Master Bond, Inc.

Adhesives & Sealants

Dimensionally Stable Two Component Urethane Modified Epoxy Gel Is Thermally Conductive

Primarily used for potting and encapsulation applications, Master Bond Super Gel 9AO is aÂ-  soft, urethane modified gel-like epoxy that offers thermal conductivity and electrical insulation properties. This two part system is also employed for bonding and sealing as it adheres well to a variety of substrates including metals, glass, ceramics and many rubbers and plastics. With a low...

Read More »
Toughened Two Component Epoxy Is Optically Clear and Resists Thermal Cycling
Adhesives & Sealants

Toughened Two Component Epoxy Is Optically Clear and Resists Thermal Cycling

Master Bond EP38CL was developed for bonding, sealing, coating and encapsulation applications that require toughness and durability. With a Shore D hardness exceeding 75, its toughness is a unique property that imparts resistance to rigorous thermal cycling, impact and mechanical shock.Â-  EP38CL cures at room temperature or more quickly at elevated temperatures and has low shrinkage upon...

Read More »
Flexible Two Component Epoxy System Features Electrical and Thermal Conductivity
Adhesives & Sealants

Flexible Two Component Epoxy System Features Electrical and Thermal Conductivity

Formulated with a silver coated nickel filler, Master Bond EP79FL is a two part, electrically conductive epoxy for bonding, sealing and coating applications. It has low volume resistivity of less than 0.005 ohm-cm and is suitable for a variety of uses in the electronic, aerospace, computer, semiconductor and electro-optic industries. In addition to its electrical properties, this system is very...

Read More »
Thermally Conductive Epoxy is also electrically insulative.
Adhesives & Sealants

Thermally Conductive Epoxy is also electrically insulative.

Used for such applications as bonding, sealing, glob top, and die attach, Supreme 3HTND-2GT is thermally stable, with service range of -100 to +400°F; dimensionally stable; and capable of withstanding thermal cycling and shocks. Single-component system does not require mixing and bonds to various substrates used in electronics, including metals, composites, ceramics, and plastics. Able to...

Read More »
Non-Drip Epoxy can be used in indirect food applications.
Adhesives & Sealants

Non-Drip Epoxy can be used in indirect food applications.

With thick paste consistency, Master Bond® EP21NDFG bonds toÂ- diverse substrates – metals, composites, glass, ceramics, rubbers, plastics – and will not run or sag even when applied to vertical surfaces. Bonds resist thermal cycling as well as chemicals, including water, oils, fuels, acids, bases, and salts. This 2-component, room temperature cure epoxy...

Read More »
Adhesives & Sealants

Thermally Conductive Two Component Silicone Meets UL 94V-0 Specification for Flame Retardancy

In addition to typical silicone properties such as flexibility and high temperature resistance, Master Bond MasterSil 156 passes the rigorous UL 94V-0 tests for flame retardancy. This two part silicone system is addition cured and does not require exposure to air for complete cross-linking. It has a convenient one to one mix ratio by weight and will not outgas while curing. Formulated for...

Read More »
Quartz Filled Two Component Epoxy Features High Temperature and Chemical Resistance
Adhesives & Sealants

Quartz Filled Two Component Epoxy Features High Temperature and Chemical Resistance

Master Bond Supreme 45HTQ is a thermally stable, two component quartz filled epoxy system. It features exceptional abrasion and chemical resistant properties. It will withstand exposure to petrochemicals, acids, bases and solvents. It retains its performance profile at elevated temperatures up to +450°F. Supreme 45HTQ has a 100 to 30 mix ratio by weight and offers a working life exceeding...

Read More »
Low Viscosity, Two Component Epoxy Has an Extended Working Life and Low Exotherm
Adhesives & Sealants

Low Viscosity, Two Component Epoxy Has an Extended Working Life and Low Exotherm

Suitable for large castings, Master Bond EP21LVSP6 combines a low viscosity and low exotherm with a working life of 3-5 hours. It can also be used for bonding, sealing and coating applications in aerospace, electronic, electrical, optical and other specialty industries. This two part epoxy offers has a non-critical one to one mix ratio, by weight or volume and its processing is facilitated with...

Read More »
Dimensionally Stable UV Curable System with a High Glass Transition Temperature
Adhesives & Sealants

Dimensionally Stable UV Curable System with a High Glass Transition Temperature

Suitable for high production applications, Master Bond UV25 offers fast fixture times, rapid curing and high temperature resistance. This multifunctional one component UV curable system was developed for bonding, sealing, coating and encapsulation applications. It is widely used in aerospace, fiber-optic, optical, electronic and related industries. Master Bond UV25’s most notable feature is its...

Read More »
Optically Clear, Low Viscosity, High Strength Two Part Epoxy System
Adhesives & Sealants

Optically Clear, Low Viscosity, High Strength Two Part Epoxy System

Master Bond EP30HV, a two component epoxy, features wide applicability in the electronic, electrical, computer, aerospace, automotive, optical, fiber optic, medical and chemical industries. Formulated for bonding, sealing, coating and casting applications where high strength and optical clarity are needed, it complies with FDA Chapter 1, Sections 175.105 for food applications. EP30HV offers high...

Read More »

All Topics