 30, and cures at elevated temperatures of 250°F min. Applications include aerospace, electronic, metalworking, transportation, appliance, and chemical/oil...

Read More »
Adhesive for Fiberglass Remarkably Resistant to High Temperature
Adhesives & Sealants

Adhesive for Fiberglass Remarkably Resistant to High Temperature

Master Bond fiberglass adhesive EP33 facilitates the reliable bonding of fiberglass to a variety of different substrates. It has been specially designed to overcome CTE mismatch complications. Curing at room temperature, it produces durable, high strength, and tough bonds between fiberglass, wood, metals, vulcanized rubbers and many plastics. The cured fiberglass adhesive composition is an...

Read More »
Metal Bonding Epoxy offers optimal shear, peel strengths.
Adhesives & Sealants

Metal Bonding Epoxy offers optimal shear, peel strengths.

Formulated for service from -73°C to over +205°C, Supreme 11HT produces bonds that exhibit tensile shear strength in excess of 2,300 psi and T-peel strength of 25 pli. This 2-part structural adhesive, which is 100% reactive and cures at room temperature or above, does not contain any diluents, solvents, or hazardous ingredients. Formula is resistant to impact, thermal shock,...

Read More »
Epoxy Adhesive/Sealant meets NASA low outgassing requirements.
Adhesives & Sealants

Epoxy Adhesive/Sealant meets NASA low outgassing requirements.

Offering optical clarity and chemical resistance, UV10TKLO-2 is not oxygen inhibited and cures rapidly at room temperature when exposed to UV light. Maximum UV absorption takes place in 320-365 nm range. One component, modified epoxy system has volume resistivity of greater than 1014 W cm, dielectric constant of 3.6 at 60 Hz, and service temperature of -60 to 300°F. Product is suited for...

Read More »
UV Curable Compound with Superior Gap Filling Properties
Adhesives & Sealants

UV Curable Compound with Superior Gap Filling Properties

HACKENSACK, NJ - Oct 29, 2009 - Master Bond UV10TK40 is a UV curable, no-mix epoxy resin system with exceptional sealing and gap-filling properties. It excels in applications such as aligning parts and bonding irregularly shaped surfaces, especially in production environments where increased speed and reduced waste are paramount. Its very high surface hardness (Shore A >75) also makes it an...

Read More »
Potting Compound features 6 hr working life.
Adhesives & Sealants

Potting Compound features 6 hr working life.

Qualified for filament winding applications, EP29LP-1 exhibits physical strength that enhances component resistance to thermal shock. It adheres to various substrates, including optical fibers and fibrous reinforcements, and has bond strength of greater than 3,500 psi. With peak exotherm as low as 50°C, this 2-part, optically clear epoxy is resistant to chemicals and offers compound flow,...

Read More »
Epoxy Adhesive has linear shrinkage of 0.0003 in./in.
Adhesives & Sealants

Epoxy Adhesive has linear shrinkage of 0.0003 in./in.

Low viscosity, optically clear, two part epoxy compound, EP30LV-1 is formulated to cure at room temperatures, and forms bonds with both similar and dissimilar materials including metals, glass, ceramics, wood, vulcanized rubbers and many plastics. Electrical insulator adhesive requires only contact pressure for curing. Suitable applications include optical, electronic, electrical, computer,...

Read More »
Epoxy Adhesive suits temperatures up to 600°F.
Adhesives & Sealants

Epoxy Adhesive suits temperatures up to 600°F.

Designed to withstand severe and repeated thermal cycling, Master Bond EP46HT-1 has continuous service operating temperature range of -100 to +550°F and can withstand intermittent exposures up to 600°F. It has glass transition temperature of over 235°C and provides adhesion to metals, glass, vulcanized rubbers, and most plastics. Product cures rapidly at elevated temperatures,...

Read More »
Thermal Adhesive Film aids heat-transfer in electronic parts.
Optics & Photonics

Thermal Adhesive Film aids heat-transfer in electronic parts.

Thermal adhesive film FL901AO provides heat-transfer path between heat-generating components and heat sinks or other cooling devices. Curing in 1 hr at 250°F or 30-40 min at 300°F, B-stage adhesive-preform features thermal conductivity on level of 10 BTU-in/ftÂ-²hr°F and volume resistivity exceeding 10 x 1012 W-cm. Properties are maintained over temperature range of -100 to...

Read More »

All Topics