Master Bond, Inc.

One Component, Neutral Curing Silicone Passes USP Class VI and ISO 10993-5 Tests
Adhesives & Sealants

One Component, Neutral Curing Silicone Passes USP Class VI and ISO 10993-5 Tests

Specially formulated for medical device applications, Master Bond MasterSil 912Med is a room temperature vulcanizing silicone system for high performance bonding, sealing and coating. This system meets both USP biocompatibility and ISO cytotoxicity standards and resists a variety of sterilization techniques such as gamma radiation, EtO and some types of liquid sterilants. This one part system has...

Read More »
Epoxy Polysulfide System exhibits high thermal conductivity.
Adhesives & Sealants

Epoxy Polysulfide System exhibits high thermal conductivity.

Along withÂ- 9-10 BTU•in/ft²•hr•Ã‚°F thermal conductivity, EP21TPFL-1AO electrically insulative, 2-part system exhibits chemical resistance and offers 150%–200% elongation, 70-90 Shore A hardness, and 2:3 mix ratio by weight or volume. Black and white color coding facilitates mixing, and working life is 90–120 min at 75°F. Curing fully at ambient...

Read More »
Two-Part Epoxy Paste has ultra low thermal resistance.
Adhesives & Sealants

Two-Part Epoxy Paste has ultra low thermal resistance.

Master Bond EP48TC has thermal resistance of 5–7 x 10–6 K•m2/W, which enables thermal conductivity of 20–25 BTU•in/ft2•hr•Ã‚°F. Applied in bond lines as thin as 10–15 microns, epoxy paste has tensile lap shear strength from 900–1,100 psi and bonds to metals, composites, glass, ceramic, and plastics. Working life for 100 gram batch at 75°F is 90–120 min. Curing at...

Read More »
Low Stress, Optically Clear, One Part Silicone Meets NASA Low Outgassing Specifications
Adhesives & Sealants

Low Stress, Optically Clear, One Part Silicone Meets NASA Low Outgassing Specifications

Passing ASTM E595 testing for NASA low outgassing, Master Bond MasterSil 920-LO is a high performance, room temperature vulcanizing silicone for sealing, coating and small encapsulations. This single component system has a moderate, flowable viscosity and a solid electrical profile, which makes it well suited for conformal coating applications in the electronic and optical industries. Featuring a...

Read More »
Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion
Adhesives & Sealants

Two Part, Room Temperature Curing Epoxy Features Ultra Low Coefficient of Thermal Expansion

Master Bond EP42HT-2LTE is often chosen for a variety of bonding, sealing, coating and select casting applications in the electronic, aerospace, optical and specialty OEM industries. This two component epoxy has a flowable paste consistency that enables precise alignment with minimal fixturing. It cures at room temperature or more quickly with the addition of heat. This system is notable for...

Read More »
NASA Low Outgassing Approved, One Component Epoxy Features a Glass Transition Temperature of 225°C
Adhesives & Sealants

NASA Low Outgassing Approved, One Component Epoxy Features a Glass Transition Temperature of 225°C

Formulated to operate over the wide temperature range of -80°F to +650°F, Master Bond EP17HT-LO is a one part epoxy for bonding, sealing, coating and encapsulation applications. This low viscosity system has very low exotherm upon curing and can be cast in sections up to and beyond a Â-½ inch in thickness. As a single component system, it offers convenient handling, doesn’t...

Read More »
One Part Epoxy Resists up to 500°F and Meets NASA Low Outgassing Specifications
Adhesives & Sealants

One Part Epoxy Resists up to 500°F and Meets NASA Low Outgassing Specifications

Master Bond Supreme 12AOHT-LO is a one component epoxy for a variety of bonding and sealing applications in the aerospace, electronic, electro-optic and OEM industries. This system fully passes ASTM E595 testing for NASA low outgassing and is well suited for vacuum environments. As a toughened epoxy, Supreme 12AOHT-LO resists rigorous thermal cycling and shocks over the wide service temperature...

Read More »
Adhesives & Sealants

Thermally Conductive, Two Component Epoxy Passes USP Class VI Tests and ISO 10993-5 Specifications

With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for bonding, sealing, coating and encapsulation applications in the medical device industry. This two component epoxy system withstands a variety of sterilization methods, including EtO, radiation and many cold sterilants. EP21AOLV-2Med is thermally conductive and electrically isolating with a...

Read More »
Adhesives & Sealants

Low Viscosity, One Part Cyanoacrylate Is Non-Toxic and Meets ISO 10993-5 Specifications

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed production for disposable/reusable medical devices and passes ISO 10993-5 testing requirements. It also resists EtO and gamma sterilization processes. This single component ethyl cyanoacrylate cures rapidly depending upon the atmospheric humidity—the higher the level, the faster the rate of cure....

Read More »

All Topics