Master Bond, Inc.

Optically Clear, Low Viscosity, High Strength Two Part Epoxy System
Adhesives & Sealants

Optically Clear, Low Viscosity, High Strength Two Part Epoxy System

Master Bond EP30HV, a two component epoxy, features wide applicability in the electronic, electrical, computer, aerospace, automotive, optical, fiber optic, medical and chemical industries. Formulated for bonding, sealing, coating and casting applications where high strength and optical clarity are needed, it complies with FDA Chapter 1, Sections 175.105 for food applications. EP30HV offers high...

Read More »
Optically Clear, Two Component Urethane Modified Epoxy Gel Offers Dimensional Stability
Adhesives & Sealants

Optically Clear, Two Component Urethane Modified Epoxy Gel Offers Dimensional Stability

Featuring softness and resilience, Master Bond Super Gel 9 is a urethane modified epoxy gel that can be employed in a variety of applications. Some of the most common include the encapsulation of sensitive electronic parts and sealing optical components. This multifunctional system is also widely used in the aerospace, electronic, optical, electro-optical and other specialty industries. Super Gel...

Read More »
High Temperature Resistant B-Staged Adhesive Film Features Thermal Conductivity and Electrical Insulation
Adhesives & Sealants

High Temperature Resistant B-Staged Adhesive Film Features Thermal Conductivity and Electrical Insulation

In an effort to mitigate the more complicated preparation associated with B-staged epoxies, Master Bond developed FLM36 for bonding and sealing applications in the aerospace, electronic, opto-electronic and specialty OEM industries. This B-staged film eliminates mixing and measuring and is easy to handle. FLM36 can withstand temperatures up to 500°F and retains its high strength properties...

Read More »
Adhesives & Sealants

Epoxy Adhesive/Sealant/Coating cures over 170-175°F range.

Able to cure in 20–30 min at 170 to 175°F or 10–15 min at 250°F, Supreme 3HT-80 does not require any mixing prior to use, has unlimited working life, and can be stored in conventional refrigerators. Single-component, 100% reactive system, offering optimal properties when cured at 250°F, bonds to various substrates — metals, composites, glass, ceramics, vulcanized rubbers,...

Read More »
Adhesives & Sealants

Medical Grade Epoxy has high glass transition temperature.

Used for bonding, sealing, and coating, Master Bond UV10TKMed passes USP Class VI testing and meets requirements of ISO 10993-5 for cytotoxicity. One-part, optically clear system has service temperature range of -60 to +450°F and glass transition temperature that exceeds 140°C. Resistant to repeated sterilization, this 100% reactive product cures readily in 20–30 sec when exposed...

Read More »
Paints & Coatings

Conductive Sodium Silicate is available for EMI/RFI shielding.

Formulated for applications where EMI/RFI shielding is required, aqueous-based MB600S can be brushed or sprayed with proper equipment, will cure at room temperature in 24–48 hr or in 1–2 hr at 80°C, and has 0 to +700°F service range. Silver gray colored conductive coating, tested to IEEE 299, 2006 methods, exhibits effectiveness of 95–105 dB from 100 MHz to 2 GHz. Above 2 GHz,...

Read More »
Adhesives & Sealants

Addition Cured Silicone Meets USP Class VI and ISO 10993-5 Specifications for Biocompatibility and Cytoxicity

Formulated for medical device applications, MasterSil 153Med passes USP Class VI and ISO 10993-5 testing. This two part silicone with a paste consistency features a convenient one to one mix ratio by weight, and does not require exposure to air and humidity for cross-linking. It has a long working life of 5-7 hours and will not outgas while curing. As is true with most silicones, MasterSil 153Med...

Read More »
Two Part, Flame-Retardant Epoxy cures at room temperature.
Adhesives & Sealants

Two Part, Flame-Retardant Epoxy cures at room temperature.

Compliant with UL 94V-0 specification, EP21FRNS-2 epoxy has non-halogen filler and suits potting, encapsulation, and casting applications. Moderate viscosity epoxy features 1:1 mix ratio by weight and withstands exposure to chemicals, water, fuels, lubricants, and acids. Serviceable over -51 to +90°C temperature range, product bonds metals, glass, ceramics, and many plastics. It is...

Read More »
Chemical Resistant, High Strength Two Component Epoxy Withstands Elevated Temperatures
Adhesives & Sealants

Chemical Resistant, High Strength Two Component Epoxy Withstands Elevated Temperatures

With the ability to withstand acids, bases and many solvents, Master Bond EP62-1 is primarily used as an adhesive, sealant or coating where the epoxy will be exposed to very harsh conditions. This two part epoxy features thermal stability with a glass transition temperature exceeding 170°C. EP62-1 has a long working life of over 12 hours at ambient temperatures and a forgiving 100 to 10 mix...

Read More »
Dimensionally Stable Epoxy Based UV Curable System with High Temperature Resistance
Adhesives & Sealants

Dimensionally Stable Epoxy Based UV Curable System with High Temperature Resistance

Cures Completely Tack-Free Without Requiring UV Light HACKENSACK, NJ - Master Bond LED401 is a breakthrough system based on LED technology. This adhesive, sealant, coating and encapsulant cures tack-free upon exposure to a 405 nm wavelength light source, without any oxygen inhibition. Optically clear, it is also safer and easier to handle than similar UV systems as LED lights emit substantially...

Read More »

All Topics